Jump to content

Search the Community

Showing results for tags 'compatible'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Community Support
    • Multi-Effects Units
    • Variax Instruments
    • Amplifiers
    • Computer Based Recording
    • Live Sound
    • Pedals/Controllers
    • Dream Rig - Line 6 Product Integration
  • General Discussion
    • Share your Settings
    • Line 6 Lounge

Categories

  • General FAQ
    • Operating System-specific Information
  • Tutorial Videos
  • Effects/Controllers
    • HELIX/HX
    • DL4 MkII Stompbox Modeler
    • FBV Controllers (MKII / 3)
    • M5
  • Amplifiers
    • Powercab
    • Catalyst
    • Spider V
  • POD
    • POD Go
    • POD HD X
    • Pocket POD
  • Guitars
    • JTV / Shuriken / Variax Standard / Workbench HD
  • Relay/XD-V Digital Wireless
  • Recording
    • Helix Native
    • Metallurgy
    • Echo Farm/Amp Farm
    • POD Farm 1/2.0/2.5
    • Computer Audio Set Up and Troubleshooting
  • Legacy Products
    • POD
    • Amps
    • 1st Gen Variax Guitars / Bass / Workbench
    • Effects and Controllers
    • AMPLIFi Series
    • Live Sound
    • Digital Wireless
    • Mobile Products
    • POD Studio / Tone Port / GuitarPort
    • Software
    • Dream Rig

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Registered Products

  1. 日本語は下記をご覧ください Voir ci-dessous pour le Français Siehe unten für Deutsch Vea abajo para Español Vedi sotto per l'italiano Line 6 Software compatible with macOS 13 Ventura/Intel The following applications have been tested for general compatibility with macOS 13 Ventura running on Intel CPU systems, with no issues found. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit POD HD300 Edit POD HD400 Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Universal Intel/M1 Driver 1.0.0 (TonePort/POD Studio/POD HD) Line 6 Software with limited compatibility with macOS 13 Ventura/Intel POD Farm 2.5 (Standalone/Plugin): Pod Farm 2.5 works as a standalone app. It also works as a 64-bit plugin in Ableton (AU), Garageband (AU), Logic (AU), Reaper (AU), and Studio One (AU). Pod Farm 2.5 does not work as a 32-bit VST in Ableton, Cubase, Reaper, and Studio One. Echo Farm 3.0: Echo Farm works in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST), and Reaper (AU/VST). Echo Farm does not work in Garageband (AU). Believed to be iLok-related. We suggest ensuring that the latest version of your DAW and iLok License Manager are installed, and the licenses re-authorized. Known issues on the Mac forum: Fatal Error: 100001 https://discussions.apple.com/thread/253693434 Amp Farm 4.0: Amp Farm works in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST), and Reaper (AU/VST). Amp Farm does not work in Garageband (AU). Believed to be iLok related. We suggest ensuring that the latest version of your DAW and iLok License Manager are installed, and the licenses re-authorized. Known issues on the Mac forum: Fatal Error: 100001 https://discussions.apple.com/thread/253693434 Line 6 Hardware compatible with macOS 13 Ventura/Intel The following hardware products have been tested for general compatibility with macOS 13 Ventura running on Intel CPU systems, with no issues found when using the latest available Line 6 driver or the macOS 13 class-compliant driver, as applicable. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys 25/49 Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products GuitarPort Variax USB Interface Variax Additionally, the Apple Silicon M1 chip compatibility KB article lives here. We encourage anyone experiencing issues with our software to contact our support staff at www.Line6.com/company/contact. Line 6ソフトウェア製品のmacOS 13 Venturaとの互換性情報 以下のアプリケーションのmacOS 13 Venturaとの互換性を検証し、問題なく動作することを確認しています。このリストは、他のアプリケーションがテストされ、互換性があると見なされたときに、進捗状況に応じて更新されます。 Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Universal Intel/M1 Driver 1.0.0 (TonePort/POD Studio/POD HD) macOS 13 Ventura/Intelとの互換性が制限されたLine 6ソフトウェア POD Farm 2.5(スタンドアロン/プラグイン):Pod Farmは、Ableton(AU)、Logic(AU)、Reaper(AU)、Studio One(AU)でスタンドアロンおよびプラグインとして動作機能します。 Ableton、Cubase、Reaper、StudioOneではVSTとしては動作機能しません。 Echo Farm 3.0:Echo Farmは、Pro Tools(AAX)、Ableton(AU / VST)、Cubase(VST)、Logic(AU)、Studio One(AU / VST)、およびReaper(AU / VST)で動作します。Garageband(AU)では動作機能しません。 Amp Farm 4.0:Amp Farm は、Pro Tools(AAX)、Ableton(AU / VST)、Cubase(VST)、Logic(AU)、Studio One(AU / VST)、、Reaperで動作します。 Amp Farmは、Garageband AU では動作しません。 Line 6のハードウェアとmacOS13Venturaとの互換性 以下のハードウェア製品は、IntelCPUシステムで実行されているmacOS13 Venturaとの一般的な互換性についてテストされており、最新のLine 6ドライバーまたはmacOS13クラスコンプライアント・ドライバーを使用して問題 なく動作することを確認しています。 このリストは、他のアプリケーションがテストされ、互換性があると見なされたときに、進捗状況に応じて更新されます。 Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Line 6ソフトウェア製品との互換性で問題が生じている場合は、www.Line6.com/company/contactへアクセスし、サポートスタッフまでお問い合わせください。 Line 6サポートチーム Compatibilité des logiciels Line 6 avec macOS 13 Ventura La compatibilité générale des applications suivantes a été testée avec macOS 13 Ventura et aucun problème n’a été détecté. Cette liste sera mise à jour avec nos progrès sur d'autres applications au fur et à mesure qu'elles sont testées et jugées compatibles. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Universal Intel/M1 Driver 1.0.0 (TonePort/POD Studio/POD HD) Logiciel Line 6 avec compatibilité limitée avec macOS 13 Ventura/Intel POD Farm 2.5 (Autonome/Plugin): Pod Farm fonctionne de manière autonome et en tant que plug-in dans Ableton (AU), Logic (AU), Reaper (AU) et Studio One (AU). Pod Farm ne fonctionne pas comme un VST dans Ableton, Cubase, Reaper et Studio One. Echo Farm 3.0: Echo Farm fonctionne dans Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) et Reaper (AU/VST). Echo Farm ne fonctionne pas dans Garageband (AU). Amp Farm 4.0: Amp Farm fonctionne dans Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) et Reaper (AU/VST). Amp Farm ne fonctionne pas dans Garageband (AU). Compatibilité matérielle de Line 6 avec macOS 13 Ventura La compatibilité générale des produits matériels suivants a été testée avec macOS 13 Ventura exécuté sur des systèmes à processeur Intel, aucun problème n'ayant été détecté lors de l'utilisation du dernier pilote Line 6 disponible ou du pilote conforme à la classe macOS 13, selon le cas. Cette liste sera mise à jour avec nos progrès sur d'autres applications au fur et à mesure qu'elles sont testées et jugées compatibles. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Nous invitons toute personne qui rencontrerait des problèmes avec nos logiciel à contacter notre service d’assistance à l’adresse www.Line6.com/company/contact. L’équipe d’assistance Line 6 Line 6 Software-Kompatibilität mit macOS 13 Ventura Die folgenden Anwendungen wurden auf allgemeine Kompatibilität mit macOS 13 Ventura auf Intel-CPU-Systemen getestet, wobei keine Probleme festgestellt wurden. Diese Liste wird fortlaufend aktualisiert, sobald weitere Anwendungen getestet und für kompatibel befunden werden. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Universal Intel/M1 Driver 1.0.0 (TonePort/POD Studio/POD HD) Line 6 Software mit eingeschränkter Kompatibilität mit macOS 13 Ventura/Intel POD Farm 2.5 (Standalone/Plugin): Pod Farm funktioniert als Standalone und als Plugin in Ableton (AU), Logic (AU), Reaper (AU) und Studio One (AU). Pod Farm funktioniert nicht als VST in Ableton, Cubase, Reaper und Studio One. Echo Farm 3.0: Echo Farm funktioniert in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) und Reaper (AU/VST). Echo Farm funktioniert nicht in Garageband (AU). Amp Farm 4.0: Amp Farm funktioniert in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) und Reaper (AU/VST). Amp Farm funktioniert nicht in Garageband (AU). Line 6 Hardware-Kompatibilität mit macOS 13 Ventura Die folgenden Hardwareprodukte wurden auf allgemeine Kompatibilität mit macOS 13 Ventura auf Intel-CPU-Systemen getestet. Dabei wurden keine Probleme festgestellt, wenn der neueste verfügbare Line 6 Treiber oder der macOS 13 Class-Compliant Treiber verwendet wird. Diese Liste wird fortlaufend aktualisiert, sobald weitere Anwendungen getestet und für kompatibel befunden werden. