Please ensure Javascript is enabled for purposes of website accessibility Jump to content


  • Posts

  • Joined

  • Last visited

Profile Information

  • Gender
  • Registered Products

jdavidboyd's Achievements

  1. You have to be certain that you have the sound of the preset turned up, as well as the amplifier volume. Which preset are you using? Is it something you created?
  2. There's no 'line out' jack, y'all must be referring to the headphone jack? And that cuts out the signal to the speakers... In other words, you can't blend the signal between the mic and line out. Unless, by line out, you're talking about the USB out, and have some kind of device that converts that to a suitable input for a PA. Is there such a device?
  3. I'll have to check that out. My delay time between switching was horrid, it would be great if it was improved.
  4. Everything I've tried has not worked.
  5. But, no sound signal should be going through the USB cable, so it seems you are introducing noise somehow through that cable. Do you have other power cords near the USB cable?
  6. First off, what is an IEC connector? I've got a place to plug in a network cable, and a headphone jack, on the back of my amp. I thought the power cord was hard connected, but maybe not, haven't moved it in a while. Anyways... Potting compound, to guard against vibration? Is if soft, or hardened? I mean, can you wipe it off with your hands, or is it solidified so you can't. How about a link to a picture. If it's soft, sounds like heatsink compound for thermal dispersion, but that would seem funny. Maybe it's a moisture barrier....
  7. Overheating of electronics can cause a restart, or a loose power connection. You have plenty of airflow space around your amp, and are all your power cord connections tight?
  8. Well, I'm surprised, as what tried didn't do anything. I loaded Bank1/Preset1 into the app, set the volume to 0, and loaded it back to the amp. Turned it off, back on, volume still where it was. I'll try it again tonight, using the volume knob instead. I KNOW something works, because my amp comes on at a much lower volume than when I first got it, so I changed something, somehow. I'll find it, and let y'all know.
  9. I'll check tonight when I get home, and let y'all know tomorrow. Sorry, should have checked already....
  10. When my 150 starts, it loads Bank 1/Patch 1. I set the volume of this preset, then saved it. I'm pretty certain it comes back on at the volume level I gave it. (But I'm not home right now to check).
  11. this is something everyone wants, but we're probably not ever going to get....
  12. Just to be sure, you have updated the Amplifi software to enable the USB port as an output, right?
  13. I'd start with turning the amp down, plugging into the headphone jack, and turning it up until you get good sound volume. You probably won't have to turn the amp up too loud, just be careful. I doubt that anything coming out of the headphone jack will have sufficient power to nuke your mixer, but be careful. I've done this many times, with several amps. Never had a problem, but be cautious.
  14. Where at? I don't seem to be able to locate it. I don't see a help section, manual, anything such as that.
  15. Really? I'll have to check that out when I get home to my music room tablet. Thanks for the info.
  • Create New...