-
Posts
1,203 -
Joined
-
Last visited
-
Days Won
26
Everything posted by jandrio
-
i think the quoted post clearly explains how the pod actually handles the signal...
- 9 replies
-
- lincoln brewster
- preset
- (and 4 more)
-
Jtv69 Hd500x Mesa Boogie 395
jandrio replied to tedthebear's topic in James Tyler Variax Guitars / Workbench HD
input 1=variax mags input2=variax path a=HD500x pre, last FX Loop with 0 return path b=acoustic mixer hard pan 100%L + 100%R select acoustic model on variax. connect FX send TRS STEREO out to Mesa Boogie 395 stereo valve power amp connect right 1/4" (or XLR) out to PA u cld also send a STEREO signal 2 PA, just put at leat one stereo FX block AFTER the mixer (note that mixer R is now centered and L is muted). other possible layouts exist, pls try attached 'n adv if ok... tedthebeardemotones.zip -
check out this one: Pod Hd 500 - 500x *new* Routing Schematics
- 9 replies
-
- lincoln brewster
- preset
- (and 4 more)
-
on Win7/64 bit there might be a situation where u wld have to disable driver signature enforcement on every reboot in order for the Line 6 drivers to work... check this atricle on how to do this. the shortcut is 2 'hibernate' or 'sleep' yr computer 2 avoid needing 2 go through this hassle...
-
Wtf Is Going On With My Variax And Workbench?
jandrio replied to Geamala's topic in James Tyler Variax Guitars / Workbench HD
http://line6.com/support/topic/7299-java-tm-se-binary-not-working/?do=findComment&comment=50394 even with bright new machines, bro murphy’s law still proves itself... -
Mixing Mag And Modeled Pickups
jandrio replied to Geamala's topic in James Tyler Variax Guitars / Workbench HD
if u want 100% magnetic bridge, just turn off modelling (push the model selector knob)... then, if u want blend of magnetic bridge and modeled pickup which also would have to be position 1, turn modelling on (push again model selector knob)... does this sound ok 4 u? -
Java Tm Se Binary Not Working
jandrio replied to blocka's topic in POD 2.0, POD XT, Pocket POD, FloorPODs
this is NOT a PODXT forum -
Watch out for fluorescent lights and dimmer switches as they can add lots of 60hz noise. Also PSUs usually found in studio environments may "load" the sound with hum/noise. Check out this one: DIY fix - guitar repair - Fixing excessive hum - fixing bad grounds Search 4 "guitar hum". I am sure u will find useful info out there.
-
or place a noise gate @ the end of ur chain 2 sum up 2 mono... (noise gate settings 100/0)
-
Multiple Dt50's Plus L2t
jandrio replied to u182155's topic in Dream Rig - Line 6 Product Integration
+1 bravo danjay67 ! this is exactly the definition of creative thinking ! -
i believe that monkey first downloads the fw file in a temp directory (folder) and it then updates the L6 device from this file, so updating directly thru the button is as safe as updating from file... it is more important 2 ensure continuous power supply during the "fw writing 2 device" phase of the update process...but again, who knows, maybe I'm wrong...
-
u r welcome
- 14 replies
-
- hd500 edit
- windows 7
-
(and 2 more)
Tagged with:
-
Mixing Mag And Modeled Pickups
jandrio replied to Geamala's topic in James Tyler Variax Guitars / Workbench HD
then follow arislaf tip. -
Good Twang Patch Spank Position 2 And 4
jandrio replied to aeugle's topic in James Tyler Variax Guitars / Workbench HD
here it is (zipped). compared to factory preset, there r mods on pu positions, string vol and pots. Arislaf_Spank.zip -
Mixing Mag And Modeled Pickups
jandrio replied to Geamala's topic in James Tyler Variax Guitars / Workbench HD
if u have a HD500, follow these steps: 1. set JTV selector switch 2 pos 1 (so u have mags bridge). 2. prepare a patch with lester bridge model with input 1=variax + input2=variax mags 3. load this patch (it is important to load the patch AFTER positioning the JTV selector switch) now u have lester bridge AND mags bridge. with this method u can actual mix ANY mags valid combination with ANY model example 1: mags bridge+middle (pos 2) with lester neck+middle (!) example 2: mags bridge+middle (pos 2) with reso3 neck+brigde the combis are really uncountable.. -
Mixing Mag And Modeled Pickups
jandrio replied to Geamala's topic in James Tyler Variax Guitars / Workbench HD
from workbench hd manual (page 10): -
perform a Global Settings reset
-
check out this one. bear in mind that if u using only one XLR works out 4 mono patches, not 4 stereo ones...
-
no
- 14 replies
-
- hd500 edit
- windows 7
-
(and 2 more)
Tagged with:
-
Wtf Is Going On With My Variax And Workbench?
jandrio replied to Geamala's topic in James Tyler Variax Guitars / Workbench HD
even with bright new machinery, the automatic updates and/or some other ...goodies (programs/apps) might cause "unexpected" behaviour... -
I have 2 JTV batteries 4 my 69s, but since I also own a HD500, I have never used them. However, at the lives, I always carry one charged battery (4-2 leds on) with me as a “disaster plan†4 power-feeding the JTV in case the HD500 breaks down. After a period of time the battery loses its 4 leds and self discharges 2 1 led. I then fully charge the other one and so on… So my question is: what is the best approach 2 follow in order 2 maximize the batteries life: 1.1.Must I follow a cyclic charge-discharge schedule? Does this approach wear down the batteries? 1.2. What is the max allowable charge-discharge limit? Or should I forget the “disaster plan†and: 2.1. Just store them discharged? 2.2. Just store them fully charged?
-
Wtf Is Going On With My Variax And Workbench?
jandrio replied to Geamala's topic in James Tyler Variax Guitars / Workbench HD
One major critical factor that nobody pays any attention at all is the computer’s operating system (OS). Remember that all L6 s/w operates on top of the OS. If the OS is not working flawlessly and virus-free (and believe it or not, a certain OS in many cases it is not), then nothing performs as expected. So, as a rule of thumb, always perform a FW update after a FRESH REBOOT, with no other "..daemons" running on ur PC. -
Mixing Magnetics With Models
jandrio replied to dtray187's topic in James Tyler Variax Guitars / Workbench HD
c abstract from workbench hd manual (page 10) on foll: http://line6.com/support/topic/2101-workbench-hd-connection-through-pods/page-7?do=findComment&comment=47129 The correct answer is that whatever pickups u have selected via the selector switch, those ones will b blended. -
Workbench Hd Connection Through Pods
jandrio replied to flabergaster's topic in James Tyler Variax Guitars / Workbench HD
JTV firmware update thru HD500 was already feasible with JTV flash v2.00. Model tweaking was not possible and this is what the new release addresses.