Jump to content

ge31

Members
  • Posts

    34
  • Joined

  • Last visited

Everything posted by ge31

  1. HELIX 2.80 Same problems here with internal Expression Pedal.
  2. Just for information, I still have the problem with the Copy/paste Preset containing snapshots values on Variax. When copy/paste a preset from a setlist to another one or inside the same setlist, the Variax values of Volume and Tone knob affected to snapshot are not pasted correctly. After the paste I have Volume knob set to 0.5 and Tone knob set to "Don't force" in the helix editor and in th Helix I have Volume knob set to 0.5 and Tone knob set to 0.0 ??? I have open a support ticket, hope they will reproduce the issue.
  3. In fact after having quit Helix editor and start it again, I did the same copy/paste and now it works .... strange behaviour of the Helix editor.
  4. Hi All, Using Helix Editor 2.11 with FW 2.12, when I copy/paste a preset from a setlist to another one or within a same setlist, the snapshot values of the Variax are not copied. For example, I have a preset with 3 snapshots, each snapshot have a different Volume and Tone Knob value in my original preset whereas in the copied preset the values of the 3 snapshots are set to 0.0. Does anyone reproduce it ?
  5. ge31

    Snapshot Preference

    Thanks Uber, that's clear now.
  6. ge31

    Snapshot Preference

    Hi All, I don't understand in the Helix manual what "When set to "Auto Return," Helix returns to the previous footswitch mode after selecting a snapshot." mean. which "Previous footswitch mode" does mean ? Thanks for your help
  7. ge31

    v2.12 Observations

    Hummmm..... very strange here. I've update to 2.12 this week end and no problem with my preset using Variax model. As usual after each update the only thing I do, is the global reset and then set again Variax as "Preset" and not "Global".
  8. ge31

    Amp list Helix 2.12

    Hi all, Do you know where I could find an updated list of all available amp model from 2.11 firmware ? A list with the corresponding modelling real amp . Thanks
  9. Hi bruceleemani, I've got the same problem but more than 6 month after I receive the Helix, I send it back to my seller "Gear4music" that take in charge the fixing with Line6. I've got my Helix back 2 weeks after with the defect screen replaced. Every thing working perfectly.
  10. It cost me 9.99€ for the delivery with DHL and the the package is arrived today in UK :-)
  11. Hi All, After 8 month of good service, my Helix has got its first issue ;-(, a vertical line of dead pixel on the scribble strips of the footswitch 9, fortunately my Helix is under warranty. Gear4Music takes it in charge and send it to line6 UK for fixing. Attached some pictures. Hope it won't take too long to get it back ...
  12. I would like to know the excat value cause I have made an external LED VU-meter that has two input level (Low, High) and whatever the input I select, it is very difficulte to set the variable resistor on the input to define the 0dB on the VU-meter. I think I have to change the variable resistor range but would like to know the output impedance of the Helix to determine the good input impedance of my VU-meter.
  13. Hi All, Does anyone know what is the Helix XLR output impedance ? Thanks
  14. Hi, Does anybody know if it is possible to control the digital output from Variax knob ? That will be very usefull to control my feedback connected to the L6LINK of the Helix. Thanks GE
  15. I'm using "Mic" level for the XLR output when connecting to a mixer.
  16. I'm using the Helix connected to a L2T via L6link for my feedback that I manage with the "Volume" knob and XLR output connected to mixer/PA an let the sound engineer manage it. That's works perfect for me.
  17. ge31

    Creaking pedal

    As I have some experience in electronics, I have open my Helix. I've used a wristband link to the ground to avoid electric shock. I have unmounted the pedal and put some grease on the plastic washers then remount everything. That's very easy with an easy access. Now the creaks is gone but I've notice since the beginning that there is a certain losseness in the pedal axis specially if you press to strong with your heel when putting your foot on the pedal. Then after putting your foot no more creak.
  18. ge31

    Creaking pedal

    Hi All, Since one week the expression pedal of my Helix creaks, I've tried to unscrewed a bit but still the same creaking. How do you adjust your pedal ? Hard or soft ? I've got also loseness in the pedal axis, when putting my foot on the pedal it's creaking a lot. Should I have to open the helix and put some grease on the pedal axis ?
  19. Hi all, Just received my Phantom Blockers from TRITON and It works perfectly :-). Have fun with Helix.
  20. ge31

    Firmware v 1.05

    &nbsp No problem :-)
  21. ge31

    Firmware v 1.05

    Hi robbie61, How do you download the 1.05 Firmware update ? I don't find it from the line6 website. Don't try yet but perhaps you update it directly from Helix application ? Thanks
  22. I discover the problem today during my rehearsal with my band, very disappointed ...
  23. Hi all, I've received my Helix last week and after having tried all preset I decided to update the firmware ....... oh nooooooooo ! I'v got an "Update Failed" and at the restart, the Helix was blocking on startup screen with ":0" error code. I've tried to reset it several times using different combination of holding footswitch at switch on but no success. I've also try to install again the update from 2 other different computer and using an USB port at the back of the computer and not from a HUB. I called the line6 support in California and they ask me to send back the unit cause of a chipset problem :-(, They explain me that they've got few unit with this kind of problem. Now I'm waiting for my seller He received a new one ...
  24. ge31

    Factory reset?

    Hi jar1zx, Where d'you find this information on line6 ?
×
×
  • Create New...