boris_plotnikov

I use HX Stomp for two years, never had a described problem. Once in two years it gets frozen. And 3 or 4 times I had no sound just after I power it on. Power cycling always help. I love HX Stomp so much due to versatility and size but I am thinking of buying spare one.

Thank you very much! Now it works!

Thank you, I will try it

I didn’t make a backup )):

Today I upgraded my HX Stomp to firmware 3.0 and my regular setup stop working. I connect my iphone via usb cable and camera connection kit and I use TouchOSC software to send midi messages. No midi output from Touch OSC, nothing changes into HX Stomp. I tried two different USB cables, two different camera connection kits, I fiddle with midi settings in general settings. What do I miss?

LPD8 allows to assign pads as PC and CC

I currently use ipad with TouchOsc app to control my HX Stomp. I have assortment of presets on my screen (PC midi message) and some "rotating" knobs for delay, reverb and pitch mix (CC midi message). I am not completely happy using ipad as sometimes it lost connection with HX Stomp, sometimes TouchOSC freezes, I need to worry about keep ipad charged (yes, I can charge it while using, but if battery is empty it takes time to turn ipad on). I'd like to have something small and tabletop like AKAI LPD8 with 6-10 knobs/pads for choosing presets and 4-8 rotating knobs to control certain parameters of blocks. AKAI LPD8 looks cool, but I am not sure is it possible to map pads as PC and how to connect USB output of LPD to midi or USB input of HX Stomp. Any ideas how to setup LPD8 or something alternative.

1. I use HX Stomp for several month (about 20 gigs and a lot of practice) and twice I get strange flaw. I turn HX stomp on and no sound at all with any preset, while analog bypass sounds goes as usual. I reboot HX and it starts working ok. Not a big problem, but I'd like not to have it and I hope it'll not be more frequent. Does anyone else have the same issues? Firmware 2.71 2. I use Ipad via camera connection kit and usb cable to control changing presets and controlling effects using Touch OSC. I use PC commands to choose presets most of the time and it workds, but If I send commands too fast (random touches) or sometimes just use CC's to control, ipad stop working as controller and Line6 stops getting midi commands (ipad app show midi send). Unplugging and plugging it back helps. iOS version 8.1

I use HX Stomp for several month (about 20 gigs and a lot of practice) and twice I get strange flaw. I turn HX stomp on and no sound at all with any preset, while analog bypass sounds goes as usual. I reboot HX and it starts working ok. Not a big problem, but I'd like not to have it and I hope it'll not be more frequent. Does anyone else have the same issues?

I finally setup my ipad as controller for my HX Stomp (camera connection kit, usb cable, touchOSC app) and start successfully using it onstage. And my wishes goes deeper. I always thought about having small midi keyboard to press several chords on several songs, but I don't want to mess with setting up separate di channels, buy keys with own sounds or bring computer onstage. But now I have ipad onstage already, I have midi keyboard at my desktop (m-audio axiom 25), my HX Stomp also works as audio interface to ipad and I can send music from ipad to PA via HX Stomp. So I want to plug my midi keyboard via midi cable to midi input of HX Stomp, launch synth app on ipad and play some keys too. However my ipad don't receive any midi signal from my keyboard. What am I doing wrong? I check all midi parameters in different combination, I checked midi cable, I check midi input (HX Stomp receive CC from keyboard controllers) Again my setup is M-audio axiom 25 -> midi cable -> hx stomp -> usb cable -> camera connection kit -> ipad. Problem - no midi in from keyboard to ipad

I prefer operating by hand and made me expression2/fs4 box. One pot, one button, one TRS jack female, one trs-trs cable and 3 hours of making. Works perfect!

Thank you! Ordered camera connection kit!

And you connect HX Stomp via USB? What app do you like to use?

Still thinking how to make HX Stomp more controllable, while keeping portability. I've found such a product https://ru.yamaha.com/ru/products/music_production/accessories/md-bt01/index.html - bluetooth midi interface. Is it possible to send midi cc# commands from my ipad to my HX Stomp using this device? Will it work?

I prefer to keep FS3 for stomp instead of tap because it also have reminder what is programmed to it in this patch, and in some cases if I can't put pedal tabletop I need FS3 more than tap. I can bend to tap, while it is not so comfortable to bend for effect on off, this knob is small but not foot friendly.