Jump to content

titchyblackcat

Members
  • Posts

    214
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by titchyblackcat

  1. Thanks All. I'll try the suggestions.
  2. I tried that and the presets sound awful. Thanks, Ill try that first.
  3. Thanks, most of them are for variax so, i thought i'd try and make one of my own.
  4. Hi, I'm trying to get a Beatles Vox Tone, the question is. Which Vox on the Helix would be closest to the Vox that The Beatles used ?
  5. Thanks for the reply. I opened it up to make sure. It doesn't have a battery.
  6. Where will I find a gain block ?
  7. Many Thanks, I'll try your suggestions guys.
  8. LT sounds best for your needs.
  9. Hi, I'm trying to copy a preset that's on my v2 Pod but i can't get a tone near it on my Helix LT. The preset is Brit Blues with a line 6 4 x 12 cab (There isn't a Line 6 4 x 12 cab on Helix. Also on the POd v2 the brt button is pressed as is the drive button Also the delay is on which is 2ms 13% feedback and 65% level Any help would be appreciated
  10. OK Thanks guys. I'll just have to keep reloading the presets when i want to use it. How does it keep the memory if it doesn't have a Battery ? Capacitor ?
  11. Hi My HD bean is not keeping its presets after switching off. Does the HD bean have an internal battery that can be changed ?
  12. Hi Is it possible to change the global settings using HX Edit ? In the manual i can only see changing the Global Settings on the Helix unit itself.
  13. OK Thanks. I'll have to buy some XLR cables.
  14. I'm connecting my Helix LT to a mixer before it goes to a Native Instruments KA6 USB interface and then into my PC. I'm coming from the Helix with 1/4" jack cables. My mixer has Microphone in channels and Line In channels. So should the Helix be plugged into Microphone channels or Line In channels ? Also should i be using 1/4" jack cables or XLR cables ?
  15. I've just sold a Stomp and the new owner logged on and registered it to himself. So, make sure you keep the serial number somewhere safe in case it gets stolen
  16. I've decided to buy some new cables ( 2 Metres) to go from my Helix LT to a small mixing desk. They can be guitar cables or XLR cables. Can anyone recommend low noise cables for this that wont break the bank please.
  17. I know, I know, I can feel your smirks from here. Just re-booted pc and went for the update again and it went through this time. Back to my hours of un-bridled fun. (Not at all embarrassed)
  18. Have just done this and halfway through the firmware update it crashed my pc. Now when i start the Helix LT it says Boot Failure, Entered update mode. In the left hand corner of the display it says -3
  19. I've now just received a Helix LT Which software do I need ? At the moment i have HX Edit version 3.00 and the Helix LT is firmware 2.30.0 I've also noticed in the download section there's firmware and also flash memory what's the difference ? Do i need the drivers for usb etc ?
  20. Thanks guys. It seems because of European plugs being wrongly put in British units they usually check to make sure you've got the correct lead. So, panic over. now for hours of un-bridled fun.
  21. Thanks for the replies, i'm sort of dithering as to whether i should let this go or not. What it could mean is, Line 6 have a got a dodgy dealer who i may add hasn't replied to an e-mail i sent this morning.
×
×
  • Create New...