raiyanhrid17
-
Posts
21 -
Joined
-
Last visited
Everything posted by raiyanhrid17
-
using asio input 1/2 output 1/2
-
Reaper Yes via usb Yes my pod is up to date with latest fw and drivers. Note: my pc is a old crap
-
Having this really bad experience recording with the pod hd 500.My focusrite broke and sent it to the shop to get it fixed.Meanwhile for a basic riff part I used the pod and duhh the recording stucks in the middle for 2-3 seconds and continues again.Happened everytime I gave it a shot.Researched thoroughly about latency of this device or buffering and couldnt find a single info. If anyone can help me with this lemme know. \m/
-
After finishing the recording , if i turn off the pod device, then will I be able to hear through the sound box of my PC ? Like for mixing the tracks. This sort of sounds like a hack to me
-
@silverhead Left channel is WET Right channel is DRY In my DAW will I create 2 tracks and arm them for recording?Then Set track 1 for mono input 1 and track 2 for mono input 2? Will the end result will be a dry and wet track both for recording but also dry tracks in case I decide to reamp later? If this is wrong then guide me through the setup of your preset and will i turn the hardware monitoring off like @pipelineaudio1 said above? what should i do to get the playback of the recorded track through my headphones???
-
Everythiing is good the latency issue and the recording issue is solved But the output is only left what should i do to fix it?? And if i do a recording then there is no output through the asio config
-
Hey bro thanks for the patch man but how to toggle the dry/wet signal Not written in the description bro THanks @silverhead
-
@silverhead if i use a "new tone" preset there is no input in the reaper whatsoever .
-
Hey @pipelineaudio1 I managed to set up the asio buffer size at 128 And didnt get the fact from where do I set up my input of the signal being processed or unprocessed? In the inputs / recording it says these i dont see an option to choose in between processed and unprocessed sound. Guide me through it thanks bruvvs
-
@pipelineaudio1 I set up the audio device as asio but i didnt get any input whatsoever on the reaper On the other hand I set it up on directsound and i got input. i set up the presence and master through my pod hd 500 edit on the amp and set up the output levels.but the fact is I want to get a completely unprocessed dry signal without any horryfic latency.I am doing my research on processor unit recordings but i need some guidelines for it. Thanks man @pipelineaudio1 \m/
-
Are these settings correct ?? Let me know And one more thing , my friend uses a BOSS GT1 for recording stuff and he uses the directsound option on reaper. So if I use directsound with pod what might happen??
-
I saw your post man.But I need to know that if i set up the asio driver in the REAPER and select POD as digital audio interface,will i get a good playback or there will be some horrifying latency in the signal ? Thanks man @pipelineaudio1
-
Thanks for your feedback @pipelineaudio1 I just want to basically record the dry guitar tracks at home and later mix or master them using plugins like bias fx.If needed i might use the presets as well.But what should I do to track my guitar's signal and create a track using the hd500? TIA ^_^
-
Hey , I recently bought a Pod HD 500 and dont know much about it. I want to know the basics of recording through the pod hd 500 on reaper. Do I use the conventional high gain presets for recording or should I make new presets for recording?If i have to make a new one then how to? How to record the completely dry signal of the guitar to the reaper DAW? And how to lessen the latency and buffers? I just need a guideline for the basics of recording through it :D PS:I dont own any audio interface I just want to Record the guitars through my pod via USB Thanks in advance ^_^
-
Hey everyone the problem was a cable issue it is now fixed thank you everyone for your valueable time Peace ^_^
-
i changed the knob way back it was an external repair Could it be a usb cable problem???????
-
yes it was set as my audio interface in my pc and yeah the audio files work good
-
nope i am using all the updated softwares a,flash , firmware.the same problem persists when I use it on another PC
-
Yes i tried it with a different pc, the problem persists. All the other line 6 softwares work perfectly except the edit. The edit opens but doesn't response.if i press any switches on the pod , the change is seen in the edit so does the tap tempo changes if i set the tempo through the pod. I have done the procedure of global reset by holding the left arrow and plugging in the power cable. It didnt show anything that the pod has been Reset ,just the line 6 logo came up then the first preset came up.I also did the pedal calibration. The usb port seems fine.The pics are given below Thanks hurghanico Please tell me what to do next Best regards \m/
-
press the left arrow not the down ***
-
My pod hd 500 edit used to work just fine before. But i had to re install my windows for a certain hard drive crash, and after that my pod hd 500 is not responding.it works just fine without connecting the pod .But after connecting it ,the pod hd 500 edit is not responding or responding very late.I have tried it on different pc s but the problem persists.Asking for a solution Thanks in advance \m/