Leaderboard

Hi, Your Rack has the identical processing power as my Helix floor - plus lots of options for multi path signals. BTW it’s not just 2 signal paths, but actually 4 each with it’s own input, and each of those four paths are full stereo. How about this scenario - acoustic guitar and electric bass, along with a vocal on a mic input path, plus a synth/keyboard/drum machine on the return inputs. First time you need an extra signal path, you won’t regret having them there. Hope this helps/makes sense.

You can go from input to path A to path B to output, which gives you double processing power, which means double as much FX blocks.

For vocals and guitar simultaneously, for one reason. There are many others.

The first problem I see with this is that you're re-amping a track that was recorded off of your guitar amp's speaker. That's NOT actually a DI Track. You COULD use the HXS to add POST effects, such as would be done in a studio, but you're MUCH better off using some of the many plugins available to you either IN LOGIC or on the aftermarket. Your problem is that both your VOLT and HXS have very minimal I/O and you don't own HELIX NATIVE. If you bought your HXS NEW you might consider using your discount to buy NATIVE, which would allow you to do the re-amping completely within LOGIC and not have the hassle of re-amping through the HXS itself. But if you can't do that: I assume that you're using a MAC. Create an AGREGATE DEVICE: Create an Aggregate Device to combine multiple audio devices - Apple Support I am NOT a MAC person, but my understanding is that this will allow you to use all of the available I/O of both your VOLT and HXS at the same time. You should now be able to figure out the necessary routing to accomplish recording your mic'd amp (BLANK HXS preset with LEFT MAIN OUT>Volt Input 1) alongside a true DI track (HXS RIGHT MAIN OUT>Volt Input 2) and monitor the recorded project mix through the VOLT while re-amping the DI Track through the HXS. Hopefully, someone else who is actually a MAC person will chime in here to verify this method or have a better solution. Good Luck!

hello. i'm from Sri Lanka.i got a line 6 tone port ux1 audio interface.then i tried to connect to my MacBook Air (M1 chip).but their drivers are not supporting in to my laptop.so i just wanna help from you for the connect this one as soon as possible and please give me some guidence to make it worthy for me. thank you.