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Dennoch möchten wir alle Anwender, die Probleme mit unserer Software haben, bitten, sich unter www.Line6.com/company/contact an unsere Support-Abteilung zu wenden. Ihr Line 6 Support-Team Compatibilidad del software de Line 6 con macOS 13 Ventura Se ha probado la compatibilidad general de las aplicaciones siguientes con macOS 13 Ventura y no se han encontrado problemas. Esta lista se actualizará con nuestro progreso en otras aplicaciones a medida que se prueben y se consideren compatibles. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Universal Intel/M1 Driver 1.0.0 (TonePort/POD Studio/POD HD) Software Line 6 con compatibilidad limitada con macOS 13 Ventura/Intel POD Farm 2.5 (independiente/complemento): Pod Farm funciona de forma independiente y como complemento en Ableton (AU), Logic (AU), Reaper (AU) y Studio One (AU). Pod Farm no funciona como VST en Ableton, Cubase, Reaper y Studio One. Echo Farm 3.0: Echo Farm funciona en Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) y Reaper (AU/VST). Echo Farm no funciona en Garageband (AU). Amp Farm 4.0: Amp Farm funciona en Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) y Reaper (AU/VST). Amp Farm no funciona en Garageband (AU). Compatibilidad de hardware de Line 6 con macOS 13 Ventura Se probó la compatibilidad general de los siguientes productos de hardware con macOS 13 Ventura que se ejecutan en sistemas de CPU Intel, y no se encontraron problemas al usar el controlador Line 6 más reciente disponible o el controlador compatible con la clase macOS 13, según corresponda. Esta lista se actualizará con nuestro progreso en otras aplicaciones a medida que se prueben y se consideren compatibles. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Si se presenta algún problema con nuestro software, lo invitamos a que se ponga en contacto con nuestro equipo de atención al cliente en www.Line6.com/company/contact. El equipo de atención al cliente de Line 6 Compatibilità del Software Line 6 con macOS 13 Ventura È stata testata la compatibilità delle seguenti applicazioni con macOS 13 Ventura, non è stato riscontrato nessun problema. Questo elenco verrà aggiornato con i nostri progressi su altre applicazioni in quanto testate e ritenute compatibili. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Universal Intel/M1 Driver 1.0.0 (TonePort/POD Studio/POD HD) Software Line 6 con compatibilità limitata con macOS 13 Ventura/Intel POD Farm 2.5 (Standalone/Plugin): Pod Farm funziona come standalone e come plug-in in Ableton (AU), Logic (AU), Reaper (AU) e Studio One (AU). Pod Farm non funziona come VST in Ableton, Cubase, Reaper e Studio One. Echo Farm 3.0: Echo Farm funziona in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) e Reaper (AU/VST). Echo Farm non funziona in Garageband (AU). Amp Farm 4.0: Amp Farm funziona in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) e Reaper (AU/VST). Amp Farm non funziona in Garageband (AU). Compatibilità hardware della linea 6 con macOS 13 Ventura I seguenti prodotti hardware sono stati testati per la compatibilità generale con macOS 13 Ventura in esecuzione su sistemi CPU Intel, senza che siano stati riscontrati problemi quando si utilizza il driver Line 6 più recente disponibile o il driver conforme alla classe macOS 13, a seconda dei casi. Questo elenco verrà aggiornato con i nostri progressi su altre applicazioni in quanto testate e ritenute compatibili. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Invitiamo chiunque rilevi problemi con il nostro software a contattare il nostro staff di supporto su www.Line6.com/company/contact Lo Staff di Supporto Line 6
  2. Thanks everyone for getting into the Spider V. We hope you’re enjoying all that it has to offer. We’ve found that with certain new product launches, it’s helpful to keep a running thread of your experiences with connecting various Android mobile devices, whether it works or not. With such a wide variance in offerings and specs, it’s impossible for us to test all of them, so maybe this thread will help answer some customer questions, while possibly helping Line 6 spot issues/trends with a given group of devices. Here is the Spider V / Android Device USB Compatibility Check article that should help you find out if your device support USB Host Mode, which is required for the Spider V Remote app to communicate with Spider V amplifiers. Please post your device model, Android OS, and Compatibility Check results. Thanks for your input. Please remember to visit https://line6.ideascale.com with any feature requests you may have.
  3. We have tested and found no issues with AMPLIFi, Catalyst, Firehawk, Mobile POD, and Spider Remote applications on iOS 15.4 [iPhone 11] and iOS 15.4 [iPad M1]. Sonic Port works on iOS 15.1 [iPhone 11], but is untested on iOS 15.1 [iPad M1] (although we expect it to work). Sonic Port VX works on iOS 15.1 [iPhone 11] and iOS 15.1 [iPad M1].
  4. 日本語は下記をご覧ください Voir ci-dessous pour le Français Siehe unten für Deutsch Vea abajo para Español Vedi sotto per l'italiano Line 6 Software compatible with macOS 12 Monterey/Intel The following applications have been tested for general compatibility with macOS 12 Monterey running on Intel CPU systems, with no issues found. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit POD HD300 Edit POD HD400 Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Audio-MIDI Driver 7.6.8 (TonePort/POD Studio/GuitarPort) Line 6 Software with limited compatibility with macOS 12 Monterey/Intel POD Farm 2.5 (Standalone/Plugin): Pod Farm 2.5 works as a standalone app. It also works as a 64-bit plugin in Ableton (AU), Garageband (AU), Logic (AU), Reaper (AU), and Studio One (AU). Pod Farm 2.5 does not work as a 32-bit VST in Ableton, Cubase, Reaper, and Studio One. Echo Farm 3.0: Echo Farm works in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST), and Reaper (AU/VST). Echo Farm does not work in Garageband (AU). Believed to be iLok-related. We suggest ensuring that the latest version of your DAW and iLok License Manager are installed, and the licenses re-authorized. Known issues on the Mac forum: Fatal Error: 100001 https://discussions.apple.com/thread/253693434 Amp Farm 4.0: Amp Farm works in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST), and Reaper (AU/VST). Amp Farm does not work in Garageband (AU). Believed to be iLok related. We suggest ensuring that the latest version of your DAW and iLok License Manager are installed, and the licenses re-authorized. Known issues on the Mac forum: Fatal Error: 100001 https://discussions.apple.com/thread/253693434 Line 6 Hardware compatible with macOS 12 Monterey/Intel The following hardware products have been tested for general compatibility with macOS 12 Monterey running on Intel CPU systems, with no issues found when using the latest available Line 6 driver or the macOS 12 class-compliant driver, as applicable. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys 25/49 Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products GuitarPort Variax USB Interface Variax Additionally, the Apple Silicon M1 chip compatibility KB article lives here. We encourage anyone experiencing issues with our software to contact our support staff at www.Line6.com/company/contact. Line 6ソフトウェア製品のmacOS 12 Montereyとの互換性情報 以下のアプリケーションのmacOS 12 Montereyとの互換性を検証し、問題なく動作することを確認しています。このリストは、他のアプリケーションがテストされ、互換性があると見なされたときに、進捗状況に応じて更新されます。 Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Audio-MIDI Driver 7.6.8 (TonePort/POD Studio/GuitarPort) macOS 12 Monterey/Intelとの互換性が制限されたLine 6ソフトウェア POD Farm 2.5(スタンドアロン/プラグイン):Pod Farmは、Ableton(AU)、Logic(AU)、Reaper(AU)、Studio One(AU)でスタンドアロンおよびプラグインとして動作機能します。 Ableton、Cubase、Reaper、StudioOneではVSTとしては動作機能しません。 Echo Farm 3.0:Echo Farmは、Pro Tools(AAX)、Ableton(AU / VST)、Cubase(VST)、Logic(AU)、Studio One(AU / VST)、およびReaper(AU / VST)で動作します。Garageband(AU)では動作機能しません。 Amp Farm 4.0:Amp Farm は、Pro Tools(AAX)、Ableton(AU / VST)、Cubase(VST)、Logic(AU)、Studio One(AU / VST)、、Reaperで動作します。 Amp Farmは、Garageband AU では動作しません。 Line 6のハードウェアとmacOS12Montereyとの互換性 以下のハードウェア製品は、IntelCPUシステムで実行されているmacOS12 Montereyとの一般的な互換性についてテストされており、最新のLine 6ドライバーまたはmacOS12クラスコンプライアント・ドライバーを使用して問題 なく動作することを確認しています。 このリストは、他のアプリケーションがテストされ、互換性があると見なされたときに、進捗状況に応じて更新されます。 Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Line 6ソフトウェア製品との互換性で問題が生じている場合は、www.Line6.com/company/contactへアクセスし、サポートスタッフまでお問い合わせください。 Line 6サポートチーム Compatibilité des logiciels Line 6 avec macOS 12 Monterey La compatibilité générale des applications suivantes a été testée avec macOS 12 Monterey et aucun problème n’a été détecté. Cette liste sera mise à jour avec nos progrès sur d'autres applications au fur et à mesure qu'elles sont testées et jugées compatibles. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Audio-MIDI Driver 7.6.8 (TonePort/POD Studio/GuitarPort) Logiciel Line 6 avec compatibilité limitée avec macOS 12 Monterey/Intel POD Farm 2.5 (Autonome/Plugin): Pod Farm fonctionne de manière autonome et en tant que plug-in dans Ableton (AU), Logic (AU), Reaper (AU) et Studio One (AU). Pod Farm ne fonctionne pas comme un VST dans Ableton, Cubase, Reaper et Studio One. Echo Farm 3.0: Echo Farm fonctionne dans Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) et Reaper (AU/VST). Echo Farm ne fonctionne pas dans Garageband (AU). Amp Farm 4.0: Amp Farm fonctionne dans Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) et Reaper (AU/VST). Amp Farm ne fonctionne pas dans Garageband (AU). Compatibilité matérielle de Line 6 avec macOS 12 Monterey La compatibilité générale des produits matériels suivants a été testée avec macOS 12 Monterey exécuté sur des systèmes à processeur Intel, aucun problème n'ayant été détecté lors de l'utilisation du dernier pilote Line 6 disponible ou du pilote conforme à la classe macOS 12, selon le cas. Cette liste sera mise à jour avec nos progrès sur d'autres applications au fur et à mesure qu'elles sont testées et jugées compatibles. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Nous invitons toute personne qui rencontrerait des problèmes avec nos logiciel à contacter notre service d’assistance à l’adresse www.Line6.com/company/contact. L’équipe d’assistance Line 6 Line 6 Software-Kompatibilität mit macOS 12 Monterey Die folgenden Anwendungen wurden auf allgemeine Kompatibilität mit macOS 12 Monterey auf Intel-CPU-Systemen getestet, wobei keine Probleme festgestellt wurden. Diese Liste wird fortlaufend aktualisiert, sobald weitere Anwendungen getestet und für kompatibel befunden werden. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Audio-MIDI Driver 7.6.8 (TonePort/POD Studio/GuitarPort) Line 6 Software mit eingeschränkter Kompatibilität mit macOS 12 Monterey/Intel POD Farm 2.5 (Standalone/Plugin): Pod Farm funktioniert als Standalone und als Plugin in Ableton (AU), Logic (AU), Reaper (AU) und Studio One (AU). Pod Farm funktioniert nicht als VST in Ableton, Cubase, Reaper und Studio One. Echo Farm 3.0: Echo Farm funktioniert in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) und Reaper (AU/VST). Echo Farm funktioniert nicht in Garageband (AU). Amp Farm 4.0: Amp Farm funktioniert in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) und Reaper (AU/VST). Amp Farm funktioniert nicht in Garageband (AU). Line 6 Hardware-Kompatibilität mit macOS 12 Monterey Die folgenden Hardwareprodukte wurden auf allgemeine Kompatibilität mit macOS 12 Monterey auf Intel-CPU-Systemen getestet. Dabei wurden keine Probleme festgestellt, wenn der neueste verfügbare Line 6 Treiber oder der macOS 12 Class-Compliant Treiber verwendet wird. Diese Liste wird fortlaufend aktualisiert, sobald weitere Anwendungen getestet und für kompatibel befunden werden. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Dennoch möchten wir alle Anwender, die Probleme mit unserer Software haben, bitten, sich unter www.Line6.com/company/contact an unsere Support-Abteilung zu wenden. Ihr Line 6 Support-Team Compatibilidad del software de Line 6 con macOS 12 Monterey Se ha probado la compatibilidad general de las aplicaciones siguientes con macOS 12 Monterey y no se han encontrado problemas. Esta lista se actualizará con nuestro progreso en otras aplicaciones a medida que se prueben y se consideren compatibles. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Audio-MIDI Driver 7.6.8 (TonePort/POD Studio/GuitarPort) Software Line 6 con compatibilidad limitada con macOS 12 Monterey/Intel POD Farm 2.5 (independiente/complemento): Pod Farm funciona de forma independiente y como complemento en Ableton (AU), Logic (AU), Reaper (AU) y Studio One (AU). Pod Farm no funciona como VST en Ableton, Cubase, Reaper y Studio One. Echo Farm 3.0: Echo Farm funciona en Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) y Reaper (AU/VST). Echo Farm no funciona en Garageband (AU). Amp Farm 4.0: Amp Farm funciona en Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) y Reaper (AU/VST). Amp Farm no funciona en Garageband (AU). Compatibilidad de hardware de Line 6 con macOS 12 Monterey Se probó la compatibilidad general de los siguientes productos de hardware con macOS 12 Monterey que se ejecutan en sistemas de CPU Intel, y no se encontraron problemas al usar el controlador Line 6 más reciente disponible o el controlador compatible con la clase macOS 12, según corresponda. Esta lista se actualizará con nuestro progreso en otras aplicaciones a medida que se prueben y se consideren compatibles. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Si se presenta algún problema con nuestro software, lo invitamos a que se ponga en contacto con nuestro equipo de atención al cliente en www.Line6.com/company/contact. El equipo de atención al cliente de Line 6 Compatibilità del Software Line 6 con macOS 12 Monterey È stata testata la compatibilità delle seguenti applicazioni con macOS 12 Monterey, non è stato riscontrato nessun problema. Questo elenco verrà aggiornato con i nostri progressi su altre applicazioni in quanto testate e ritenute compatibili. Metallurgy Collection Helix Native Line 6 License Manager Line 6 Updater HX Edit Catalyst Edit POD Go Edit POD HD Edit POD HD Pro X Edit POD HD500 Edit POD HD500X Edit PowerCab Edit Spider V Remote Workbench HD Helix Hardware Driver POD Go Hardware Driver Audio-MIDI Driver 7.6.8 (TonePort/POD Studio/GuitarPort) Software Line 6 con compatibilità limitata con macOS 12 Monterey/Intel POD Farm 2.5 (Standalone/Plugin): Pod Farm funziona come standalone e come plug-in in Ableton (AU), Logic (AU), Reaper (AU) e Studio One (AU). Pod Farm non funziona come VST in Ableton, Cubase, Reaper e Studio One. Echo Farm 3.0: Echo Farm funziona in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) e Reaper (AU/VST). Echo Farm non funziona in Garageband (AU). Amp Farm 4.0: Amp Farm funziona in Pro Tools (AAX), Ableton (AU/VST), Cubase (VST), Logic (AU), Studio One (AU/VST) e Reaper (AU/VST). Amp Farm non funziona in Garageband (AU). Compatibilità hardware della linea 6 con macOS 12 Monterey I seguenti prodotti hardware sono stati testati per la compatibilità generale con macOS 12 Monterey in esecuzione su sistemi CPU Intel, senza che siano stati riscontrati problemi quando si utilizza il driver Line 6 più recente disponibile o il driver conforme alla classe macOS 12, a seconda dei casi. Questo elenco verrà aggiornato con i nostri progressi su altre applicazioni in quanto testate e ritenute compatibili. Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL HX Effects PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport Variax USB Interface Variax Invitiamo chiunque rilevi problemi con il nostro software a contattare il nostro staff di supporto su www.Line6.com/company/contact Lo Staff di Supporto Line 6
