pratikb

Thanks Brian

Thanks a lot Joel_brown, I know you only play Heavy Metal :)

Hello Everyone, As per the thread( below is the link), if possible please upload/attach your patches that will help a newbie like me and may be others to understand the Effect placement, Amps, Drive Parameters http://line6.com/support/topic/5441-favorite-hd-models/ Thanks in advance, Pratik

so is your chain as follow: Guitar>>gate>>ZW Cry Baby Wah>>Pod 1/4 or XLR out>>>EQ>>AMP I am confused

hey Michael, were you able to do it?

Other way to do it is to assign the Wah to the Footswitch. Pratik

i use the Crybaby DB-01 :) Awesome

Sorry to hear that, but does it happen with all the patches? if not, then may be the patch is corrupt

Traynor YCV50B

:o Not done Line6.

So we can have different Output for setlists ?

As a general rule, Where should the following EQ's be placed in the chain? and which EQ's are better for Clean and for Distortion? Graphic EQ Parametric EQ Studio EQ 4 band shift EQ Mid Focus EQ Vintage Pre Thanks, Pratik

Just to know, since you have a PA and go direct in (and use in-ear monitoring), so what is the use of Atomic FRFR 50

i believe if i understand you correctly, u want to have the fender and the Mesa to toggle. if that is the case you will need to assign both of them to a single foot-switch,keep the fender activated and the Mesa de-activated. in that way you can have the fender and mesa simultaneously so eg FS1 - Fender and Mesa together, keep only the fender on, so you will have the red led on FS1, the time if you press the FS1 the fender will get deactivated and Mesa will be up. Hope this helps

:huh:

Just curious to know if we can setup differnt 'output' for differnet patches in pod hd500? Pwr Amp IN : Patch A Combo In : Patch B Stack in : Patch C Studio : Patch D Thanks, Pratik

you may want to check this: http://www.ehx.com/products/44-magnum :)

Why not try Bugera? All tube amp and fits your budget.

Hello, is there a way to calibrate the all the footswitches on the Pod HD500. What is hapenning is that the my FS1 does not respond when i press it the 1st time. I have to do it 2-3 times to activate or de-activate. Please help. Pratik

Hi, so is that we need to have to run it 'stereo' for the Pannig or will the mono do thanks - Pratik

I believe you will need to have dual amps and set the dealys, use PAN as well. :)

I believe that's his question..:)

I dont use the Wah on the pod, i have a Crybaby DB01 (Dimebag signature Wah)...It's a beast.. :)

I opened the patch in HD Edit after change the extension to .h5e, and it showed all the Amp and Cab parameter at 12 o'clock. Pic attached cab parameters.bmp Amp parameter.bmp

But in the POD HD Edit it shows the speaker and mic settings as well for the 'pre'...so should we consider that even if it shows up, they do not respond when the 'pre' models are selected:unsure: