Leaderboard

At our rehearsal room, I use a Fender Blues Deville that lives there for monitoring purposes. I plug my Helix Stadium XLw/o IR in the path, into the the power amp in. Unfortunately, if I use a standard TS cable, I get a loud ground hum. Using a Fractal Humbuster cable, the hum goes away. Give this a try, if you are experiencing a similar issue.

Hi Thanks for the link All worked out great Just had to adjust the USB trim 1&2 to the required level … Thanks again

This is a comprehensive set of new feature requests. The official way to submit such requests is here: https://line6.com/company/contact/productfeedback/ What I don’t understand is why you request these features in the context of so-called ‘worship’ music. Would they not be helpful in any other context? Perhaps I am a member of a Satanic Worship, or Death Metal, cult. I could use those features too. Why the exclusive approach? A cult is a cult, under any name.

Hi See the section of the Helix Owner’s Manual regarding USB Audio on page 73. Your playback from the iPad and the Camera Connection Kit is via USB 1&2 through the Helix “Multi IN”, additional controls can be found on page 68, Global Settings In/Out - USB1&2 Destination, and USB1&2 Trim. https://line6.com/data/6/0a00051afda2673ccc1cc8e68/application/pdf/Helix 3.80 Owner's Manual - English .pdf Hope this helps/makes sense.

AFAIK, Line 6 don't monitor this forum - you need to send a Feature Request https://line6.com/company/contact/productfeedback/

You could put a Gain block at the beginning of the chain and then add a Stomp button to toggle it on and off. Set the level of the Gain block to whatever boost is needed to bring it to the level of your high output guitar. You can even name the Stomp button to be "Strat" (or whatever name is appropriate). Save the Gain block with the settings and then its easy to plant the same block into new presets.

Okay - figured it out. Needed to make sure that midi clock was turned "On" in the TimeLine parameters and that the Stadium was set to send midi clock. Works quite nicely!

The course is completely free!

The way I read it, some CCs are RESERVED for GLOBAL FUNCTIONS. These are called when CCs are sent on MIDI Channel 1. Use MIDI Channel 2 for USER ASSIGNED CCs.