  5. What is the Metallurgy Collection? The MetallurgyTM Collection of amplifier and effects plugins was created specifically for guitarists who wish to quickly and easily access contemporary versions of classic and modern metal tones—as well as craft original tones of their own. The Collection bundles the Modern, Thrash, and Doom plugins, which are also available individually. The Metallurgy Collection plugins feature amplifier and effects models drawn from the award-winning HX® family of products. How many amp models per plugin? Each Metallurgy plugin features four amplifier models carefully chosen to deliver a full range of genre-specific tones. What kind of effects are included? Pre-amplifier Effects Each Metallurgy plugin features 3 (or more) mono. style-specific effects, as well as a polyphonic capo, that can be used before the amp in the signal chain. Post-amplifier Effects Each Metallurgy plugin features two stereo, style-specific effects that may be used after the amp in the signal chain. What about Cabinets, Microphones, and IRs? Each Metallurgy plugin features a choice of eight speaker cabinets and eight microphones, all based on IRs. Two mics may be selected and combined with a stereo room mic array, and up to two third-party Impulse Responses (IRs) may be substituted for the factory mics. Once you’ve logged in and authorized your Metallurgy software, IRs purchased from the Line 6 Marketplace on the same account will be made available in Metallurgy. Can I automate parameters in the Metallurgy Collection? Yes. Nearly every parameter in the Metallurgy Collection can be automated. Does the Metallurgy Collection support MIDI parameter control? Yes, nearly every parameter in the Metallurgy Collection can be controlled via MIDI CC. Is amp switching and amp bypassing via MIDI Learn or automation available? Switching channels via midi/automation is not available because the plugin would have to load the DSP of the alternate channel – which is essentially another model being loaded. Changing amp models in general is not supported via midi and automation. You can bypass an amp model and its DSP by disabling (bypassing) the amp view in the top toolbar. That also is not supported via midi learn or automation. There are other ways to bypass/mute that are midi/automation supported within the cab view’s mixer. Is the UI resizable? Not at launch. We’re working on it. Does the Metallurgy Collection support Retina displays (2x resolution)? Yes. The Metallurgy Collection includes Retina support. Is there Undo/Redo functionality? Yes, Undo/Redo is included at launch, along with A/B Compare. Does the Metallurgy Collection have a built-in tuner? Yes, it does include a chromatic tuner. Will there be a standalone version? Yes, each plugin includes standalone functionality. Are there any artist presets? Not at launch. System and Hardware Requirements for the Metallurgy Collection Mac Computers: Mac OS X 10.14 or newer Runs natively on Silicon M1 systems running macOS 11.0 Big Sur or newer 64-bit AAX Native, Audio Units (AU), VST3 host DAW software Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz Minimum Hardware Requirements Core i5 2.6GHz processor or faster 8GB of RAM 200MB of free disk space Internet connection required for initial license authorization and trial version Windows Computers: Windows 10 (64-bit only) or newer 64-bit AAX Native or VST3 host DAW software Supported Sample Rates: 44.1kHz, 48kHz, 88.2kHz, 96kHz Minimum Hardware Requirements Core i5 2.6GHz processor or faster 8GB of RAM 200MB of free disk space Internet connection required for initial license authorization and trial version Note: Standalone version running on Windows systems require use of an ASIO driver and interface What Digital Audio Workstations is the Metallurgy Collection compatible with? Supported Hosts The Metallurgy Collection has been tested and officially qualified against the DAW versions and plug-in formats below. If your DAW or DAW version is not listed below, we recommend trying the The Metallurgy Collection demo first to confirm compatibility. Your operating system must be compatible with your DAW for The Metallurgy Collection to work properly. Please refer to your DAW’s documentation for supported operating systems. Mac Pro Tools 2020, 2021, 2022 (AAX Native) Studio One Professional 5 (VST3, AU) Cubase 10.5, 11 (VST3) Ableton Live 11 (VST3) REAPER 6 (VST3, AU) Bitwig Studio 3 (VST3) Digital Performer 10 (AU) FL Studio 20 (AU) Logic Pro X 10.6.2 (AU) GarageBand 10 (AU) Windows Pro Tools 2020, 2021 (AAX Native) Studio One Professional 5 (VST3) Cubase 10.5, 11 (VST3) Ableton Live 11 (VST3) REAPER 6 (VST3) Bitwig Studio 3 (VST3) Digital Performer 10 (VST3) FL Studio 20 (VST3) Cakewalk by BandLab (VST3) Will The Metallurgy Collection work with iLok? There is no licensing available through iLok. Is there a demo version to try out? Yes. You can try before you buy! The free trial is fully functional for 15 days and is available at http://line6.com/software/. How can I purchase The Metallurgy Collection? The Metallurgy Collection can be purchased from http://shop.line6.com. I bought The Metallurgy Collection and I don't like it. Can I return it? The standard return policy is 15 days from the date of purchase. Contact Customer Service with a ticket at https://line6.com/company/contact/ to request a refund. How do I authorize the Metallurgy software on my computer? Download the latest version of the Metallurgy software at http://line6.com/software/ Run the Metallurgy software installer. We suggest you temporarily disable all third-party antivirus programs during installation. Follow the prompts and restart your computer if required. Launch your DAW, plugin host, or recording software, and insert the Metallurgy plugin into an audio track as an effect. (Note: the plugin may also be used via an aux bus.) Log in with the Line 6 account you used to purchase or activate the Metallurgy software. Click "Authorize This Computer" or the blue link displayed in the dialog. If you can't authorize your computer with the Metallurgy software, you may have exceeded the limit of authorized devices for your Line 6/YGG account. Visit https://line6.com/account/devices/ to de-authorize any unused devices to make room. You may also contact Customer Service at https://line6.com/company/contact/ to resolve authorization issues. How many computers can the Metallurgy Software be installed on with a single license? Licensing is tied to your Line 6 account. Up to four computers can share a single license simultaneously. Attempts to authorize a fifth computer will result in the Metallurgy software not responding. You'd need to deauthorize one of the previous four computers, then authorize the additional computer. How do I access third party IRs in the Metallurgy plugin? Drag IR files into your designated IR folder (Documents > Line 6 Metallurgy > Impulse Responses (Mac or Windows) and you will see them appear within the IR browser of all instances of your Metallurgy plugins and standalone apps. What are the exact amps and effects included in each plugin? Metallurgy: Modern Amps Vitriol Revv Generator Badonk Archetype Effects Rochester Comp Minotaur Caliper Drive Mod/Chorus Echo Dynamic Hall Reverb Metallurgy: Thrash Amps Rivet Clean Cali IV Placater Dirty Das Benzin Effects Throaty Wah Pillars OD Stupor OD 70s Chorus & Hot Springs reverb (Rivet Clean amp model only) Automatic Double Tracker Vintage Digital Delay Metallurgy: Doom Amps MOO)))N Mandarin Rocker Doom Mail Order Twin Effects Bighorn Fuzz Wringer Fuzz Vital Distortion Pebble Phaser Bias Trem & Hot Springs Reverb (included in the Mail Order Twin amp model only) Automatic Double Tracker Adriatic Delay
  6. Background Apple has recently pivoted away from using Intel-based CPUs with its computers, instead favoring the Apple Silicon processor, also known as the M1 Chip. Both Intel and Apple Silicon systems run on macOS 11.0 Big Sur. As it stands, some Line 6 products are not fully supported on computers using Apple Silicon processors, so we cannot offer technical support for those products installed on M1 systems at this time. We highly encourage you to check with the manufacturers' websites of your music system’s hardware and software for M1 compatibility. Workaround on M1 Systems NOTE: Any workarounds offered are not official solutions. Issues experienced with workarounds offered cannot be addressed until official support is offered. Starting with Big Sur macOS 11, Apple introduced Rosetta v2, which allows applications to run in an emulated mode. Rosetta runs automatically with our software that is NOT a plugin. To use Rosetta with our plugins, locate your DAW in the Applications folder. Use command ⌘+I and check the “Open in Rosetta” box. You may have to rescan your plugins afterwards. Testing Applications and plugins tested (latest versions) on M1 systems running macOS 11.0 Big Sur: Helix Native: working as expected on DAWs running under Rosetta Echo Farm 3.0: working as expected on DAWs running under Rosetta Amp Farm 4.0: