stugatzo Posted November 6, 2018 Share Posted November 6, 2018 The cap/top of the model selector knob on my JTV-59 has popped off. Not the whole knob/dial, just the very top which is like a cap. It functions fine. I have lost this cap. Anyone know of a source for replacement knobs for this guitar? Thanks! Quote Link to comment Share on other sites More sharing options...
jerseyboy Posted November 7, 2018 Share Posted November 7, 2018 This happened to me recently while pulling JTV59 from gig bag the “tuning” control knob cap popped off. Luckily didn’t lose it and I reattached with carefully placed cryo glue. It appeared there wasn’t much glue on it in the 1st place. But a while back, as some folks have done, added a small chunk of rubber inside/under the knob cap to better plunge the shaft of the Model A-B (white-blue) switch. Obviously, that mod/fix can force/push this plastic cap into oblivion. Anybody who’s done that mod to their 59 should keep an eye on this area. Don’t lose the cap! I dunno where to find the exact part. Open a ticket I guess? Gotta be around someplace but Line6…. Quote Link to comment Share on other sites More sharing options...
Belew01 Posted November 8, 2018 Share Posted November 8, 2018 https://shop.line6.com/parts/guitars/jtv-59-knob-kit.html Quote Link to comment Share on other sites More sharing options...
stugatzo Posted November 9, 2018 Author Share Posted November 9, 2018 Thanks for the tips! @Belew01 that link is dead :-( Quote Link to comment Share on other sites More sharing options...
psarkissian Posted November 9, 2018 Share Posted November 9, 2018 The fires in Thousand Oaks and Malibu (Calabasas is in the middle), so everything is shut down there today. Right now I'm Wifi at a nearby coffee shop. Try again tomorrow of Monday. Or on Monday, check with Customer Support. Quote Link to comment Share on other sites More sharing options...
cbrillow Posted November 12, 2018 Share Posted November 12, 2018 Best of luck, psarkassian, and to all of your cohorts at Line 6. Hope you all come away with no damage and injury! 1 Quote Link to comment Share on other sites More sharing options...
jerseyboy Posted November 13, 2018 Share Posted November 13, 2018 Same here, best wishes to Line6 folks and ALL embedded nearby these tragic events. Upping our donations to American Red Cross and urge everyone who can to support legit non-profits dedicated to assistance for people devastated by these hard times. OP, you've looked carefully inside your gig bag for this knob top? Mine popped off taking it outta the bag. So lucky I found it and saved $35 + sh. Good luck... Quote Link to comment Share on other sites More sharing options...
psarkissian Posted November 14, 2018 Share Posted November 14, 2018 We're back. Got to the edge of the parking lot. No damage to the building. Quote Link to comment Share on other sites More sharing options...
silverhead Posted November 14, 2018 Share Posted November 14, 2018 Good news. Glad to hear that there's no damage to the building. Hope everyone is safe. Quote Link to comment Share on other sites More sharing options...
psarkissian Posted November 14, 2018 Share Posted November 14, 2018 Yeah, all safe and sound. Quote Link to comment Share on other sites More sharing options...
davidb7170 Posted November 16, 2018 Share Posted November 16, 2018 If you're in the US, and just want the single knob take a look at https://www.fullcompass.com/prod/258330-line-6-50-03-0074-3-jtv-59p-model-knob - is says for 59P, but is not that specific. I bought one of these for my 59 and also the one for my 69S, just to have on hand, in case.... Dave 1 Quote Link to comment Share on other sites More sharing options...
psarkissian Posted November 16, 2018 Share Posted November 16, 2018 Correct,... that knob is for both the 59/59P series, Asian and US versions. Quote Link to comment Share on other sites More sharing options...
stugatzo Posted November 17, 2018 Author Share Posted November 17, 2018 Glad to hear all are safe at L6HQ! I have ordered the part through Full Compass. Thanks for all the advice and tips! Quote Link to comment Share on other sites More sharing options...
psarkissian Posted November 19, 2018 Share Posted November 19, 2018 Thanks, no problem. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.