rd2rk

Nor does everyone use a Tuner (the other function of FS 12). More of a shame IMO. As for future updates, I doubt there will be any changes to the basic operating functions. New/improved amps/FX/Cabs, bug fixes sure, but the major development energy will be going into the Stadium. From what I gather so far, the FS configuration will be much more flexible. Start saving your pennies...

Question 1 - When I bought my Cat I spent over a month comparing it side by side with a Katana Artist and my Helix with my PC212+. I knew that I liked it when I bought it and had already gone through the same process/experience as you. Still, I liked it even better after a while using it. That MAY be a result of speaker break-in, or it may just be a continuation of the learning process plus acclimatization of my ears to its sound. Psychoacoustics is a real thing. Question 2 - TBH, I bought the amp as an amplified speaker for my Helix that would be more portable than my PC212+ and could serve as a standalone backup to my Helix or simple grab'n'go for jams. Also, there's some days that the PC212+ just doesn't sound right. Psychoacoustics again. That said, over time I've come to appreciate that I can plug in, twist some knobs and find the exact sound that I didn't know I was looking for that day. Simple, old-school fun with amp and guitar, but 12 amps in one! My needs are pretty simple when it comes to effects, having grown up in the days of amps with built-in reverb tanks and tremolo (vibrato?) being all the effects we had. While I love being able to get wild and crazy with my Helix, sometimes simple is better. Play more, twiddle less. I don't play in a cover/tribute band. I've never been about trying to sound exactly like anyone other than myself. It's fun when I stumble upon the sound of some song that I really like, but I don't spend much time looking for it. In 5 minutes I'm bored and I've found some other sound I like and I'm off on that. Finally, there's an old saying - "Jack of all trades, master of none". If you want to sound like EVH you get a 5153, not a Fender Twin. Conversely, if you play surf music you don't get an Engl Fireball. The Catalyst is none of those, but it'll quickly get the essence of any genre, and that's all that matters to me. If I need more, I plug my Helix/HXS into the return. Tweaker Heaven!

Only reason I can see to use separate paths would be to use different FX on each path. I don't, so I always use Dual Cabs panned.

The SPLIT Y sends stereo signals to both paths. Your stereo delay is sending a MONO signal to both paths - Left to Path A R/L, RIGHT to Path B R/L. When you put a MONO CAB in a stereo path that collapses the path to MONO. Your Stereo Delay LEFT OUT is in Path A and its RIGHT OUT is in Path B. The MIX Block - where Path B rejoins Path A - can PAN Path A (which is now MONO) 100% LEFT and Path B (also MONO) 100% RIGHT. Your stereo delay will have its LEFT OUT in Path A and its RIGHT OUT in Path B.

Doesn't work that way. In the 10 switch setting and Stomp Mode you can have 5 top and bottom, but the MODE switch (6) is necessary to switch MODEs and the Tap/Tuner switch (12) is necessary for access to the Tuner and doubles as Tap Tempo even if you don't use it (I don't).

The functions I use most (FX BYPASS) are controlled with the switches on-board the Stomp. There're no MIDI commands for UP/DOWN. The ME's Toggle and Expression functions are on FS 4/5 (I have the HXS, it's 7/8 on the XL). There's no EXP OUT port on the HXS, only Exp IN, but you can also ADD additional Exp pedals via the Ampero (and most other MIDI controllers). I use MIDI to do things that would require changing the MODE on the HXS. For example, I leave the HXS in STOMP MODE and use MIDI to select PRESETS and SNAPSHOTS, toggle BYPASS on less used FX for which I'd otherwise not have enough switches onboard the HXS, control parameter settings, and to control other MIDI devices used in conjunction with my HXS such as ToneX, Catalyst and Powercab. Very powerful MIDI is.

Yes. That's one of the ones I use. Good, easy to program (good app) and cheap.

One of the outputs is for EXPRESSION and the other is for the FS that toggles EXP1/EXP2. So no, both FS7 and FS8 are taken. See page 63 of the XL manual. Again, time to look into a MIDI switch.