working as expected on DAWs running under Rosetta POD Farm 2 (Plugin): working on DAWs running under Rosetta, but takes a few seconds to appear after adding an instance of the plugin POD Farm 2 (Standalone): working as expected Ampeg SVT Suite: working as expected on DAWs running under Rosetta HX Edit: working as expected POD Go Edit: working as expected Powercab Edit: working as expected POD HD500 Edit: App launched properly, device was unable to connect POD HD500X Edit: App launched properly, device was unable to connect POD Pro X Edit: App launched properly, device was unable to connect Spider Valve Mk II Edit: working as expected Spider V Remote: working as expected Spider IV Remote: working as expected Workbench HD: working as expected Line 6 FBV Control: working as expected Line 6 Updater: working as expected Line 6 License Manager: installs as expected, yet devices do not populate in Line 6 License Manager. There is currently an open bug for this issue. Tested and available: M1-compatible Hardware Audio Drivers for: Helix Helix LT Helix Rack HX Stomp HX Stomp XL POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X Hardware Audio Drivers for most TonePort/POD Studio products (see below for exceptions) Will not be updated to support Silicon-based systems: StageScape: Audio Driver POD X3: Audio Drivers, Editors, Updaters, Control Panel app and License Manager POD XT: Audio Drivers, Editors, Updaters, Control Panel app and License Manager TonePort UX8: Audio Drivers, Updaters, Control Panel app and License Manager TonePort/POD Studio KB37: Audio Drivers, Updaters, Control Panel app and License Manager POD HD300/400 Line 6 Monkey
  7. The table below covers supported Windows setups. Any other setups are not supported by us. OS Processor Supported Windows 7 Intel/AMD x64 Yes Windows 10 Intel/AMD x64 Yes Windows 11 Intel/AMD x64 Yes We're glad to say that all recent Line 6 software and Line 6 hardware drivers work with Windows 11: Helix family, HX family, AMPLIFi, Firehawk, Spider and Relay products. Plugins that have been covered are Helix Native, Amp Farm, Echo Farm 3 and Pod Farm 2 against the DAWs Cubase, Pro Tools, Ableton, Studio One and Reaper. The only outlier is regarding Variax not connecting in Workbench via the Variax USB interface. We will continue to test and report any update here. Testing Applications and plugins tested (latest versions) on PCs running Windows 11: Helix Native: working as expected on DAWs Echo Farm 3.0: working as expected on DAWs Amp Farm 4.0: working as expected on DAWs POD Farm 2 (Plugin): working as expected on DAWs POD Farm 2 (Standalone): working as expected Ampeg SVT Suite: working as expected on DAWs HX Edit: working as expected POD Go Edit: working as expected Powercab Edit: working as expected POD HD500 Edit: working as expected POD HD500X Edit: working as expected POD Pro X Edit: working as expected Spider Valve Mk II Edit: working as expected Spider V Remote: working as expected Spider IV Remote: working as expected Workbench HD: working as expected Line 6 FBV Control: working as expected Line 6 Updater: working as expected Line 6 License Manager: working as expected Drivers: The latest Hardware Audio Drivers for the following products work on Windows 11: Catalyst Helix Helix LT Helix Rack HX Stomp HX Stomp XL PowerCab family of products POD Go POD Go Wireless POD HD POD HD Pro POD HD Pro X POD HD500 POD HD500X POD HD300 POD HD400 Spider V family of products FBV3 Firehawk 1500/FX Relay family of products AMPLIFi family of products Mobile Keys Sonic Port VX POD Studio/Toneport StageScape M20d POD X3 family of products PODxt family of products Guitarport
  8. 日本語は下記をご覧ください Voir ci-dessous pour le Français Siehe unten für Deutsch Vea abajo para Español Vedi sotto per l'italiano Line 6 Software Compatibility With macOS 11 Big Sur The following applications have been tested for general compatibility with macOS 11 Big Sur running on Intel CPU systems, with no issues found. Helix Native HX Edit Line 6 License Manager Line 6 Updater Echo Farm Amp Farm Hardware Drivers FBV Control POD Farm 2.5 POD Go Edit POD HD Edit POD HD Pro Edit POD HD Pro X Edit POD HD300 Edit POD HD400 Edit POD HD500 Edit POD HD500X Edit Powercab Edit Spider IV Edit Spider V Remote Spider Valve MKII Edit Workbench HD Additionally, the Apple Silicon M1 chip compatibility KB article lives here. We encourage anyone having issues with our software to contact our support staff at www.Line6.com/company/contact. Line 6ソフトウェア製品のmacOS 11 Big Surとの互換性情報 以下のアプリケーションのmacOS 11 Big Surとの互換性を検証し、問題なく動作することを確認しています。 Helix Native HX Edit Line 6 License Manager Line 6 Updater Echo Farm Amp Farm Hardware Drivers POD Farm 2.5 POD Go Edit POD HD Edit POD HD Pro Edit POD HD Pro X Edit POD HD300 Edit POD HD400 Edit POD HD500 Edit POD HD500X Edit Powercab Edit Spider IV Edit Spider V Remote Spider Valve MKII Edit Workbench HD Line 6ソフトウェア製品との互換性で問題が生じている場合は、www.Line6.com/company/contactへアクセスし、サポートスタッフまでお問い合わせください。 Line 6サポートチーム Compatibilité des logiciels Line 6 avec macOS 11 Big Sur La compatibilité générale des applications suivantes a été testée avec macOS 11 Big Sur et aucun problème n’a été détecté. Helix Native HX Edit Line 6 License Manager Line 6 Updater Echo Farm Amp Farm Hardware Drivers POD Farm 2.5 POD Go Edit POD HD Edit POD HD Pro Edit POD HD Pro X Edit POD HD300 Edit POD HD400 Edit POD HD500 Edit POD HD500X Edit Powercab Edit Spider IV Edit Spider V Remote Spider Valve MKII Edit Workbench HD Nous invitons toute personne qui rencontrerait des problèmes avec nos logiciel à contacter notre service d’assistance à l’adresse www.Line6.com/company/contact. L’équipe d’assistance Line 6 Line 6-Software-Kompatibilität zu macOS 11 Big Sur Folgende Anwendungen wurden auf ihre allgemeine Kompatibilität zu macOS 11 Big Sur getestet. Dabei wurden keine Probleme festgestellt. Helix Native HX Edit Line 6 License Manager Line 6 Updater Echo Farm Amp Farm Hardware Drivers POD Farm 2.5 POD Go Edit POD HD Edit POD HD Pro Edit POD HD Pro X Edit POD HD300 Edit POD HD400 Edit POD HD500 Edit POD HD500X Edit Powercab Edit Spider IV Edit Spider V Remote Spider Valve MKII Edit Workbench HD Dennoch möchten wir alle Anwender, die Probleme mit unserer Software haben, bitten, sich unter www.Line6.com/company/contact an unsere Support-Abteilung zu wenden. Ihr Line 6 Support-Team Compatibilidad del software de Line 6 con macOS 11 Big Sur Se ha probado la compatibilidad general de las aplicaciones siguientes con macOS 11 Big Sur y no se han encontrado problemas. Helix Native HX Edit Line 6 License Manager Line 6 Updater Echo Farm Amp Farm Hardware Drivers POD Farm 2.5 POD Go Edit POD HD Edit POD HD Pro Edit POD HD Pro X Edit POD HD300 Edit POD HD400 Edit POD HD500 Edit POD HD500X Edit Powercab Edit Spider IV Edit Spider V Remote Spider Valve MKII Edit Workbench HD Si se presenta algún problema con nuestro software, lo invitamos a que se ponga en contacto con nuestro equipo de atención al cliente en www.Line6.com/company/contact. El equipo de atención al cliente de Line 6 Compatibilità del Software Line 6 con macOS 11 Big Sur È stata testata la compatibilità delle seguenti applicazioni con macOS 11 Big Sur, non è stato riscontrato nessun problema. Helix Native HX Edit Line 6 License Manager Line 6 Updater Echo Farm Amp Farm Hardware Drivers POD Farm 2.5 POD Go Edit POD HD Edit POD HD Pro Edit POD HD Pro X Edit POD HD300 Edit POD HD400 Edit POD HD500 Edit POD HD500X Edit Powercab Edit Spider IV Edit Spider V Remote Spider Valve MKII Edit Workbench HD Invitiamo chiunque rilevi problemi con il nostro software a contattare il nostro staff di supporto su www.Line6.com/company/contact Lo Staff di Supporto Line 6
  9. Q: How come my 4-button pedal says “9V AC” for Power Requirements, but the DC-DL4’s output is rated 12V DC? A: The DL4 was originally designed to be battery-powered (DC), or to optionally be powered by the Line 6 PX-2G power supply (which was a 9V AC output). Due to Level VI power supply efficiency requirements in North America, the PX-2G was discontinued in North America. However, the DL4, as well as the DM4, MM4, FM4 and AM4 stompboxes, can also work with a center-positive 12V DC supply, such as the DC-DL4 power supply.
