Search the Community
Showing results for tags 'dump'.
Found 3 results
Podxt Live - Flash Memory
flut posted a topic in POD 2.0, POD XT, Pocket POD, FloorPODsGood afternoon, I'm a proud owner of a PODxt Live for many years; It worked like a charm until a few weeks ago. Starting from the beginning, a year ago I broke the USB connector; Almost a month ago I decided to finally fix the USB port, so I changed the connector to a new one (I'm experienced with electronics), when I turned on the POD to try out the new USB connector, the POD simply wouldn't start; It flashed all the LED's and maintained them on, a brick with lights basically. The USB works just fine, I can access to the POD via PC but the Flash Memory is just not accessible; I checked every internal part on the POD, all the values are normal and nothing seems to be "broken". Is it possible that anyone can get me the Flash Memory full dump file of a PODxt Live so I can reprogram mine? Sorry for my bad English, Best Regards.
No More Dumping On M9 After Updating To 2.04
robbraga posted a topic in M5 / M9 / M13My M9 stops to dumping after download release 2.04. Does anyone has a tip about that?
Flextone III/HD147 Tone Transfers
Line6Tony posted a article in Flextone I / II / III / Duoverb / HD147Flextone III and HD 147 MIDI Sysex (Memory Dumps) There are 3 special hidden functions on the Flextone III that will transmit a Sysex message that can be recorded by a MIDI application, or sent to another Flextone III amplifier. 1. Presets & Amp Setups - To transmit all of your custom presets and Amp Defaults: press and hold theTap Tempo, Comp & Mod Select buttons while powering up the amp. Connect the MIDI out of the source amp to the MIDI In of your computer or another amp. (If you are connecting to another HD 147, you can power up the target amp normally.) Press the Delay Select button to send the message. 2. The Whole Enchilada - To transmit the entire memory of the amplifier including your custom presets, amp setups, and DSP software, (the brains behind the operation): press and hold the Tap Tempo, Gate & Mod Select buttons while powering up the amp. Connect the MIDI out of the source amp to the MIDI In of your computer or another amp. (If you are connecting to another HD 147, you can power up the target amp normally.) Press the Mod Select button to send the message. 3. The Edit Buffer - To transmit the current state of the amp, press and hold theTap Tempo and any of the A, B, C or D buttons.