Search the Community
Showing results for tags 'controllers'.
Found 6 results
-
Tried searching, but new to the forum and couldn't find what I was looking for. I want to morph between two instances of the same reverb effect by controlling multiple parameters (decay, room size, mix, etc) but I can't figure out how or if it's possible. For example, suppose I want a 3s decay, 10m room size, and 20% mix at toe-down of an EXP pedal and infinite decay, 30m room size, and 70% mix at the toe-up position. Is this possible? EDIT: my bad, I figured it out almost immediately after posting this, and by accident. The lack of any sort of confirmation or "saving" makes it seem as if when changing the parameter with knob 1, you're only able to control one at a time. I didn't realize that the settings I made for one parameter were remembered if I switched to a new parameter. For anybody coming here from a web search, simply set a given parameter with which ever controller and values you want, then using knob 1, switch to a new parameter and repeat, for as many parameters as desired. In the future, I hope the UI has some sort of feedback mechanism for when the user makes changes like this because right now it feels like things don't "save" when you fiddle with parameters unless you go and actually use the save function for the entire preset.
-
I would love if the HX Stomp got the same possibilities as Eventide H9 and some Digitech processors (using fs3x), where you can connect three controllers through the stereo out utilizing tip, ring and tip/ring combined for a third pedal/expression. Will that ever happen on any HX firmware update?
-
Here's some of the most popular HX Effects tutorial video we have. For more and other products, check out our YouTube page https://www.youtube.com/user/Line6Support 3 Minute Overview Updating Firmware Assigning Controllers Pedal Edit Mode Signal Flow
-
I notice the rack has 3 of these plus an input for a pedal switch as well. Then you add on the control it has another 3 inputs. Is this then giving me the ability to use these as controllers. Also I have some old Roland dual switch controllers are these inputs able to be used to act with switches like an fs6 or fs7?
- 8 replies
-
- 1
-
-
- pedals
- controllers
- (and 1 more)
-
Hi, I love my M13 but hated the process "turn on wah > move leg to exp > wah > move leg to M13 > turn off wah", cause there is "lot of time" and it's not good for playing :-) So I decided to contact small company which made MIDI devices and the result of this is Expressione by Microdesignum - upgraded cheap exp Bespeco VM12L with MIDI switch on toe, which sending MIDI command to switch on/off one of effects (it's programmable, so I can chose which position of M13 will be controlled). See how it's work Some photos: https://drive.google.com/folderview?id=0ByRXrCr9vDscbmhjdnRia21lVGM&usp=sharing More info (in czech, use Google Translator :-)): http://www.svetkytar.cz/line6-m13-kvakadlo
-
Hi all, I just made the switch from the TC G System to the HD500X. I'm busily downloading tones and trying to come up with some good tones that I can use in a worship setting. I play in a church that seats about 1,100. My plan is to run my Les Paul studio deluxe into the POD then direct out mono to the board. (Until I maybe get a James Tyler Variax....) My question: I am experimenting with using a pedal plugged into the "pedal 2" jack. I'm using the same pedal that I used with the G System, a Boss FV-500H, which seems to work great. The G System allowed me to turn on effects simply by using the pedal. For example, if I have the pedal assigned to a wah, I can just start sweeping the pedal and the wah would activate. If I stopped moving it for an assignable amount of time (1 sec, 2 sec immediately, etc) the wah would turn off. If I have to assign the wah to a switch then go over to pedal 2, then I will probably just use the pedal on the board with the toe switch. Where this really becomes a problem is when I'm using #2 to change delay feedback or verb decay, then use the toe switch to go back to the volume, my effect will stay at its highest point. Any and all suggestions are welcome. Thanks Dave