  10. Hi everybody, I have a spider V, but i wanna buy any footswitch for it, and on the web I found some of second hand. I found: - Shortboard MK1 - Old floorboard - FBV express mk1 I believe those aren't incompatible with spider V, but these have the same connector what footswitch compatibles, Why are incompatible?
  11. Hi, I've bought a used JTV-69 and some weeks later I realised that not having the special usb cable/workbench interface is actually a problem.. anyway.. I was charging the battery with the original charger and now I lost it. I have plenty of Sony NP-F batteries (which I know will not work with the JTV) but my question is if I can use the generic charger to charge the Variax battery? Thanks in advance!
  12. G10T/G10TII LED States: Transmitter Green when in guitar: On Red flashing when in guitar: Less than 30 minutes battery life left Green when docked: Fully charged Green flashing when docked: Charging Red flashing when docked: Less than 30 minutes battery life left and charging Receiver White solid: On and connected to G10 transmitter OR charging docked G10 transmitter White flashing: No signal from G10 transmitter Red flashing: Less than 30 minutes battery life left on a transmitter that is in use and transmitting, and not for a transmitter that is docked/charging. It is possible that the receiver's LED halo will flash red under other conditions, such as if the transmitter is not properly docked. Q: What is different between the original G10T and the new G10TII transmitters? A: The most obvious difference may be that the original G10T is black in color, while the new G10TII is dark grey. The new G10TII also incorporates new battery management technology, resulting in up to 7 hours of runtime and 170 hours of standby time, compared with the original G10T on the latest version 1.06 firmware, with up to 6 hours of runtime and 150 hours of standby time. Additionally, the new G10TII is electrically compatible with instruments using active pickups and preamps, without the need for an adapter. Q: My G10T/G10TII transmitter was fully charged, but my G10S is now at a single red LED and I have not played for very long. What happened? A: If, after a full charge, the LEDs drop to a single red LED sooner than expected, the transmitter may continue to operate for a number of hours, depending on the condition of the battery. While variation exists between batteries, a red blinking LED will generally indicate 30 minutes or less of play time. Q. Why is my docked transmitter flashing green when I know it's fully charged? A. Once a transmitter reaches full charge when docked, the transmitter will begin to discharge at a trickle. Eventually, the transmitter will dip down to a threshold at which it charges again. At that point, the LED may begin to flash, indicating charging. This could be noticeable for a few seconds, or potentially longer, depending on the condition of the battery. Just as there will be variation from unit to unit with regard to battery performance, you may observe the interval at which that flashing occurs may vary from unit to unit. Transmitters that have been through many cycles or that have problematic batteries could have a diminished performance and might now be much closer to dipping down into that threshold when they trickle upon full charge, which could make that flashing LED state occur more frequently, where it might be more readily observable in those cases. Q: I inserted the transmitter into the receiver and let it charge for many hours, but the transmitter never fully charged. The transmitter and the receiver is constantly blinking red. Why? A: In some cases, the transmitter could stand to be updated using the Line 6 Updater program found at www.Line6.com/software. Please make sure you are using the latest version of Line 6 Updater. Otherwise, there's a chance that the transmitter was not seated completely into the receiver to start the charging process. Once the transmitter is correctly seated in the receiver, the receiver's LED halo will be a solid white, and the transmitter LED will flash green until fully charged, at which point the transmitter LED will be solid green. Please see the images below for examples. Here is a video that illustrates LED statuses: Q: How long does it take to charge the battery? A: On average, a new transmitter with its battery in a discharged state has given the following results when tested: 15 minutes of charging gives at least 30 minutes of run time 30 minutes of charging gives nearly 1 hours of run time 3 hours of charging (full charge) gives approximately 6 hours of run time for G10T, or 7 hours of run time for G10TII All rechargeable batteries gradually lose capacity, so eventually the run times will decrease. Q: Should I leave my fully-charged G10 transmitter in the receiver? A: The unit is designed for the transmitter to be plugged into the receiver to stay charged. Think of this much like you would a cordless phone. Always keep it docked if you can for good battery life. Not being docked will not damage the battery nor accelerate drainage. Q: What is the lifespan of the battery? A: After 300 full charging cycles, expect the battery to gradually lose capacity, the amount of which varies. Please keep in mind that there are many factors that can affect these numbers, such as temperature, humidity, etc. but not enough to significantly shorten the life span of the battery. Q: Does the G10T/G10TII transmitter fit all guitars? A: We have designed the G10 and G10TII transmitters to fit into almost any guitar. However, we anticipate that there will be some rare cases where the transmitter does not fit into a given guitar. If the G10 or G10TII transmitter is inserted into your guitar and the transmitter's actuator pin is not engaged, the transmitter will not turn on, the LED on the transmitter will not light up, and no signal is processed. We have found that a workaround to this issue is to use a mono-to-mono (TS-TS) Male to Female adaptor or cable. See this article for more details: Relay G10 Guitar Compatibility (Fit/Electronics) Q: Does the G10/G10TII transmitter work with older Variax guitars? A: Yes, but the fit is not exact. Please see this article for more details: Relay G10 compatibility with older Variax models Q: Does the G10 transmitter work with guitars that use active electronics? A: In some rare cases, the guitar's active electronics are wired with inverse polarity. In this scenario, the original G10TII transmitter's electronics can go into a protection mode that keeps the system from being functional. This is evidenced by no output from the receiver, even though the transmitter's light is on. The new G10TII is designed to be electrically compatible with instruments using active pickups and preamps, without the need for an adapter. Additionally, certain instruments may present a level of noise when their active circuitry is engaged and the transmitter is connected. We have found that in most cases, a workaround to this issue is to use a mono-to-mono (TS-TS) Male to Female adaptor or cable. See this article for more details: Relay G10 Guitar Compatibility (Fit/Electronics) Q: Does the G10/G10S system work with instruments other than guitar? A: We developed and tested G10 and G10Sfor guitar and bass, but in theory, these products will work with any instrument-level source. This is not to say that it will work with any instrument you try it with, based on the above guitar-compatibility answers, but we expect that most will find success, so you are welcome to try. Q: If you leave the transmitter plugged into a guitar, does it still use up battery life even if it's not being used? A: After 4 minutes of silence, the transmitter will go into sleep mode, and will come back on when audio is passed through it again. Q: I have a guitar with active pick-ups. Can I leave the transmitter plugged in without the guitar battery dying? A: The experience should not be any different than leaving a guitar cable plugged into the guitar, meaning the G10T or G10TII will shut off in four minutes if it doesn't detect a signal. We suggest turning your guitar down to 0 when not in use, as some guitars, even those without active pick-ups, can produce enough hum or noise to trick the transmitter into staying turned on. Note that with certain guitars that have active electronics, leaving a cable plugged in might drain the guitar's battery, so the same may happen with a G10T or G10TII left in the guitar. Q: What is the maximum input / output level for the Relay G10 and G10S? A: The G10T/G10TII transmitter's maximum input level is 6.5 Vpp (= 9.5 dBu). The outputs on the receivers are at unity, so they are the same. Q: What is the dynamic range for the Relay G10 and G10S? A: Both products feature a dynamic range of greater than 110 dBA when used with either the G10T or G10TII transmitter. Q: What is the frequency response for the Relay G10 and G10S? A: Both products have a response of 10 Hz - 20 kHz when used with either the G10T or G10TII transmitter. Q: What is the amount of latency for the Relay G10 and G10S? A: Both products have approximately 2.8 milliseconds of latency from input to output, when used with either the G10T or G10TII transmitter. Q: What is the input impedance for the G10T/G10TII? A: Greater than 1 MΩ for both transmitters. Q: What are the specs on the provided Relay G10 and G10S power supplies? A: For Relay G10: 5V 1.0A output, input of 100-240v. The Relay G10S includes the DC-1g, which is a 9V DC 0.5A output, input of 100-240v. Q: Will phantom power harm the G10 or G10S receiver? A: No, the