zolko60

Thank you. The larger IRs repositorium is there:

Only one IR loader that used to add some eq was Peavey Revalver 4 RIR. I have not noticed any malfunction of Helix IR loader. I usually check IRs with NadIR before I load them to Hx. No audiable difference. I used LeCab way back in 32bit times. Check if you accidentially turn Hx IR LPF on. Some Hx IRs (called Cabs) are playable. I don't understand your experiment proposal. You are the one claiming Hx IR loader is "dark". I can't confirm that. The burden of proof is on your side.

I have no experience in midi over usb with helix on android. I used to play with some midi/osc android apps over wifi but not the way I could help you. I don't even know if direct usb midi connection Helix - Android is possible. However I found that topic interesting, because lot of midi/osc apps are common for iOS and Android.

No.

Scarletts are known for huge gain at HiZ inputs. 1. What digital headroom can you archive at minimum gain? 2. Have you checked different sources behavior? 3. Have you checked larger buffer sizes?

No. The unity gain is for input/output team. What comes in, comes out at no gain change. Yes you can. If line level signal is within the headroom, there is no problem.

True for line level input, line level output pair and instrument level input, instrument level output pair.

As far as I can figure it out, the Volume Knob controls analog attenuator for chosen Hx outputs. If this is the case, when you have clipping at DSP chain or DA converter, Volume Knob can not help you. It can protect only overdrive of next input Hx is connected to.

Helix Core is Sharc DSP. This is 12 years old horse. I would expect it to be dead about firmware 6 time.

You bet - you lose! I can't wait for: https://line6.ideascale.com/a/dtd/Specifications-publishingof-I-O-imedances-FS-levels-etc/943915-23508#idea-tab-details "Snapshot safe", "Snapshot protect" - disabling snapshot bypass automation for chosen DSP blocks. https://line6.ideascale.com/a/dtd/Snapshots-2-0-Overlays!/830999-23508#idea-tab-comments https://line6.ideascale.com/a/dtd/Unaffected-blocks-in-snapshots/836513-23508#idea-tab-comments https://line6.ideascale.com/a/dtd/Disable-Snapshots-for-Individual-FX-Blocks/916071-23508#idea-tab-comments https://line6.ideascale.com/a/dtd/Snapshot-INDEPENDENT-effect/836872-23508#idea-tab-comments https://line6.ideascale.com/a/dtd/Exclude-specific-effects-blocks-from-Snapshots/893972-23508#idea-tab-details Maybe sometimes at 5.30 firmware ;) And about 8.8 Hx firmware, HxII Heel Switch :D https://line6.ideascale.com/a/dtd/Heel-switch-for-EXP-Pedal-for-Helix-II/944029-23508?submitted=1#idea-tab-comments

Nobody is mad at you. Please don't make things up. Don't use that hub any more. ASIO4ALL does not let any multimedia sound to play for the devices it grabs as "fake ASIO".This is the expected behavior described in A4A manual. Helix Volume Knob is really analog attenuator which can control only Helix outputs. Extraordinary claims require extraordinary evidence. People with routing dyslexia should not make any complicated routing. 53 is nice age! Cheers!

Never mind. I have asked three questions. Sure you can use something with no issues until you start to have issues. The issue you happen to have is because you are using two interfaces. That makes you confused. ASIO4ALL - poor WDM driver overlay is used to aggregate devices. I don't even know if Focusrite mikser have any chance to work corretly in such enviroment. For me it is begging for issue.

It depends what your goal is. Do you really need to aggregate interfaces? Do you like to be confused with using two interfaces with such a little knowledge how to use them both?

It makes no sense. IRs are not even remotely any "amp sims".

What IR technology are you talking? What IR (except Kemper) technology can reproduce Marshall or Vox overdrive? Have you ever swapped amps/cabs and could not recognize your amp behavior?

Of course Kemper technology has its drawbacks. It can not predict how circuts will behive outside the impulse range. I am experiencing a lot of companies and guys claiming that eg. IR should be made with tube amp because it adds that "tube feeling". Their IRs are almost useless for me - captured with impedance curve affected frequency response and distortion converted to IR noise. :(

If you feel IRs are enough for capturing amps, go for it. You don't need any amp modeler. But seriously - classical FIR, IIR technology do not capture any distortion (non linearity). They can capture only frequency ,phase and reverb response. Kemper impulse technology is brilliant. For so many years it has not been replicated in any other DSP algorithm.

What a nice number of that update! 2 dot 8. Eight is the lucky number in China. I knew it wolud be greater than 2.7 but I did not expect exactly 2.8. ... and that promise of free pet pony for SKU core metal players! Yummy!

Good luck!

It can be! I do not know anything about Studio One 4 and your operating system, but on Windows, any ASIO DAW/host I use requests sample rate and buffer size and gets it. No pops and crackles, just higher latency than expected.

Nope. Helix LT, Floor, Rack outputs and inputs all sampling rates up to 96kHz thru USB on Win and OSX. Helix LT, Floor, Rack outputs all sampling rates thru AES/EBU.

Helix outputs and inputs all sampling rates up to 96kHz thru USB on Win nad OSX. LT, Floor, Rack outputs all sampling rates thru AES/EBU.

You can use ASIO4ALL to aggregate audio interfaces, but the latency will go up about ten times. Not recommended.