tyler1337 Posted June 8, 2019 Share Posted June 8, 2019 I have tried many things to solve this problem but I can't figure it out and I need your help. I'm not too knowledgeable with audio equipment because I have only just started using the UX2 and my At2035 for streaming on twitch. Everything was working just fine up until I restarted my pc. I know my XLR microphone works, all of my drivers are up to date, I have unplugged everything and re-plugged. I found that if I unplugged my Microphone there is a terrible noise still coming from the ux2 somehow? so, it couldn't be my microphone that is the problem I'm assuming? If anyone could help me out I would be very grateful, thanks! Quote Link to comment Share on other sites More sharing options...
Gaz_Ham Posted June 9, 2019 Share Posted June 9, 2019 Do you have another mic you could try? That would eliminate it as a possibility. Perhaps give the troubleshoot guide a go. It's always solved any problems I've had. Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted June 10, 2019 Share Posted June 10, 2019 That input looks like its 'pegged' at full volume, as if there was a feedback loop or a short circuit. Quote Link to comment Share on other sites More sharing options...
Triryche Posted June 10, 2019 Share Posted June 10, 2019 How are you monitoring the UX2? Quote Link to comment Share on other sites More sharing options...
Guest Posted July 16, 2019 Share Posted July 16, 2019 i have the same issue with the same mic and setup and along with this it happens when i open OBS Audacity and Discord ONLY and I get Blue Screen Crashes. Windows 10 Broke Line6 devices i swear Quote Link to comment Share on other sites More sharing options...
LinHui Posted August 24, 2019 Share Posted August 24, 2019 When I use POD Farm 2.5 on Windows 10, I often have a blue screen. Quote Link to comment Share on other sites More sharing options...
LinHui Posted October 11, 2019 Share Posted October 11, 2019 The reason for my blue screen and microphone noise has been found, which is caused by the short-circuiting of the condenser channels, so I replaced them and the problem was solved perfectly. Quote Link to comment Share on other sites More sharing options...
Phazedwtfux Posted November 24, 2019 Share Posted November 24, 2019 after switching to windows 10 my microphone still makes a very loud buzz/ring/static sound even if i unplug my microphone from the ux2. did you find a fix to this? Quote Link to comment Share on other sites More sharing options...
tyler1337 Posted January 27, 2020 Author Share Posted January 27, 2020 still having problems with this.... when i get home i'm going to try more troubleshooting to get it to work ..... really considering selling the UX2 for another usb interface.. Quote Link to comment Share on other sites More sharing options...
kheramon Posted February 10, 2020 Share Posted February 10, 2020 Also having this problem... Quote Link to comment Share on other sites More sharing options...
mrvlhs Posted January 7, 2022 Share Posted January 7, 2022 On 10/11/2019 at 9:05 AM, LinHui said: The reason for my blue screen and microphone noise has been found, which is caused by the short-circuiting of the condenser channels, so I replaced them and the problem was solved perfectly. @LinHui How did you fix this? @tyler1337 Have you found a solution? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.