Leaderboard

The way I handle this is I have each song as a different preset, so the song/preset is in a predictable state. Therefore I select the song which loads the preset in it's default saved state, and then start the song via the MIDI controller that starts the playback of my performance system (tracks and MIDI), the MIDI sequences are always in sync.

It appears that if a block is OFF, and you send it's FS CC with a Value of 0 (OFF), it toggles to ON and vice versa. If you assign a MIDI CC to a block's BYPASS and use the BYPASS CC instead of the FS CC this does not happen. This solution is less than ideal since it requires you to assign a BYPASS CC to each block but it works. You might want to report this as a bug to L6 support.

Not mentioned in the release notes, but the Glitch Delay effect has been updated on par with Helix 3.1 with the two pitch intervals ... Thanks for this good surprise !!

Hi. Firstly, a change in the JSON Patch script change is not a hack. This has nothing whatsoever to do with the firmware and it cannot in any way damage Pod Go. The worst that can happen is you might get some odd behaviour in the modified patch. Provided you don't try changing/ removing the amp, cab and EQ blocks the modified patch should work just fine. If these blocks are modified the patch may act quirky.

No, the VDI connector is only for connecting, controlling and powering Variax guitars, nothing else Yes, it is possible to connect the POD's S/PDIF to an audio interface equipped with a digital input Yes, the POD HD500X and POD HD Pro X are both equipped with 2 paths A and B, and for each of them it is possible to select a different input _______________________________________________________________________________________________________________________________________________________________________ All about POD HD500/X help and useful tips

The courtesy outlet on the PP2+ can power the POD Go, but the actual 9V jacks don’t have enough capacity, even if they’re all combined. The PP2+ is kind of an outdated power supply at this point. Many of the newer bricks out there can power the PG.