jandrio

mine 2..... (since I got my 69s)

u can use the fx loop and send stereo signal 2 ur amp and the xlr's 4 stereo signal 2 PA. more dtls+demo patches here

if running win7 and later, try disabling driver signature enforcement... http://line6.com/sup...000/#entry51227

on a Workbench HD-JTV preset, set "Magnetics Blend" = "Mags" (100%). now, the 1/4" out (VDI also) must (?) vary as per "Preset Volume" setting (range=-20db, +6db)...

ok, let me b more specific: On pages 12-13 of the "James Tyler Variax Pilot's Guide" there r various procedures abt "Creating custom alt tunings" and various "Factory reset options" (c attached screenshot). Anybody tried those with 2.1 or 2.0 f/w?

u can also convert by drag 'n drop...

What r they thru the VDI ?

My q was concerning the abv, not a flash update... I know that on pre 2 f/w versions, by pressing 'n holding the Guitar Model Selector until the backlights behind both this knob and the Alt Tuning knob start flashing, I enter in Variax Mode and I can access Virtual Capo. Does this feature apply also on latest 2.1 f/w?

@OP: if running win7 and later, try disabling driver signature enforcement... http://line6.com/sup...000/#entry51227

here they r...

? ! ?

I thought the only diff is the +20% DSP power, isn't it? modelling software/algorithms r the same, aren't they?

Is there a factory reset on the JTV similar to the HD500?

Correct !

this is NOT a L6 problem, it's n operating system problem...

just nother verification of previous posts...

if running win7 and later, try disabling driver signature enforcement... http://line6.com/sup...000/#entry51227

http://line6.com/support/topic/7510-anybody-experience-any-issues-with-the-mechanical-foot-switches-on-the-hd500x/?do=findComment&comment=52370

believe or not my friend, it is true, it's easy, it is good and it is HD500 ! match HD500 with a JTV and it's even better...

besides HD500+DT25 and amplifi, there is also a third option, HD500 + FRFR speaker(s). I believe the JTV+HD500 bundle is unbeatable as far as sound fields/potential r concerned. amplifi is based on old-version modelling, HD500 stands for High Definition. u can control the JTV+HD500 bundle through a netbook PC/MAC, which u must anyway have with the amplifi option, cause u need the PC/MAC in order 2 tweak the JTV. below u can read an excellent post by ColonelForbin, who did a thorough market research 4 active monitors http://line6.com/support/topic/6473-pod-500-studio-monitors/?do=findComment&comment=44185 also a very well documented comparison btwn HD500 'n amplifi from same user: http://line6.com/support/topic/6960-pod-hd-vs-amplifi-fx100/?do=findComment&comment=47715

u will also experience latency.

try reflashing + reset + calibration... http://line6.com/support/topic/7546-pedals-and-extpressions-1-and-2-in-pod-hd500x/?do=findComment&comment=52480

u r welcome.

place a studio EQ or noise gate (100/0) b4 the color drive 'n match it's status with the LoResDelay. Assign same FS4. Now u got the light opertating as u wish (the red FS4 light is ON when the delay/ngate is on, and OFF when the color drive is on)... studio EQ and noise gate do not colour ur sound. Demo HD500X patch attached.. ALIENUX DEMO PATCH.zip

http://www.youtube.com/watch?v=fmvWNKHPg9c