rudomat

thanks...but it seems this link doesn´t work....can you tell me what it says...? thanks a lot!

really...? great...didn´t get that...thanks!!!

the video above was made accessible to the public by line6 insiders...;-)

when i´m on one snapshot, i want to change between two delay settings A and B within this snapshot...just toggle between A and B with one footswitch....

two fx states A and B per preset is great....really great would be, if it were per snapshot...;-)

about 4 months ago some insiders anounced that polyphonic fx might come to hx fx...any news about that....? the really poor tuner f.e. would need that badly...

only having the possibility to set start and end point is way tooo little!!! please give us at least a middle point option...(or better a little more...like the axe fx does, fe...) you cannot really have subtile control over the full xpression pedal range with only those 2 parameters... i´m using the original line6 pedal and it´s not possible to have a smooth volume control over the full pedal range...that makes subtile changes impossible!! that is reaaallly important!!!

ok...i´ve not copied so many, but i have run into it...

still after upgrading the unit, copiing presets is not really fully working...wah on/off-settings f.e. and controller settings are wrong after copiing...;-(

no...they´re not old presets...

as i said, i also lose these snapshot information when copiing presets...and i also lost snapshot custom names...that is a software bug for shure...!!! and my suspect is, it´s while copiing...

thank you...exactly what i tried to say...

sorry, phil...i´m not native english speaking...when i change the settings for minimum and maximum for my expression pedal i don´t hear the new setting....i first have to move the pedal to get to hear the new setting...understand...? thanks

wow....very funny people you are...very funny...maybe you should try another forum...?

no...i´ve set them to global...

that really drives me crazy, that i always have to move the xpression pedal first while searching for the right parameter, to hear the changes... of course it should be possible to hear the changes in real time and not have to move the pedal first to be able to hear the changed parameters...

am i the only one who´s losing controller data when copiing presets or blocks....? it changes f.e. from controller:snapshot to controller midi cc#4 ...or it simply lost controller info... i´ve also lost the custom names of snapshots...my suspect is, it´s due to copiing block that contain controller data...

phil...can you tell me one more: since the helix rack has got 3 or 4 expression outputs and the floor control as well has got 3 or so...i guess it´s not possible to use the ones in the rack for amp switching and the others from the floor control for expression pedals at the same time....is it...? or can you either use the rack ones or the ones on the floor control....? thanks....is there actually a forum, where we can lodge wishes for the future (like the fractal forum has... ;-))

wouldn´t that be a nice upgrade...? to get a little more influence on the expression curve...like the fractal units have...a parameter for the middle of the curve etc... another question: is there a way to get rid of FS3 showing "learn" and go back to the block infos...??? and one more...can anyone tell me if helix rack can have more than 9 blocks in one preset...? thanks

question: is there anything that the hx fx can do, that a helix or a helix rack can´t do...? thanks!

sorry my stupid question...but what do you mean by "gain block"...? thanks

hi, i´m running my hx fx in 4CM, using my expression pedal to toggle between a rhythm sound in heel down position (less gain, very little delay, etc...) and a lead sound in toe down position (level boost, much delay, etc...) now for my higher gain sounds i´m searching for a solution to be able to add a gain boost as well for the toe down position...but i guess there´s no boost or distortion pedal that offers a mix parameter, so i could set it to 0% in heel down position, is there...? is there a way to bypass a block with an expression pedal in one position...? thanks for ideas!! ;-)

why can´t i find such info in the manual...??? so i have similar strange behavior with the volume block...? actually what i´ve seen is this: first i thought why not just change the exp1 for volume instead of wah and exp2 for wah instead of volume...i simply changed those parameters, but found that it didn´t work at first....after some hours of trial and error, i´ve had it all work fine...then i read some info and thought maybe it´s better to have it like it´s originally meant to be...so i again changed settings for exp1 to control wah again and exp2 for volume...and now it doesn´t work again...the wah actually works now, but exp2 does things like switching off the vol block in the middle of the pedal range...??? or it controls the vol from 100% down to nearly zero and then when it should be zero it jumps to pretty loud level again....??? or it controls level plus the wah at once...allthough the wah is set for exp1 again.... no idea, why it does such things... anybody has had similar problems...? any idea...????

ok....seems it´s been my old pc...on my new win10 tablet it worked fine...

hi´ve got my unit with fw 2.41 on it....installed drivers to my win10 pc, then downloaded updater and hx edit...updater said to do it with hx edit...that doesn´t recognise the connection...updater failed...now the unit says bbot error after turning it on....it says to power off, hold > while power on...etc.. .but it doesn´t work any way.... any hints...? thanks