ingen63 Posted October 7, 2020 Share Posted October 7, 2020 I have to set the input gain at my DAW to ~-.30DB to not overdrive the channel with line 6 USB. Here is my setup I set my gain to utilize the full range by adjusting the output level up to +15db depending on the preset as I want to get the full power of my FRFR speakers. The output meter shows always green and also by ear there is no digital overdrive/clipping. Checked by monitor speakers and headphone. But if I am using the same settings to record directly into my DAW (Cakewalk by Bandlab, Global output settings toLine), I have to set the input gain down to -30 db, to not overdrive the input ( stay below 0db) Is this normal? Quote Link to comment Share on other sites More sharing options...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.