MusicGeek

Thanks Soundog. I'm working in another video covering aspects that I think could interest to non first time user.

Hi. For those who are interested in what is Helix Native and how to use it, here I have made this tutorial. Spanish, with English subs

Updated again, thanks guys :-) . In case of doubt, I've counted the number of votes that each proposal has had

Thanks, Trintanmatthew, I've updated the list.

You are not alone with that problem

Snapshots:

Thanks Andy :)

Hi. I've just purchased a Relay G30. First impression it's great: large signal coverage, clean sound, and no latency. I have a question: has the G30 an auto power off feature when no in use? Must I switch the unit off manually always?

I think that each G10 search an available channel when power on, each one independent from the other. So several G10 can work together

I think that Helix driver crashed yesterday my mac with a kernel panic :-( Sun Aug 28 12:41:49 2016 *** Panic Report *** panic(cpu 0 caller 0xffffff80093ce6fa): Kernel trap at 0xffffff7f8bf9181d, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0x0000000000000040, CR3: 0x000000000c6d4000, CR4: 0x0000000000002660 RAX: 0x0000000000000000, RBX: 0xffffff91a60dd000, RCX: 0xffffff7f8a728d88, RDX: 0x0000000000001100 RSP: 0xffffff81821d3f40, RBP: 0xffffff81821d3f40, RSI: 0x0000000000000000, RDI: 0xffffff8026101528 R8: 0x0000000000079749, R9: 0xffffff8159c6f068, R10: 0x0000000000000000, R11: 0x00001e2a5e3c490e R12: 0x0000000001f97e42, R13: 0xf8ffa7cbca1b00f1, R14: 0x00001e2a5e3c5050, R15: 0x00000000018be7af RFL: 0x0000000000010286, RIP: 0xffffff7f8bf9181d, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0x0000000000000040, Error code: 0x0000000000000000, Fault CPU: 0x0, PL: 0 Backtrace (CPU 0), Frame : Return Address 0xffffff81821d3bd0 : 0xffffff80092dab52 0xffffff81821d3c50 : 0xffffff80093ce6fa 0xffffff81821d3e30 : 0xffffff80093ec563 0xffffff81821d3e50 : 0xffffff7f8bf9181d 0xffffff81821d3f40 : 0xffffff7f8bf8d761 0xffffff81821d3f90 : 0xffffff7f8bf88067 0xffffff81821d3fb0 : 0xffffff80093c9117 Kernel Extensions in backtrace: com.line6.driver.helix(1.0)[83456A14-B65E-3628-9819-257876D91F89]@0xffffff7f8bf87000->0xffffff7f8bf9dfff dependency: com.apple.iokit.IOAudioFamily(204.4)[16D694E8-A341-3DAC-A710-57BC95EF7758]@0xffffff7f89acb000 dependency: com.apple.iokit.IOUSBFamily(900.4.1)[FB980EB5-1F73-348E-9554-6F9F6FE481FD]@0xffffff7f89c5d000 BSD process name corresponding to current thread: kernel_task Mac OS version: 15G31

I tried the eq block also with my headphones, and I think that the sound now is more "natural", not so plain. Great!!

thanks :)

I first played a patch through a mixer console, and adjusted the patch level to be correct. Then, I used that patch at home, connected to my daw, and I measured the level. That was the reference for the other presets to adjust.

Thanks for the advice

Thanks again Siwatts69

Thanks, SiWatts69, great explanation So, if there is sound, then the cable works. If the cable has impedance problems, then it doesn't sound at all, doesn't it?

Hi. Recently I've connected Helix into a L2T through Line 6 Link with a XLR cable. It seems that it worked, but I have a question: what is the problem using inadequate xlr cables, total lost of the connection or less sound quality? If there is a lost of the link, it's easily identifiable, but if the problem is degradation of the quality of the sound, then you may be think wrongly that it works well

Something similar has hapenned to me since last update. After press a switch that change several parameters in an amp (drive+volume), the drive change to max=10 and min=0 itself :-( I have not be able to recreate this behaviour to report it.

Same problem here. Playing gig at outdoor, lcd is not visible, and switch lights also difficult to see. Could I increase the bright of the switch lights?

Updated, thank you :)

Mine has crashed a couple of times, and both times I was editing a lot of things with the computer editor :-)

I understand your point of view, DI, and I appreciate your explanation. But what I think is that it is not an exclusive choice. I'm not thinking on replacing helix control with another third party controller (in fact, I have a no rack unit) One of the pillars of the helix concept is the control unit and its interface (great job!). What I am thinking is about expanding capabilities of Helix. People who have helix rack&control, or the floor unit, they may also want to be able to control the unit with a midi sequencer, or with their daw. It's just that :-)

sadly, it seems that this decision is simply taken for Line 6 to earn more money :-(

Or a "rotative state" switch: state 1, 2, 3, 4, 1, 2, 4, 1,....

Hi, jaminjimlp. Do you know if FCB1010 works with Helix?