receivers will not be harmed by phantom power. Q: At what temperatures can I charge my G10T/G10TII transmitter? A: The recommended charging temperature range of the G10T and G10TII transmitters is specified as 50° F to 86° F (10° C to 30° C). Q: At what temperatures can I operate my G10T/G10TII transmitter? A: The recommended operating temperature range of the G10T and G10TII transmitters is specified as 32° F to 122° F (0° C to 50° C). Q: What are the specs on the provided Relay G10 Series power supply? A: 5V 1.0A output, input of 100-240v Q: Will phantom power harm the G10 receiver? A: No, the G10 receiver will not be harmed by phantom power. Q: Where can I purchase a Relay G10 Series Wireless System or replacement/extra Relay G10 transmitters (G10T)? A: You can order them from any authorized dealer. Q: What type of cable do I need between my guitar & G10T/G10TII transmitter? A: None; it plugs directly into your guitar. Q: Can I use both the 1/4" output and the XLR output at the same time? A: Yes, they can both be used simultaneously. Q: What Cable Tone length is the G10/G10S set to? A: G10's Cable Tone is set to 10 feet on the 1/4" output only. The XLR output is full frequency range. These settings are not configurable. For the G10S, Cable Tone is switchable between Off (full frequency), 10 feet, and 30 feet. Q: What is the range of the G10/G10S? A: The G10 is 50 feet, line of sight, as local conditions allow. The G10S is 130 feet. Line of sight: As with our other wireless gear, be sure to have a visible line of sight with the receiver. To get the best performance out of the G10 or G10S, do not obstruct the receiver with other gear or electronics. Q: How does G10/G10S/G10T/G10TII interact with other wireless devices? A: If you are using G10/G10S/G10T/G10TII in a setup with other 2.4 GHz wireless devices, please make sure to switch on all other wireless devices first, allow them to initialize and set channels, then dock the G10T or G10TII transmitter into the receiver for at least 15 seconds so the system can select a free channel. When using several G10 or G10S systems, please start by docking the first transmitter in the receiver, wait 15 seconds, undock it and plug it into your instrument. Please make sure that it is on (green LED on the transmitter). Repeat this process with the subsequent units. Many Line 6 wireless devices can be set to different RF modes. All Line 6 wireless units in a setup need to utilize the same RF mode to avoid problems. Your G10/G10S/G10T/G10TII unit is always set to RF2, so make sure that any other Line 6 wireless devices in your setup are set to RF 2 mode. G70/75 units use RF3, which can coexist with RF2 for G10/G10S/G10T/G10TII , so long as you avoid using the same channel between them. Here's an article that shows how to switch RF modes: http://line6.com/support/page/kb/_/live-sound/relay-digital-wireless/rf1rf2-mode-switching-frequencies-r130 Q: Is the Relay G10/G10S transmitter (G10T/G10TII) compatible with the X2 receiver (or vice versa)? A: Both systems run in completely different frequency ranges so they are not compatible with each other. However, X2 and Relay units can be used on the same stage (along with any other analog wireless systems) with no problems. Q: Does USB 3.0 create interference in the 2.4GHz frequency range? A : USB 3.0 computer cables and peripherals, including hard drives, are known to emit radio frequency interference throughout the 2.4GHz band, which results in reduced range and/or performance for any 2.4GHz device in its proximity (including wireless keyboard or mouse, WiFi, etc.). We recommend placing any digital wireless receivers at least two meters away from the USB 3.0 device and its cabling. Below is a link to a study by Intel regarding this interference. http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb3-frequency-interference-paper.html Q: How do I register my Relay G10/G10S/G10T/G10TII System? A: You can register on your account: Gear Registration Dimensions - G10 Receiver: H 3.5"; W 4"; L 4" Transmitter: 2" long after inserted into instrument Total boxed weight: 3 lbs. Dimensions - G10S Receiver: H 2"; W 3.5"; L 5" Transmitter: 2" long after inserted into instrument Total boxed weight: 4 lbs.
  13. With a few exceptions, macOS 10.15 (Catalina) is supported by our currently active applications and drivers. Below is a detailed rundown of compatibility issues for Line 6 products on a case-by-case basis. If you run into any problems or have a question for us, please reach out via the Contacts page (https://line6.com/company/contact/). Editors: • All currently supported editors work as expected. • The following editors are no longer supported at this time and will not work on Catalina: Line 6 Edit Vyzex Backtrack Utility Updaters • Line 6 Updater works as expected. • Line 6 Monkey is not compatible with macOS 10.15 (Catalina). A solution for Catalina customers to update firmware is in-progress. Drivers • All currently supported drivers and devices work as expected except for the Helix custom driver. • Helix class compliant audio works as expected. • The Helix custom driver (which adds support for additional sample rates) does not yet work correctly. Plug-ins • Currently, Helix Native and POD Farm 2 work as expected on all supported DAWs, except Cubase, as there is no 64-bit VST version of POD Farm 2 for macOS. As DAWs are updated to adopt Apple’s latest requirements and security measures, our plug-ins may need to be updated to continue working with those DAWs. We will work with DAW vendors to update Helix Native and POD Farm 2, but we cannot guarantee that they will not release updates that break our compatibility. If you run into trouble installing our software under Catalina, please see this article: If you've updated to Catalina and you're having trouble with the software that we list in the article as working, it's likely you have a 32-bit version of those programs installed. Please uninstall them and then download the latest version of them, which will be 64-bit. We also have an article that describes how to run older OS versions in order to use discontinued software.
  14. POD Go is fully compatible with the Line 6 EX-1 and Mission Engineering's EP1-L6 external expression pedals. Other pedals may work with POD Go, although they may not be fully compatible or tested, such as the Dunlop DVP1XL. In some cases, the pedals internal dip switches may need to be adjusted to ensure proper polarity. If you experience trouble with inaccurate expression pedal swing, try adjusting any internal or external dip switches the pedal may have. Also note that any expression pedals that appear to work backwards can be set to work properly by setting Global Settings > Switches/Pedals > EXP 2 Polarity to “Inverted.”
  15. Table of Contents · General · Device Compatibility · Finding the AMPLIFi Remote App an Android device · Firmware updates · Streaming Music and Tone Searching/Matching · User Interface General Q: Are you really finally releasing AMPLIFi Remote for Android users? A: Yes, it's true! You asked, we delivered. Q: When will it be available? A: We released AMPLIFi Remote 2.0 on October 28th, 2014. You can check our website and follow us on twitter @line6 for the latest announcements. Q: Is AMPLIFi Remote 2.0 a free update? A: Yes. You can download AMPLIFi Remote 2.0 at no charge. Device Compatibility Q: Are there any functional changes to the AMPLIFi Remote App on Android? A: AMPLIFi Remote has no functional differences between iOS and Android. All the same features are available. Q: Which specific Android devices will be supported when AMPLIFi Remote 2.0 is released? A: Generally speaking, although not tested or qualified, nearly any Android phone, tablet or phablet should work, provided it is able to run the required Android OS version. AMPLIFi 150, 75, 30, TT and FX100 is known to be compatible with the following Android devices: · Samsung Galaxy S5 · Samsung Galaxy S4 · Samsung Galaxy S III · Samsung Galaxy Note Pro · Samsung Galaxy Note II · HTC One M8 · HTC One M7 · Motorola Moto X · Google Nexus 7 · Amazon Kindle Fire HDX · ASUS MeMo Pad · Asus Fonepad · ASUS PadFone · LG G2 · LG Optimus · LG F7 · LG Nexus 4 Q: Which Android OS versions are supported? A: AMPLIFi Remote 2.0 requires a device running Android OS version 4.2 or above, and built-in Bluetooth capability. Even if a device is not listed in the supported device list above, we encourage users to try AMPLIFi Remote on their device if it meets the minimum requirements. We will update this list as additional devices are found to have an optimal experience. Q: Why are you not qualifying earlier Android OS versions? A: The Android developer portal indicates that a majority of Android devices are on Android 4.2 or above. Customers with earlier Android OS versions should check with their carrier or device manufacturer to find out if there is an upgrade available for their device to get to Android 4.2 or above. Q: Does AMPLIFi Remote 2.0 support double-byte characters as metadata? A: Tones with double-byte character names and metadata are not currently supported for tone matching. Q: Can I use AMPLIFi Remote 2.0 on Android devices with customized UI on non-English OS, for instance Sony Xperia or Sharp Aquos? A: These devices are not specifically supported at this time, however we do feel that they would work, although will not be fully localized. Q: Is AMPLIFi Remote 2.0 compatible with Windows Phone / Tablets at this time? A: There is currently no plan to support for ARM or x86-based Windows phones/tablets. Q: Will the same app