Search the Community
Showing results for tags 'plus'.
Found 5 results
-
Please create a Powercab Plus 212 cabinet in vertical orientation. This would enable the user to save precious real estate on stage or in the studio. It would be great to have one with a straight bottom speaker and an angled top speaker, or both angled slightly up. A great example is Victory Amps 2x12 cabinets. Thank you.
-
My Floor Pod Plus turns on but doesn’t get any input signals, no even for tuning. Does anyone knows if there’s anything else I should do to have it working, besides turning on (with it’s proper power supply) and connecting the jack? -
Hey guys. I want to buy Floor POD Plus from a guy, but he has no power supply for it. I wanted to buy 9v AC 2000mA adapter for it, because i read that it's the default power supply for this POD, but it's expensive in here. Can I use an adapter with less miliampers than 2000? Like 1300 or smth? I can't find any information about this on the internet.
-
Hey! I just bought a Floor Pod Plus used. Wondering if there's a way to equalize all the output without having to manually do it? Like when I switch from 29A to 29B for example, the volumes are wayyy off.
-
Q: Where can I get a Floor Pod Presets Chart? FloorPOD Presets FloorPOD Plus Presets Q: What is the warranty on my Floor Pod product? A: The warranty on the Floor POD and Floorpod Plus units is twelve months from the date of purchase. Q: How can I download the manual? A: Manuals Q: What power supply do I need to use? A: The Line 6 PX-2 is the correct power supply for the Floor Pod and Floor Pod Plus. Q: What are the MIDI jacks on my FloorPod Plus unit for? A: The MIDI jacks on the Floorpod Plus are are used to connect to MIDI jacks to update the patches on your Floorpod Plus using the Vyzex editor. Q: Where can I download the editor for the Floor Pod Plus? A: You can download the Vyzex Floor POD plus editor directly from the Line 6 software downloads page:Line 6 Software Downloads Q: Is there a settings list for the presets used on the demonstrations? A:There is no documentation on the settings used for the Floor POD and Floor POD Plus demonstrations Q: How do I calibrate my Floor Pod/Plus Unit? Floor Pod Plus - Hold toe-switch on VOL/WAH and power unit. The display will read "PC" (Pedal calibration) and then "000". - With the pedal at toe-position, hit the "A" button. The display will show "100". - With the pedal at the Heel-position, hit the "B" button. The display will show "100" - Press footswitch C to read the numeric values. Press pedal-toe switch on and observe lights around effects encoder, which will reveal the pedal position. - Press and hold tap switch for 2 seconds to save calibration. Floor POD - Power off, Hold toe switch on pedal and power on. When "PC" appears press and hold DIST switch until a number flashes in the Display. - Move pedal from toe-down to heel-down position and back up to toe-down position clicking the Toe-switch. - Wait 5 seconds and unplug power. preset chart (rev a).pdf
