Leaderboard

Hi So, I have updated my cheat sheet (pdf-version) and for you who are interested just download it from the link below (from my Dropbox). All the new amp’s, cab’s and effects are in there, marked with a red “N”, incl DSP and some other additional info. Legacy devices are marked with a red “L”. All are sorted in order of appearance on the unit, in their respective group. DSP-values for the new products are from me, but I have used the same method as Ben Vesco has used, published, and described very well on his great site (unfortunately not updated). If anyone has found a value that differs from mine, please let me know. There is a slight difference depending on which blocks are used when trying out the numbers. I have used blocks from Ben’s “reference material” to minimize errors and to get continuity. I have used two different setups and if those have a variation bigger than 0,5 (in relative %) I have used a third setup. Think it’s hard to get any closer. “Last device” is always at least one volume pedal at the end, in mono (0,47%) and/or in stereo (0,61%), what’s ever slips in :-), so that would be the tolerance... All devices are in preamp/full amp (cab’s are not incl, presented separate, but as default cab’s incl DSP, are in the sheet with the amp’s), stereo/mono, single/dual etc. where applicable. In an earlier version I did also publish the cheat sheet in a MS Excel 365 format, a DSP calculator. I will make that update but need some more time to finish it (want to play some guitar too…). Download the cheat sheet from my Dropbox (pdf-format) – https://www.dropbox.com/scl/fi/8vsyuiehgd6ofjryw6g9q/Line6-Helix-Model-and-DSP-Summary-3-70.pdf?rlkey=k3yyscizqbi1z80ozmo6gsihi&dl=0 https://www.dropbox.com/scl/fi/3ye2g1okvx18ypsww746w/Line6-Helix-Model-and-DSP-Summary-3.80.pdf?rlkey=8ygh0iqax8ewds0i3yn0nxc86&dl=0 Great update Line6, very impressive work. Thought I had all I needed before this update, but was I wrong, there were a few more I didn’t know about, eg. the US Dripman (!), some of the Catalyst amp’s, 2203 and the ODR-1, wow :-) Have fun (I will…)! //Per

I assume that by ‘aggregate’ you mean the ability to use both devices simultaneously as the audio input and/or output devices. If so I’m pretty sure (less than 100% confidence) the answer is HX Stomp, as an audio interface for recording purposes, uses the ASIO protocol which requires that the same audio device, and only that device, be used as both input and output device. Hence it won’t work with the Scarlett. This limitation is imposed by the ASIO protocol and the HX Stomp is fully compliant with it. You mention that Asio4All doesn’t work. I’m not surprised. It seems to work for some people in some PC configurations but generally it is known to cause problems with Line 6 devices. That’s because Asio4All is not fully compliant with the ASIO protocol, part.y because it attempts to contravene the protocol by supporting more than one device. Whether or not you consider this ‘firm information’ is up to you I guess. As I said, not 100% certain because I’ve heard reports of asio4all working for some. If it’s not working for you now I don’t think you will get it working.

Save the preset with the effect OFF.

Check you USB settings on the laptop. The default is that the OS tries to save power by switching off USB ports that it thinks aren't being used, especially when running on the battery.

I have the same issue and it’s extremely frustrating. I cannot run HX one librarian, Line 6, Central and when I run the Line 6 updater it is just a blank page with nothing shown. I am signed in and I have tried everything that Line 6 has offered and others have offered With no luck. I’m running Windows 11 and I have been over the owners manual more times than I can count. Is there a mode that you have to put the pedal in? If so, I cannot find that out. I have also watched a few of the YouTube videos on updating but if you can’t load the app, the videos are useless. I have tried different ways to remedy the problem and I have tried the same fixes over and over. One of the suggestions is to write click then go to properties then to compatibility and uncheck run this program as an administrator. The trouble is, it’s not checked in the first place. So I have tried to check it close it try the app but still the same horrible results. If only Line 6 would pay attention to this problem because I see others have the same issue. I have also tried to do the same in the root with no luck. Kind of makes me want to throw this thing out a window. Please help.