No, it's an expression pedal, not for audio. Time to look into a MIDI switch.

The defaults for Snapshots assigned to Stomp Mode switches is PRESS=NEXT; RELEASE=NONE. Keep in mind that in the target Snapshot that FS will be set to the defaults. IOW - If the preset loads SS1 and you set a FS in SS1 to PRESS=SS2; RELEASE=NONE, then unless you change it, that FS in SS2 (and all other Snapshots) will be set to the DEFAULTS. You need to manually set the FS to do what you want in EACH Snapshot.

Setting aside for the moment that this is a 2yo zombie thread and that there's STILL no one from L6 hanging around to see your post: This would be a relatively small market. Not everyone agrees that tubes are all that and fewer and fewer venues even allow amps on stage. Which tubes? EL34? EL84? 6L6? 6V6? Other? All? Which speaker? Celestion? Eminence? Jensen? Other? 12"? 10"? 8"? Other? 1? 2? 3? 4? Open back? Closed back? Convertible? How many watts? Attenuator? ASIO? There're just too many possibilities to make something that would appeal to a wide enough market to make it worthwhile to produce, it would be VERY expensive and it would compete with every tube combo that has an FX loop and is available for cheap on CL. I get why you want it, I just don't see it happening.

There're several possibilities, but I can't begin to guess the best one. Attach your preset and I'll have a listen to see which solution might work best for you.

I've mostly found those USB Ground Loop Eliminators to be a useless waste of money, but who knows? If the LED in question is just the HDD indicator, that should have no effect on the noise you're experiencing, but again, who knows? Computers are, after all, based on MAGIC, and only Great Wizards truly understand that - maybe.

This mistaken belief indicates that you are doing something wrong (or the delay is in the Mothership), and your description is insufficient to perform any analysis of the problem. The only delay between sounds that occurs with the XL (or any Helix product) is when changing PRESETS, not Snapshots. The Mothership manual seems to indicate that you need to count the milliseconds of LED ON/OFF time to know what programming mode you're in #!?!?. The editor seems to serve no purpose other than loading cab simulations. I've no wonder that you're having problems getting it to work. All I can do is to tell you how to get the XL to send PC messages using Snapshots. First, DL this: MIDIView - Free MIDI Monitor tool for Win & Mac In your XL's Global Settings>MIDI/Tempo be sure that the MIDI Base Channel (default Channel 1) matches the Mothership MIDI Channel - probably Ch 1, but the manual doesn't specify. Check that USB MIDI is ON (for MIDIVIEW) and MIDI PC Tx is OFF (prevents XL from sending the default PC# when switching XL presets). Don't worry about Snapshot CC Send as the Mothership only responds to PC messages, but considering the minimalist manual, you might want to leave that at the default of OFF just to be safe. For each XL Preset - 1) In Command Center, on Snapshot 1 (SS1), set Instant Command 1 (IC1 - the first lightning bolt) to the Mothership (MS) PC# you wish to load when that XL Preset loads. The other settings can be left at their defaults. SAVE THE PRESET! 2) Switch to SS2. Repeat step 1, entering the MS Preset you wish to load for that SS. SAVE THE PRESET! 3) Repeat for SS 3 and 4, SAVE after setting each! 4) Return to SS1 and SAVE! This ensures that SS1 loads with the Preset. Use MIDIVIEW to verify that each SS is sending the correct PC#. If it doesn't work, contact Tsakalis to get help configuring the Mothership. Good Luck with that! Attached is an example preset. I created it with my HX Stomp, so there's only 3 Snapshots. Calmandweird.hlx

In the editor, click and hold the block and drag it down, same as with the GAIN block that you moved to create the initial split. That causes the path to split into two output blocks - 1/2 and 3/4 - as in the example preset. On the HXS itself you accomplish the same thing using the ACTION button and selecting "Path B" using the first knob. This might be a good time to have a look at the manual...

