Search the Community
Showing results for tags 'hx efx'.
Found 7 results
-
I've attached my Mission EP1-L6 to the HX Effects and I think I've set up the routing appropriately. I'm getting volume control, but it's a very sharp increase in volume and then not much. How do I set it up so that the sweep gets used more effectively? Here's a photo of my setup, with where I think the volume is. Even when the Position is set to Curve, it's a very sharp initial increase.
-
HI! I have a faves of chase bliss audio Do you think I can do something with the HX effects via MIDI? I think it could be interesting
-
I've upgraded from a Spider iii to the Spider Vmkii and I am blown away by the versatility of this modelling amp and the numerous built in effects that it has and that I can assign and control with the shortboard Mkii that I already had. However, I want to use some effects through a Boss rc30 looper. I have a ZoomG2 but don't really like the effects and lack of clarity that it produces and so I have been looking at getting a Boss ME80 to feed effects into the looper and also use as a multi effects pedal through the amp. I can't see that I would need the amp modelling of the pedal, as the Spider has that covered. I only play at home, so I won't be gigging with this set-up. I also don't want to spend a fortune on something like the Line 6 PodGo only for looping purposes as it will be doubling up a lot of the effects in the Spider V. I know that the ME80 is 7 years old now so my question is, is there something which offers multi effects without the amp simulations which would be more suitable. I have considered the M5 pedal, but may want to use more than one effect at a time to the looper. I also may want to use an octaver to add bass lines, so any suggestion would need to have an octave function. For a hobby guitarist, it is a pity that I can't feed the effects from the amp through the looper as there are some great bass tones and other sounds on the Cloud for the Spider V! Are there any other solutions or considerations that I am missing?
-
Hello, NEED HELP...PLEASE! I have an HX Effects and I am using Command Center to program a button inside a preset to flip between snapshot 1 and snapshot 2. I have the button programed on PRESS/RELEASE so that when I PRESS it goes to snapshot 2 and REALEASE it goes to snapshot 1. I currently have it set as follows, and when press the button it LATCHES to snapshot 2, then when I want I press the button again it RELEASE and it goes to snapshot 1, this is what I am looking for! The issue is, I set this up in one preset, and when I went to another preset to repeat this process the button is only momentarily switched, NOT latching. What did I do right the first time that I am messing up on repeat?
-
Hi! So I just got the jackson audio broken arrow v2 and I been trying to control it via midi from the HX effects, i triple check my midi channel trying to see if anyone here has some experience with it thanks!
-
I have the Helix set up to send midi program changes to my Bias Amp to switch amps per snapshot. Problem is, when I switch presets on the HX EFX, I still have to go in and hit a snapshot to send the program change. I would like to change the amp when I change presets. Is there any way to send a PC message on preset change?
-
Trying to use my synth with my hx effect via efx loop return. My bass is the main input so it's going to the input in jack but i have a twelve step foot pedal board midi connected to a korg volca fm. The out of the volca is going into efx loop one return. Shouldn't this work?
