Please ensure Javascript is enabled for purposes of website accessibility Jump to content
Line 6 Community
Welcome to the Line 6 forums!
Apply to Join our Public Beta Testing Program!
Limited Support of Legacy Products
New Forum For Discussing Tones

Triryche

Line 6 Expert
 View Profile  See their activity

  • Posts

    4,238

  • Joined

  • Last visited

  • Days Won

    15

 Content Type 

Everything posted by Triryche

  1. Triryche
    I’m not sure if the trial version functions differently. When you use the trial do you need to select your UR22 in PF? If so anything you do in PF standalone should be available from the UR22 ASIO. Does the trial version include the plug-in?
  2. Triryche
    I'm guessing your speakers are connected to the UR22? You could connect the UR22 headphone out to your PC line in. If you want stereo you will need a TRS connection on both ends of the cable and if you use a 1/4" to 1/8" adopter it will need to be the TRS version. Here's an example of 1/4" to 1/8' cable with no need for an adopter. https://www.amazon.com/TISINO-Stereo-Cable-Nylon-Interconnect/dp/B083R58TLJ Or you could run the UR22 L/R outs to the PC line in with a cable like this, but if your speakers are connected to the UR22 swapping cables back and forth gets annoying. https://www.amazon.com/TISINO-Stereo-Y-Splitter-Cable-Breakout/dp/B083R59ZNL
  3. Triryche
    Did you purchase a hardware independent version of PF2? What are you recording with?
  4. Triryche
    Assuming you have a UX1 or UX2, a workaround would be to plug your mic into the Line6 interface and the line out(s) or headphone out to the UR22.
  5. Triryche
    What are you connecting your mic to?
  6. Triryche
    Have you tried reflashing it?
  7. Triryche
    You can use PF 1 for free, that's what replaced Gearbox.
  8. Triryche
    Yes, he can download PF and it will work as long as the UX is connected. It might even work with PF2 but I'm not sure. You are still able to use the plug-in because you purchased the upgrade.
  9. Triryche
    Have you installed the latest driver?
  10. Triryche
    He does not need to purchase PF, the Toneport has a free hardware enabled license. Did you at some point pay for PF2?
  11. Triryche
    The Tonepoort had a hardware enabled license tied to it. So your friend will just need to download PF . No, not unless you purchase a hardware independent license. BTW, do you have PF or PF 2?
  12. Triryche
    Try adjusting your buffer size.
  13. Triryche
    Are you selecting Mic in POD Farm?
  14. Triryche
    FYI... A USB mic won't interface with the UX2.
  15. Triryche
    Are you selecting Mic in POD Farm?
  16. Triryche
    Glad you got it sorted!!
  17. Triryche
    I always found Cubase a bit clunky and a bit weird that hardware devices are setup under VST. Reaper is what I use and find it a lot more intuitive. It's only $60 and has a fully function free trial.
  18. Triryche
    Looks like Send 3 & 4 are not Inactive in Cubase. I haven't used Cubes in over a decade but I think you may need to go into VST Connections in devices or something. As for hearing the dry with the wet, is only when you are recording? If so you might have track monitoring turned on.
  19. Triryche
    Congrats on the baby boy!! In the first screenshot I have Sends 1 and 2 set to dry and Sends 3 and 4 to Tone A+B. In your DAW arm a track to receive Line6 ASIO Inputs 1 & 2 and another track to receive 3 & 4 (or visa versa). Depending on what you are doing you are likely fine capturing only Send 1 for a mono dry track and 3 & 4 for a stereo wet track. I capture both by default due to some of the plug-ins I use. Depending on your DAW you may need to explicitly enable all 4 Inputs from the UX2. The dry track is what you can send to your friends, and add plug-ins. The wet track I use to remember what tone I was going for when I revisit the project. No matter what plug-ins you add to the dry track you can always turn of the the plug-ins for the original dry track (unless you bounce it with plug-ins rendered and delete the original). Hope this helps, feel free to ask more questions. Here is screenshot if you only have one tone path.
  20. Triryche
    I will try to post some screenshots this evening. Yes, this is to use the standalone to capture wet and dry to your DAW. Then render the dry to the format of your choice to send off. You can then apply the add PF or other plug-ins to the dry.
  21. Triryche
    Have you had a chance to try the setup I mention in my previous post yet? It works out nice because after you record you can add the plug-in to the dry track and should have no latency and then you can render the dry track with the plug-in off as fflbrgst mentions.
  22. Triryche
    Castro66, just for clarification, are you launching PF standalone, plug-in, or both?
  23. Triryche
    Is the UX2 a Toneport or POD Studio?
  24. Triryche
    Navigate to Downloads at the top of the page and select the appropriate filters from the drop downs.
  25. Triryche
    Assuming you have a UX POD Studio or Toneport. The UX has up to 4 sends that can be configured in PF standalone mixer view or the Line6 Audio-MIDI control panel. One workflow I typically use with the UX is to record a dry stereo track and a wet stereo track simultaneously. Then insert the PF plug-in on the dry track with the wet track serving as a reference for the tone I was going for.
×
×
  • Create New...