work on all AMPLIFi products? A: Yes, the AMPLIFi Remote App will work with any member of the AMPLIFi Device family. Q: Is AMPLIFi Remote 2.0 also available for iOS? A: Yes. AMPLIFi Remote 2.0 provides minor maintenance with the overall app, but mostly AMPLIFi Remote 2.0 is for Android support. Some customers with iOS devices will upgrade to AMPLIFi Remote 2.0 without any noticeable differences. Q: The AMPLIFi product box only has iOS compatible devices printed on it. Are there different versions of AMPLIFi hardware sold specifically for iOS and Android? A: No, there are not different hardware versions. Whichever AMPLIFi hardware you get will support both AMPLIFi for iOS and for Android. As long as you have the AMPLIFi Remote App 2.0 on a supported device, your AMPLIFi hardware will work. Finding the App on an Android Device Q: What is the name of the app and where can I download it? A: The app is called AMPLIFi Remote on Play Store (also referred to as Google Play Store) and the Amazon Store. Firmware Updates Q: Do I have to update the AMPLIFi device firmware for Android to work? How can I update the firmware without an iOS device? A: Yes. A firmware update (2.0) is required. We will be providing a Windows PC-based firmware Updater called AMPLIFi Utility at www.line6.com/software, which requires a USB connection to your AMPLIFi device. When customers open the AMPLIFi Remote app on their Android device for the first time, there is a slideshow that points the customer to the Line 6 website to update their AMPLIFi hardware. Customers will download a driver and update utility and should follow the instructions to update their specific AMPLIFi hardware. Once started, running the firmware update will take between 2 - 3 minutes. iOS users will be able to update their firmware as is typically done with iOS devices via Bluetooth from the AMPLIFi Remote App. Q: If I have to upgrade the firmware, will it stop working with iOS devices or will I be able to switch between both? A: The update simply adds a new way for AMPLIFi to communicate over Bluetooth, so it will continue to work with iOS devices as well. Q: Is this the first time the USB port is being used to update AMPLIFi firmware? A: Yes Streaming Music and Tone Searching/Matching Q: Which music libraries are supported on Android OS? A: The AMPLIFi Remote App can access music that stored locally on the device, or on external SD card storage, that has been transferred to the device from a computer. Please use the default method provided by your device manufacturer to store music onto your Android device. Q: What about songs I have purchased or downloaded from Google Play Store (aka Play Music)? A: In order to access music purchased from the Google Play Store (aka Play Music), we recommend that you download it to your computer and transfer it to your device. The AMPLIFi Remote App will not match the tones of music streaming from Google Play Store (Play Music). Q: What kind of audio file format does AMPLIFi Remote 2.0 support? A: .mp3, .m4a, .mp4, .acc, .3gp, .flac. Formats that use id3 tags can be used for tone matching. Q: How does the AMPLIFi Remote App match tones? OR From where does AMPLIFi Remote App match tones? A: If your music is properly tagged with Artist, Album, and Song Titles, the Line 6 servers compare and sort publicly shared tones that match that particular song. Q: Can I edit tones on my computer using AMPLIFi Remote 2.0? A: No. At this time you cannot edit tones on a computer using the AMPLIFi Remote App. Q: What connectivity is required to play back music and tone searching and matching? A: A Bluetooth connection is required for streaming and editing. WiFi or Cellular Data is used for cloud-based features such as accessing Tone Searching and Tone Matching. Although, you will be able to access editing and manage your device-stored presets while offline. User Interface Q: Will the AMPLIFi Remote 2.0 GUI look the same on an Android device as on iOS devices? A: AMPLIFi Remote has been developed natively for Android using Java, so there are some very subtle differences. Q: How will the AMPLIFi Remote 2.0 GUI scale onto the different size screens? A: We've designed it to adjust spacing and scaling for lots of various screen sizes and pixel depths.
  16. All 3rd generation Line 6 digital wireless transmitters and receivers are designed to be cross-compatible with each other. For example, the six-channel Relay G30 transmitter will work on channels 1 through 6 of the XD-V75 receiver. The units in question must be on the same RF mode (RF1 or RF2). 3rd generation products include G30, G50, G55, G90 and XD-V 35, XD-V 55, XD-V 70 and XD-V 75.
  17. Some Android mobile devices do not fully support "USB Host mode", which is required for the Spider V Remote app to communicate with Spider V amplifiers. We have found that a free third party utility app called "USB Host Diagnostics" reliably identifies potential issues with USB Host mode support. This tutorial will guide you through the process. Access the Google Play store and search for "USB Host Diagnostics" made by a developer called "Chainfire". The app is offered free of charge. Download and install it. Launch "USB Host Diagnostics". The screen should look like this: Locate the "Start diagnostics" text and tap it to start. The app will ask you to disconnect USB devices. Disconnect any USB devices and click the OK button. The diagnostic process will start and the app will ask you to connect a USB device such as a laptop or a USB thumb drive. After a few seconds the process completes and you will be asked to upload results. Uploading is appreciated, but not necessary. On the final screen you will be able to see the test results. Scroll down to locate the "Verdict" section. In order for your Android device to work with Spider V, "OS" must report "Yes", and "3rd party apps" must report "Full".
  18. Hi guys, I just brought a new Mac book air and also line 6 pod farm. I tried to install the cd to the Mac and it says it needs Mac OS X 10.5 or above. But the one I have is 10.13.5. I don't understand the issue. can anyone help me with this? Why I am facing problem to download and install from the cd? Is this Mac I have not compatible with pod farm ? Please help.Thank you.
  19. Loving my HX Effects unit so much. It would be even better if I could use a toe switch expression pedal with the unit, so I could naturally turn a wah on and off with that like the real pedal. Why is this not compatible, and could it be made compatible with a future firmware update? Fingers crossed.
  20. I own a line 6 spider iv 15 combo, im thinking of bying a Boss Gt-10. Does the gt-10 is compatible with the amp and how i connect it? (Sorry for bad english)
  21. Apple’s iOS 10 and watchOS 3 are being released to the public today. Our testing with these new operating systems has shown that all of our software and hardware are working as expected with these systems. Two notes to be aware of: On the first run of Stagescape Remote or MIDI Memo Recorder, a dialog will be displayed stating that this application has not been optimized and may have slow performance. This is an Apple message which occurs because of the age of these apps. In our testing, these apps perform well in iOS 10. iOS 10 drops support for all 30-pin devices. So, MIDI Mobilizer, MIDI Mobilizer II and MobileIn are no longer supported. Here is a list of iOS devices which are no longer supported beginning with iOS 10: -iPhone 4s -iPad 2 -iPad 3 -iPad Mini 1 -iPod touch (5th Generation)
  22. I notice on the download page, if I filter by HD 400 - nearly 80 % of the patches are from HD 300 devices. I hope this isn't too stupid of a question, and I couldn't find within forums...If I have the HD 400, do I have to download the HD 300 drivers in order to use within my HD 400 - are they compatible or not? In other words, can I download HD 300 sounds to be used on my HD 400 if I have the drivers loaded? thx K
  23. Alright, I have a question hopefully someone can answer. I own a Line 6 Spider Jam amp and i want to make better use of the recording function by going hands-free. If i bought the fbv express mk2 would i be able to control my recording (start, stop, overdub)? via the footpedals or is that only possible on the fbv shortboard? Thanks Ben
  24. I had a IMac, digidesign protools mbox, and KB37 with toneport gearbox for several years now. My IMac crashed, lost all my songs, and info is un-retrievable. So.. I bought a Presonus audio box with studio one and a new PC with windows7 32 bit I want to continue using my KB37 but it's several years old, it has the old version of gearbox before pod farm came out. Is there anyway to get this thing compatible with windows 7 and upgrade to podfarm? I loved the sound I got with the toneport and how easy it was to get a nice sound. I'm pretty tec dumb so any help would be greatly appreciated. So in short, I have an old KB37 circa 2008 or 2009, I would love to update to work with studio one on windows 7. Or am I out of luck? Thank you for any responses
  25. The main features of the Spider III amplifier can be controlled by connecting an FBV Shortboard MKII. Q: What type of cables are used with the Line 6 FBV Shortboard MKII? A: The Line 6 FBV Shortboard MKII uses a standard CAT-5/6 cable with standard RJ-45 ends. These cables are very common in data connection and can be found in most local computer outlets. The FBV controllers ship with a black 25' cable included in the box. Please see the chart below that details what each switch controls on the Spider III amplifier.
×
×
  • Create New...