Uninstall/reinstall drivers. Optimize the computer for audio - google it! Try a new usb cable. Make sure that phantom power is off. If you're connecting to the interface by wireless, use a cable. If you're using a desktop pc, try a backside usb port. If you're using a laptop, try a port on the opposite side of the laptop. Try disconnecting any other usb devices. Unplug the laptop and run on batteries. Borrow a friend's traditionally powered (not bus powered) interface. Make sure that you're at least 10-15 feet from microwaves, routers, cell phones or other wireless devices. Use a wall circuit that does not have fluorescents, rheostats, microwaves a/c or other motorized appliances. Make sure that you're connected to an emi/rfi filtered surge strip. If all else fails you can try voodoo...

While that works, USB 5/6 is DRY whereas my method allows for use of HXS FX in the PRE NAM position.

IDK what happened with the file upload, but I've reattached it and it SHOULD work now. See the highlighted dot where Path B merges back into Path A? That's the MIX block. All of the Inputs are USB. Sorry if that was confusing. Open the drop-down of the track's Input box. Select "Audio I/O Setup". Select the Inputs you want for the track. USB 1/2 is the default Master Outputs for all tracks. You can specify others, but that's not relevant here as USB 1/2 enters the HXS at the HXS MAIN Output, bypassing processing.

I have Studio 5 Artist, which I haven't used in years. I reinstalled it and once I configured my HXS I created a track, assigned Inputs 3/4 and disabled 1/2. The installation automatically found the NAM plugin and it works fine.

Split the main path using a GAIN Block and an A/B Split. Pull down the GAIN Block to create the split. PAN the A/B Split point 100% Path B. This blocks the output signal from the MAIN Out. Pull down the MIX point to complete the split. In your NAM Modeler SW/DAW use USB 3/4 as INPUT and USB 1/2 as OUTPUT. Example preset attached. EDIT: Thought I'd give NAM a try, since it seems to be the current "talk of the town". Standalone it wouldn't work with HXS using Input 3/4, though it worked with Input 1/2. As a plugin in Reaper using Input 3/4 it worked, so obviously a bug in the standalone version. I only tried one NAM capture so far, a MB IIC+, but comparing it to ToneX, HX Native and THU (with Rig Player LRS MB capture) I'm thinking "What's the big deal???" It's also kind of a memory hog for just a capture player and it glitches at the same settings I use for the others (48/64). I'll play around with it some more when I have time, but so far NOT impressed. HXS VST.hlx HXS VST.hlx

To hear ONLY the audio from the plugin you need to turn OFF the Cat's Channel Volume.

Attach a sample Helix preset and if possible, a recording of your POD version (exported as mp3 from a DAW) so we can try to see what's wrong.

Make sure that you've chosen the correct version for your OS (MAC or Windows). After clicking "ACCEPT AND DOWNLOAD" your OS should display a dialog asking where you want to DL the file to. After the DL go to the file location and install the program.

Something like this: Amazon.com: Lightning Hub iPad Adapter, 6-in-1 Lightning to HDMI Digital AV Converter, TF & SD Card Reader, USB Camera Adapter, Power Delivery Compatible with iPhone, iPad and More USB Devices : Electronics There're cheaper ones, but this one covers all of your bases - Cat60, MIDI controller, charger and more. This is a Lightning connector, but if your iPad is Type C just look for that.

This is a user-to-user support forum. No one from Line 6 hangs out here. Input/output/compression level indicators are present on the larger, full-featured products - Helix Floor, LT and Rack. This is likely due to design considerations (how much tech can we jam into this tiny box) and production cost considerations (how much are the people willing to PAY for all that tech?). NO amp sim that I know of has preset auto-levelling functions, likely due to the difference between ACTUAL volume in decibels (SPL) and PERCEIVED volume as in the difference between high gain (compressed) sounds and clean (full range) sounds. Robots are good at measuring things like SPL, but fall short in the area of perception, an annoying advantage possessed by the meat-sacks they're forced to serve.