spikey Posted April 13, 2016 Share Posted April 13, 2016 I took off a couple of hours early, couldn't stand it any longer lol. Helix rack software installed without a hitch. Im using a late 2009 iMac 27", and a 15' USB cable. The editor did had 3 or 4 time-outs in around 5 hours time, but restarting it fixed that issue. Ive only set up (readjusted from the factory settings) 3 patches and saved them. My biggest time issue was setting the wah up like I wanted it. You can get yourself in a real mess if you are not careful, and it takes a bit to work your way back (thanks GOD for the editor in this respect), but after a while I figured out a few things and it does sound real good now. Over all the tones on the 1st 3 or 4 patches are just killer sounding to me thru the monitor inputs on the Firehawk 1500! 1 Quote Link to comment Share on other sites More sharing options...
roscoe5 Posted April 13, 2016 Share Posted April 13, 2016 Glad to hear it man! I've enjoyed your posts, even without a Helix in hand. Quote Link to comment Share on other sites More sharing options...
Lachdanan0121 Posted April 13, 2016 Share Posted April 13, 2016 Ohh I am so excited. I will be ordering my Helix Rack before too long! :D Quote Link to comment Share on other sites More sharing options...
MelThorpe Posted April 13, 2016 Share Posted April 13, 2016 What kind of mess did you get into with the Wah? I found it to be pretty straight forward to modify the settings, then I just press the knobs in to set them to the default value if I mess it up. Quote Link to comment Share on other sites More sharing options...
aepoc Posted April 13, 2016 Share Posted April 13, 2016 ..... after a while I figured out a few things and it does sound real good now. I'm curious what you did to the wah to get it to where you want it :) Quote Link to comment Share on other sites More sharing options...
fabbr Posted April 13, 2016 Share Posted April 13, 2016 send us some pics :) Quote Link to comment Share on other sites More sharing options...
spikey Posted April 13, 2016 Author Share Posted April 13, 2016 OK will try and do that... Quote Link to comment Share on other sites More sharing options...
glideman Posted April 13, 2016 Share Posted April 13, 2016 Oooooohhhh. Would be much appreciated! :) Quote Link to comment Share on other sites More sharing options...
spikey Posted April 14, 2016 Author Share Posted April 14, 2016 My Wah Settings using the Mission Helix Pedal with toe switch... Hope this helps! :) Neat thing is I really don't need "Heel down Wah off" now, because at heel down the tone reverts back to the original settings, until I rock it forward again. At least to my ears its very close to the same. Im sure there will be further tweaks but you get the templates of what I started with. Notice that I have not set anything (CC wise or anything else) for EXP-1 in Command Center. I wonder- Is this why that at heel down it reverts back to wah off when the toe switch is still toggled on??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.