highline-2004
Members-
Posts
30 -
Joined
-
Last visited
-
Days Won
1
Everything posted by highline-2004
-
Trying to follow this tip, from this page, but the 'Hotkey' option is not available in HX Edit. From the command pull-down menu select "Hotkey." 'Hotkey' does not appear in my dropdown - see attached screenshot. What am I missing? TIP: It's much faster and easier to program keystrokes from HX Edit 2.80. Open the Command Center window, select a footswitch or Instant command, and from the Command pull-down menu, select "Hotkey." Click the small keypad icon and simply enter the keystroke from your computer keyboard. Don't forget to customize the switch label! Solved - i updated HX Edit and the option is now present. screenshot---HotKey-option-missing-
-
- hotkey templates
- programming
-
(and 1 more)
Tagged with:
-
I was having some issues, my HX Effects just stopped out putting sound, this has happended before. Such a bummer this happens, and it's just out of the blue. With analog bypass on you can hear sound. So I rolled back to 2.70 and it's working again. Now when I download 2.82 on the Mac, I can't open the file. Here's the error and screenshots: “HX Edit.pkg” can’t be opened because Apple cannot check it for malicious software. This software needs to be updated. Contact the developer for more information. Any advice would be greatly appreciated.
-
Finally I found a link that gave me just an .hxf file/
-
Thanks @rsvette12- tried that as well, and it brings up the open file dialog...
-
Thanks @datacommando for the quick reply. I followed these instruction, but what I download is a .dmg file, which is the HX Edit Installer. It does not give me a .hxf file with firmware... I installed that file, and still, same result, run the installer, and get this message - 'There are no available updates for this device." Any suggestions?
-
I don't see any firmware options when I use the updater? "There are no available updates for this device"
-
My HX Effects just stopped outputting sound, out of the blue, but when I use analog bypass you can hear the sound. I tried updating to 2.81, and still no luck. I had this issue before, posted about it and - and I had to roll back the firmware, although I'm not seeing exactly where the older firmware is available. downloaded HX Edit 2.70, Launched Line 6 Updater 1.15, and when I open the updater, it says 'There are no available updates for this device." Where can I find the older firmware update? So frustrating, any help would be greatly appreciated.
-
@phil_m Both answers were super helpful > I went with your second option and applied the Playback parameter. Awesome! Thank you!
-
I'm using an Ernie Ball VP JR running out of Expression Pedal port 2. I have a looper followed by the volume pedal in my chain. I'm using the volume pedal, behind the looper to control the level of my loops.When I kick the pedal to heel down, it shuts off the volume pedal - so the loops fade out - then abruplty come back as the volume pedal is bypassed. I can't seem to find a way to turn this toe/heel bypass off. I want to be able to put it to either position and ignore the bypass feature. Is there a way to accomplish this? Page 29 in the manual: "Position determines where in the expression pedal's travel the block is enabled or bypassed. 0% is heel down; 99% is toe down."
-
Expression pedals......what you use and why?
highline-2004 replied to themetallikid's topic in Helix
Didn't care for the feel of the Mission Engineering - didn't feel real for some reason. Couldn't use it for the wah or pitch shifting with the HX. -
Is that Morley heavy? I have been using my Ernie Ball Volume JR. for pitch shift expression.
-
@silverhead Thanks a million! Yes, that worked. Just opened up a whole new level! I hope they make the FS1 and FS4 additional snapshots.
- 2 replies
-
- snapshots
- not working
-
(and 2 more)
Tagged with:
-
Too bad the HX doesn't model the Languedoc ;)
-
HX effects NO SIGNAL . Perfect Signal when unit is off
highline-2004 replied to Kback0409's topic in Helix
Try reverting to the older firmware first - the original. That fixed my problem. Then I updated to the latest. -
I am experiencing strange behavior when I attempt to work with snapshots. I have followed the manual but it's not doing what the manual says it should. I press both preset button simultaneously, and it shows all four snapshots blinking... Then if I click a snapshot, it kicks me back to the presets. I've attached a movie to show what's going on... I have updated to the latest firmware 2.54.0. Any help would be appreciated. Snapshots-HX-not-working-1.mov Maybe I'm missing something?
- 2 replies
-
- snapshots
- not working
-
(and 2 more)
Tagged with:
-
I rolled back the firmware to 2.50 and now everything is working. I think it was corrupted somewhere along the way.
-
No sound. When it's powered down, and I'm plugged in, audio passes through to the amp. When I boot up the HX, the audio cuts out once it's up and running. I didn't change any settings since my last session. Checked my cables - they are brand new, but checked them without the unit anyhow, they work. I did a factory reset. I have updated the latest firmware (2.54.0). I've only had it for a little over a month. Any suggestions?
-
@ADBrown thank you
-
I don't want to hear the signal when I'm tuning. Is there a way to be silent when you tune? Can't seem to find a way. What am I missing please? And yeah, I agree with the most of the OP's who point out this tuner needs work.
-
I am having an issue where multiple foot switches are showing multiple assignments > for example, the scribble says - MULTIPLE (3) - but withing this preset, i have only assigned one block to each foot switch. If I enter Signal Flow, and delete each effect one at a time, then hit home, each FS still has an assigment of MULTIPLE (2) or MULTIPLE (3). When I hit the action button, the 'CLEAR BLOCK' is greyed out. How can I clear out everything from a preset with one action?
-
Thanks for the info. Is there anything to be said about putting the wah before the HX. So Guitar > Wah > HX, and not using a block for your wah? I tried this, and my wah sounded terrible. Is the HX not meant to have pedals before it on the board? I put my wah first in my chain always.
- 10 replies
-
- toe switch
- compatible
-
(and 2 more)
Tagged with:
-
Wasn't trying to be Snarky, so thanks for your thoughtful follow up.
- 10 replies
-
- toe switch
- compatible
-
(and 2 more)
Tagged with:
-
Thanks - I read the manual, and that's not what I'm after - please refer to my post above. Sometimes I like to leave my wah in either Heel down or all the way for extended periods of time. Would be nice if you could use a toe switch expression pedal with this unit.
- 10 replies
-
- toe switch
- compatible
-
(and 2 more)
Tagged with: