Jump to content

cristt

Members
  • Posts

    196
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by cristt

  1. If you are connecting your amp via the Amp Out jack, then the signal it's spilled before your cab block. So if you put some effects after the cab, you won't hear them.
  2. well just use one if you're fine with a mono signal. if you are using stereo effects, or you want to try stereo, plug one TRS for left and another for the right main outs, in two mixer channels and pan then hard left and right.
  3. hopefully, but I really don't think so.
  4. well that's why you don't hear anything... the pod go is your sound card how, so you have to connect speakers to it.
  5. maybe the whole point here is that you are approaching the unit as an engineer, not as a guitar player.
  6. For your basic needs you wouldn't even need to use snapshots. You may just go with presets, so you'd have 4 presets buttons right at your feet with the ability to do clean, semi-dirt, distorted, and another "bonus" one. And for your boost needs you might use the volume pedal: if you don't do volume swells and stuff like that, just move it at the end of the signal chain (to have a proper volume boost, not gain/distortion boost) and set it to be like 80% volume at heel position, and 100% volume for toe. So if you leave the pedal at heel position by default, there you have your boost solution.
  7. @Vics53 please bear in mind that grdGo33 has always been very critical, since day one, to line6 pod go, especially about the interface. And pretty much he's the only one complaining. The pod go is really easy to use, say 8.5/10, if not more. You can watch one of the Line 6 youtube tutorial videos or other tons from common users. It's not tedious. And you don't need to have pod go edit at all (apart from the things I've already written). And as for the cab swap example he's mentioning, that is totally crap...you only need to select the cab block and scroll the cabs, and you instantly hear how the cab sounds, while you are browsing them. You DO NOT NEED to select mic and distance UNLESS YOU WANT TO DO THAT, all the mic and distances are already set for you to a typical suitable value. And that is true for all the other blocks. So 3 and 4 of his points are completely...pointless. Number 1 point either, you don't have to be a tech. 95% of the problems are because people don't do the installation properly. That is essentially, installing the software without pod go being connected, and connect the pod go right after, to a usb port (not usb hub). Number 2: is pretty much solved with firmware upgrade, but is true someone is experiencing some blocks anyway here. So If you have a kemper at hand it is a very good maching and very good sounding unit, but a totally different beast, and really not as easy as the pod go. So, good luck...
  8. Did you connect some sort of speakers to the pod go main outs/phones? See manual from page 35.
  9. did you know that at least you can change the color of the multiple buttons? whatever last fx parameter you will save for that switch, that it will take the color (like green for delays, blu for modulations and so on).
  10. pretty strange, did you try to uninstall and reinstall pod go drivers?
  11. dropping to i3 is really not recommended! I would insted going up to i7! 8gb is minimum (I would go for more), the SSD is fine. plugins or VST instruments are pretty heavy, especially if you want to play with them in real time.
  12. yeah silverhead is right. if you think, your main out is connected to the fx return anyway, so even if you bypass the fx loop your signal will always pass through there. bypassing a block doesn't mean that the signal stops there, it just means is bypassed that signal elaboration point.
  13. welcome aboard vics. well first good news is that you don't necessarily need pod go edit to make your sounds on the pod go, the 95% of the stuff you can already do by tweaking the machine itself. you do will need to the software to upgrade the firmware, loading IRs (if you ever need them) and backup/restore your presets. it's pretty much it. Anyway the software is windows 7/8/10 compatible so you shouldn't have any problems, even if you are planning to use the pod go via usb as a USB audio device.
  14. you sure? I knew at least one or two amps are not there. if I go wrong, good to know.
  15. I quote phili_m the amp sims are the same of the helix series (except some missing if I remember) so top line 6 quality. you also can load IRs.
  16. Have you tried to recall the IR again from the cab/IR block on the preset?
  17. There are some similar posts around here on this forum. Check for your levels (linke line/amp level in global options). Might be an issue.
  18. cristt

    just got this

    the amp knob changes the volumes of your main outs but not for the amp out. for a live situation set your comfortable volumes on the frfr and try to set and forget the pod go volume knob. the sound guy will take care of your volume for the foh/mixer speakers during the performance.
  19. All of the above is correct, but apart from line6 reading this forum or not, the request for deleting won't be take in consideration anyway I guess. First, there's no point in "deleting" blocks, like you cannot delete presets, it's not inherent from a computational point of view. And if you mean "deleting" in order to free up space for adding blocks or blocks types, well, this is a Pod, and it's quite cheap, for a reason. If they'd allowed more freedom (i.e. a second DSP) the cost would had levitate and it would have been an helix series efx, not a pod. The design of this machine is meant to be simple. If you feel like being limited by the pod go, maybe it's not the gear for you, and you should aim from a helix stomp or another hx series unit.
  20. cristt

    Global eq help!

    Well the global eq default is just disabled (that is, all flat)! Global eq is applied to the final stage of the signal so it affects all the patches, but you don't need to pass al the patches and save them or whatever!! Just set the global eq to a flat line (and it does auto save whatever modification you do).
  21. none of that I am aware of being available. of course if you get some sort of slash custom tone, that would fit for sweet child. my suggestion would be to start from a custom tone (or build your own) and then shape it for the song, if needed. if you expect to bee spoon-fed, you're missing out a lot.
  22. first you need to un-set the wah activation assigned to the exp pedal. then you just need to assign its bypass state to whatever switch you want. you do it all in control/bypass page from the wah block.
  23. you need to hard toe press the exp pedal to switch of course. by default every preset has this feature. if that doesn't work try to upgrade the fw or reset the machine.
×
×
  • Create New...