Search the Community
Showing results for tags 'australia'.
Found 3 results
Hi guys, The D string on my Variax Acoustic 700 is electronically barely audible. I don't believe it's anything more than a problematic connection between the D piezo and the bridge PCB**. Can anyone name guys in or near Sydney Australia who've got experience with the insides of this guitar? And for the interim, any troubleshooting methods to help further diagnose where the problem sits? Thanks all, much appreciated. -Dawes **My reasoning for this is due to my experience with the guitar in the few months I've owned it. - Purchased in March/April from an interstate seller. - A friend living near seller tested guitar on my behalf, gave it the ok. - Friend loosened strings before he shipped the guitar to me. - Upon arrival, the D string piezo was barely audible. - I loosened string, carefully applied pressure to piezo and retightened string onto it. Success. - Some intermittent dropouts for a few days but got it under control and have had no further problems since March/April. - I recently loosened the strings; now D string is once again not working, this time it seems unfixable. (I did manage to get a very, very distorted -but appropriately volumed- note out of it briefly but I think that was a death rattle; hoping it's not the ribbon or PCB!)
hi there, I recently bought a used DT-50 112 combo, and to make it easier to switch between channels picked up a Boss FS-5L foot switch. Tried it out when i got it a few weeks ago, worked fine. Hadn't put the amp on for about two weeks, then tried it tonight and had issues. firstly when I put the TS cable into the foot switch input it would automatically switch from A to B, even when the foot switch itself was not connected. [never B to A though] I even had issues switching it back to A with the front selector switch. - I tried about six different TS cables, none of them worked with the foot switch. - Changed batteries in the Boss, [even though brand new], light would work to indicate it is working, but still no action on the amp. I then turned it off and back on again, holding down the channel select switch on the amp for six seconds. [read about it here somewhere, thought it couldn't hurt]. After this the foot switch input and the Boss would not change the channel, although the switch would. Could the jack input be damaged in some way? and is it an easy fix? other than that the amp is fine, but its an annoyance to not be able to switch channels easily with the new foot switch. Has this happened to anyone else, and what was your solution? Also, if needed, does anyone know the best place in Melbourne, Australia, to fix this type of issue? cheers, Sean
Hey, I just got a POD500 from the US. Obviously, the power adapter is different. I know the output is 9V - 3A. Will my Voodoo Labs Pedal Power 2 Plus power this up? or do I need to a) get a AUS Power Supply for the unit or b) get a step down transformer for it? Cheers. :)