jandrio

cld u pls specify which position (sec) this extra beat skip is?

Try one of foll: a. Insert an FX loop in ur chain (place it at the end of the chain if u want a plain clean boost, or in front of an amp or dist pedal to drive them harder if u want more gain). Use short jumper cable 2 connect the FX loop out to the FX loop in. Set the FX loop return at taste (eg +4dB). Assign the FX loop to a switch as (clean) boost 4 solos. . If stereo is a must, use appropriate jumper. b. Use a Studio eq in ur chain (c abv regarding placing). Set gain at taste (eg +4db). c. Assign EXP-1/2 to amp CH VOL (min = rythm, max=solo).

output mode affects cab/mic simulation. setting 2 "studio/direct" u get excellent acoustics/full models WITH cab/mic from Lspeaker 'n u shld only feed the hd500 pre/no cab/mic 2 the dt amp+cab. just guessing, since i do not own a dt...

alternatively, u cld use tronical autotune.... with just 1 strum 'n all strings r perfectly tuned...

check out this tone: http://line6.com/customtone/tone/408465/ it migtht provide u with ideas abt it's usage. it uses 4 preamps, no amp. sound sample on this vid...

consider this investment as a "health insurance" fee 4 ur equipment. I always feed my JTV+HD500 via a ups+voltage regulator+surge protector, etc, etc. I never trust venue's power circuits...

u r welcome.

dual paths give u the option of having 2 different signals coming out of the left and right outputs. how r u going 2 take advantage of this cool feature, it's up 2 u, i don't know ur specific amp configuration/capabilities. suggested further reading: http://foobazaar.com/podhd/toneGuide/ http://line6.com/sup...ing-schematics/ http://line6.com/dat...h ( Rev D ).pdf http://line6.com/dat...h ( Rev A ).pdf http://line6.com/dat...h ( Rev A ).pdf rgds/john

u r welcome..

en anglais sil vous plait...

..and PODHD500+JTV is the B-E-S-T !

yes u can do this with the dual path feature of the hd500. if using a JTV it is even more simple: send the 1/4" out of the JTV 2 ur amp and the VDI 2 the HD500. voila!

this is the official L6 vid: James Tyler Variax Virtual Capo Video Tutorial

pls give us more dtls: -only acoustic patches? -mags were performing ok? -other models were performing ok? -did u try the hd500 with nother el guitar besides the JTV and if yes, was it performing ok? -did u send the acoustic audiovia xlr 2 pa? pls specify ur conn diagram. -did u feed the hd500 via ups/voltage regulator, or direct from the el.power socket?

since output mode affects ONLY MIC+CAB emulation, I believe that if u send the acoustic modesl (yes, u cld even achieve stereo!) via XLR 2 pa wld sound perfect. so i suggest u set output mode 2 whatever sounds best 4 ur dt amp via L6 Link...

if running win7 and later, try disabling driver signature enforcement... http://line6.com/sup...000/#entry51227

+1

more dtls 'n demo patches here: http://line6.com/support/topic/7343-jtv69-hd500x-mesa-boogie-395/?do=findComment&comment=51253

I think that after the latest f/w updates on JTV/workbench-HD/HD500 and the complete integration of all these products, a wireless VDI 2-way 2-channel communication bundle between JTV+HD500, with power provided by the existing JTV battery pack module will b the last finishing touch to a good painted table...

http://line6.com/support/topic/3622-hd500x-jtv-hybrid-setup-is-this-possible/?do=findComment&comment=23991

I think u got it right my friend!

welcome 2 the 2.10 wonderland...

absolutely true! in these cases, during sound check prior the show, try feeding the pa with a couple of mp3 studio-mastered tracks of the songs u r gonna play and tweak the "master" eq till u get acceptable results...

+1