Bradburn1 Posted April 10, 2016 Share Posted April 10, 2016 Hello, Could anyone help me with the following please. When I select a tone using Cloud, it comes up on the amp display ok and works fine but I can't fathom out how to Save it to one of my presets. At the moment, having downloaded a tone and it appoearing on the amp display, if I then change the preset I lose it. How do I save the tone so it remains in the preset. Thanks, Derek B Quote Link to comment Share on other sites More sharing options...
jdebiase Posted April 12, 2016 Share Posted April 12, 2016 Hello, Could anyone help me with the following please. When I select a tone using Cloud, it comes up on the amp display ok and works fine but I can't fathom out how to Save it to one of my presets. At the moment, having downloaded a tone and it appoearing on the amp display, if I then change the preset I lose it. How do I save the tone so it remains in the preset. Thanks, Derek B You should be using the remote ap. With the Firehawk FX you select the tone you've downloaded from the cloud. Tweak it with the editor in the ap. If you are using an iOS device, look for the little square save icon and tap it. You'll get a pull down menu asking if you want to Save it to My Tones or the amp, etc. you should also get a choice about where to save it on the amp (bank location and foot switch ABC or D). Select one of those. If you are also using an FBV foot controller, you may be able to bank up or down and select a foot switch location from there as well. Then push and hold the foot switch button for a few seconds until the name changes in the display and it stops flashing. That's it!Jim Quote Link to comment Share on other sites More sharing options...
NBell Posted April 19, 2016 Share Posted April 19, 2016 Hello, Could anyone help me with the following please. When I select a tone using Cloud, it comes up on the amp display ok and works fine but I can't fathom out how to Save it to one of my presets. At the moment, having downloaded a tone and it appoearing on the amp display, if I then change the preset I lose it. How do I save the tone so it remains in the preset. Thanks, Derek B When saving a tone, its all about where you save it. With any tone, just press save (box top right corner) and press 'store on FIREHAWK'. When you do this, the list of stored tones in FIREHAWK will appear. You then press the location/existing tone and you'll notice that the new tone is in its desired location, then done. Quote Link to comment Share on other sites More sharing options...
jdebiase Posted April 20, 2016 Share Posted April 20, 2016 One more thing to remember with Firehawk and Amplifi products, when using the remote app to save a preset, you will get the pull down menu. If you choose save to amp or save to Firehawk FX, you will select a location by bank and Footswitch ABCD. if you choose a location including any of the factory presets, that preset will be over written! It's a good idea to save the older preset to "My Tones" first before over writing in case you want to retrieve it later! Jim Quote Link to comment Share on other sites More sharing options...
mskocic Posted May 1, 2016 Share Posted May 1, 2016 I am using an android device to modify my tones. When I go to save the modified preset my only choice is to save it to My Tones and not my Firehawk 1500. I do not get the dropdown choice. Is it a user error or am I just missing something? Quote Link to comment Share on other sites More sharing options...
mcbeddall Posted May 3, 2016 Share Posted May 3, 2016 I get this sometimes too Here is my workaround Save to my tones. View "my tones" (all your tones should be in a list) Select the tone you want to save to the firehawk In the top right of the screen you can select save to device 1 Quote Link to comment Share on other sites More sharing options...
DO_OK Posted January 21, 2017 Share Posted January 21, 2017 This whole saving patch process is lame! It should be one, two steps at most ("Are you Sure?"). You should be able to hold the button you want the patch saved to on the controller, and when it stops flashing, it's set. My Flextone 3 does this just fine. You certainly shouldn't have to 'sometimes' save it to the cloud, then get the option 'sometimes' to save to FH. It shouldn't 'sometimes' ANYTHING! It makes me just want to turn it off, and plug back into my Flextone. 1 Quote Link to comment Share on other sites More sharing options...
Rocco_Crocco Posted January 23, 2017 Share Posted January 23, 2017 This whole saving patch process is lame! It should be one, two steps at most ("Are you Sure?"). You should be able to hold the button you want the patch saved to on the controller, and when it stops flashing, it's set. My Flextone 3 does this just fine. You certainly shouldn't have to 'sometimes' save it to the cloud, then get the option 'sometimes' to save to FH. It shouldn't 'sometimes' ANYTHING! It makes me just want to turn it off, and plug back into my Flextone. I agree. It should be easier. I wonder if there will even be future updates. I'd be willing to bet all their code writers are working on Helix stuff. Quote Link to comment Share on other sites More sharing options...
ehshanzulfikar Posted December 16, 2017 Share Posted December 16, 2017 Why only 3 user writable banks on Line 6 Firehawk FX :( Quote Link to comment Share on other sites More sharing options...
zn8ke Posted December 18, 2017 Share Posted December 18, 2017 because you can overwrite all the presets .... 3 banks ie 12 patches... plus all the presets hould suffice or you are doing something wrong :) Quote Link to comment Share on other sites More sharing options...
jwlehman1 Posted January 4, 2018 Share Posted January 4, 2018 The Firehawk 1500 remote app seems to handle that...see image below Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.