acelab

See other thread regarding the covers: http://line6.com/support/topic/20715-helix-cover-custom-made-padded-cover/?fromsearch=1

As promised above I've already updated the full-site PDF download to v2.00 and Jason has already added it to his page. Rock on!

Got mine from Thomann last month already. Yes, The transmitter is sticking out but that's what a cable also does... Looks pretty solid to me and I replaced my G30 with the G10 (2nd best decision after buying the Helix ;) ).

Yes, they are on vacation until tomorrow (as I wrote above). Usually they have covers for dozens of devices listed but you want to have a custom logo (copyrighted material excluded) anyway - otherwise the default will be the word "Custom" on all covers. Here you'll find the link to the Helix-cover on EBay: http://www.ebay.com/itm/141986627069 It's on sale for 30.60 US$ + 19 US$ shipping.

Can image he would but then someone would need to ship it to all buyers within the US. Sounds complicated. On the other hand spending 50 bucks on a nice cover for a 1500 dollar device still sounds reasonable.

It sits on top, backside is half open (no velcro).

Shipping to the US is 25$ with tracking or 15 without I believe.

Hi All, as there seems to be some interest and not everyone is reading the "Show Us Your Helix Rig Setup"-thread where I had posted it originally I'll start a dedicated thread for this. AmpCovers.org offer these, see: http://www.ampcovers.org or their shop on eBay: http://www.ebay.com/usr/amp_covers It's a small Bulgarian company and Jordan ships worldwide, within a few days for custom text/logo. He is super friendly, responsive, reliable and fun to deal with! The covers are top quality, perfectly fitting. (I'm not affiliated with them, I recommend them just because they fully convince me and I'm a happy customer.) *Jordan is on vacation until Friday May 27th* Here are some pics: Outside with custom logo (can be anything else as well), price was US$34 Rear side view. Cover allows cables attached while it's on: Inside lining (hard to see on the pic) is crushed-velvet, nice & soft and a good padding between inside and outside: They will make any cover you want, I had also make them one with custom label for my Boss RC-300: Hope you find this useful. Rock on!

No, not at all. The inner side of the cover is some sort of crushed velvet and between this and the outside material there is some padding. As this might interest people not looking into this thread I've started a dedicated cover thread with some pics here: http://line6.com/support/topic/20715-helix-cover-custom-made-padded-cover/.

I'm not fully convinced of the RedWirez. I've tested a few/many IRs from Ownhammer, RedWirez and 3Sigma and my personal ranking is: 1. 3Sigma 2. Ownhammer 3. RedWirez 4. Internal Cab-Sim

AmpCovers.org offer these, see: http://www.ampcovers.org or on eBay: http://www.ebay.com/usr/amp_covers Jordan ships worldwide, within a few days for custom text/logo and is super friendly, reliable and fun to deal with! The covers are top quality, perfectly fitting. Fully recommended.

@glorioso: Thanks :) @regalpierot: You can't load a picture into the forum. Upload your photo to some picture-service like photobucket.com and insert a link to the pic there in your post here.

Here's my Helix rig: The Helix, 2x L2m on Zaor-Monitor-Stands, Relay G10, Boss RC-300, Zoom HD16, the custom padded covers and my axes on the wall (the Explorer has the G10-sender plugged in) :) The two L2m are connected to the Helix via L6Link. The RC-300 is connected to the Helix via stereo send/return loop (4 cables). The Helix main out goes into the inputs 1+2 of the HD16 for recordings. The HD16 main outs go to studio monitors. Last pic shows the custom padded covers.

I have the G10 since yesterday and there is no latency/delay in combination with the Helix.

But the L2t (or L2m) should neither sound boomy nor harsh. Instead they sound great a make the ideal companion for the Helix in my opinion. I run my Helix via L6link in stereo into two L2m and it sounds awesome. Maybe lower the output on the Helix and increase on the L2t and check if it makes a change. How does the L2t sound with other sources? (Not that you got a defective unit) I also thought it puts itself into Monitor-mode automatically when laid horizontally no matter what you set the switch to? How does it sound in upright position, any different?