Goooner1 Posted March 17, 2014 Share Posted March 17, 2014 Just got a DT25 yesterday and was playing around with it on it's own before hooking up my HD500X. I was just wondering, is there an equivalent of each of the four DT25 voices on the HD500X? Or if not what would be the closest to them? Or is it just a case of just plugging direct into the DT25 if you want to just use those four models? Quote Link to comment Share on other sites More sharing options...
radatats Posted March 17, 2014 Share Posted March 17, 2014 the DT models are the same as the POD HD models. Update your firmware and use the DT Edit program you can download from the sticky post in the DT forum. Download and read all the DT and POD manuals and you will learn what you need to know. Search this site too, these same questions have been asked and answered over and over and over and... Quote Link to comment Share on other sites More sharing options...
Metalchef Posted March 17, 2014 Share Posted March 17, 2014 Yes Topologies. 1. Blackface 2.plexi (I believe I have dt50 2x12 and 2 is P 75) 3. Vox ac30 top boost 4.treadplate. I hope that is what you were asking. Only difference in topology between dt50 and DT25 is topology 2. 1 Quote Link to comment Share on other sites More sharing options...
Goooner1 Posted March 17, 2014 Author Share Posted March 17, 2014 Thanks Metalchef, that's exactly what I was asking. Quote Link to comment Share on other sites More sharing options...
joebutterfield Posted March 17, 2014 Share Posted March 17, 2014 As a side note to this thread I would also check out the DT 2.0 update. This will allow you to swap out the preamp models and reverb types on each channel independantly if you you are using the amp stand alone via idevice and TouchOSC app. Link below http://line6.com/dtv2update/ @line6jbutter Quote Link to comment Share on other sites More sharing options...
MartinDorr Posted March 19, 2014 Share Posted March 19, 2014 Yes Topologies. 1. Blackface 2.plexi (I believe I have dt50 2x12 and 2 is P 75) 3. Vox ac30 top boost 4.treadplate. I hope that is what you were asking. Only difference in topology between dt50 and DT25 is topology 2. I thought the difference was in topology 1: BF Double versus Lux, but I may be wrong and it's a while since I tried this comparison. Just make sure to turn default Cab modeling on when you try to match what the DT does with an HD. Check the forums for posts on more details to sve yourself lots of time and frustration to get it close (unless you succeed on first try ;-). Martin Quote Link to comment Share on other sites More sharing options...
cuuhl Posted April 1, 2014 Share Posted April 1, 2014 As a side note to this thread I would also check out the DT 2.0 update. This will allow you to swap out the preamp models and reverb types on each channel independantly if you you are using the amp stand alone via idevice and TouchOSC app. Link below http://line6.com/dtv2update/ @line6jbutter So, I think I'm catching on: If I have a DT amp and a Pod HD, I can control all the settings via the Pod. If I don't have a Pod, then I can control via midi device. When updating, would I need to update both the amp and the Pod independently of each other? Thanks! Quote Link to comment Share on other sites More sharing options...
radatats Posted April 1, 2014 Share Posted April 1, 2014 don't confuse the standalone midi configuration capability with actual control like with the POD. You only get to select the amp, cab and mic, and topology. You cannot control the tone stack or volume this way. And they should be updated separately because they will each have their own separate firmware updates... Quote Link to comment Share on other sites More sharing options...
joebutterfield Posted April 2, 2014 Share Posted April 2, 2014 Sorry I am a little late to the thread, but I second the previous thread. You would have to update both the POD and DT independently. To keep updated with the Line 6 Product Specialist Team and the latest news regarding Line 6, please follow me on Twitter. @Line6jbutter Quote Link to comment Share on other sites More sharing options...
the_bees_knees22 Posted April 13, 2014 Share Posted April 13, 2014 Sooo, I came really close with getting the models mentioned above to match the original DT 2 models, although I use Brit 75 instead of of the Nrm. On the AC 30 however, the volume is really low coming from the pod compared to the other models. Is everyone having that issue? Or should I try re-updating the firmware? (it's almost half the volume of the other amp models)Perhaps I should ask this in the PODHD forums. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.