lordalladin Posted September 15, 2015 Share Posted September 15, 2015 This may be a stupid question, but if you are using the magnetic pickups of the variax and change to a patch on the Helix that calls for say Sitar, does the Helix switch off the magnetic pickups and switch on the modelling voices? Or does the modelling section of the variax have to be active? Quote Link to comment Share on other sites More sharing options...
silverhead Posted September 15, 2015 Share Posted September 15, 2015 It will work as you describe if the Variax is connected via VDI and your preset is properly configured for Variax control. Quote Link to comment Share on other sites More sharing options...
Leftzilla Posted September 15, 2015 Share Posted September 15, 2015 I would imagine that they would keep the capabilities that the HD500 had at a minimum, though I can't see how much more control you could have over that. But thats just me. Quote Link to comment Share on other sites More sharing options...
stevekc Posted September 15, 2015 Share Posted September 15, 2015 Read Helix as USB<>VDI Interface for JTV Variax Workbench HD Editor? Will this work? ( as it currently does with HD-500X) ?? http://line6.com/support/topic/15451-helix-as-usbvdi-interface-for-jtv-variax-workbench-hd-editor/?do=findComment&comment=113303 Quote Link to comment Share on other sites More sharing options...
Rewolf48 Posted September 15, 2015 Share Posted September 15, 2015 There is an ideascale about enhanced functions such as being able to use a Helix Switch to change JTV Patch (really useful for me where I need to change to a completely different model for just 6 notes and then back again - currently just about do it with a custom bank, but I really don't have the time to do the pickup switch), and also to control JTV Volume or Tone via Helix Expression or Switches or even to control Alternate Tunings. Add your votes here: http://line6.ideascale.com/a/dtd/HD500-Helix-Control-of-Variax-Parameters/728102-23508 Quote Link to comment Share on other sites More sharing options...
cruisinon2 Posted September 15, 2015 Share Posted September 15, 2015 On 9/15/2015 at 6:59 PM, Rewolf48 said: There is an ideascale about enhanced functions such as being able to use a Helix Switch to change JTV Patch (really useful for me where I need to change to a completely different model for just 6 notes and then back again - currently just about do it with a custom bank, but I really don't have the time to do the pickup switch), and also to control JTV Volume or Tone via Helix Expression or Switches or even to control Alternate Tunings. Add your votes here: http://line6.ideascale.com/a/dtd/HD500-Helix-Control-of-Variax-Parameters/728102-23508 Just for my own morbid curiosity...which six notes? ;) Quote Link to comment Share on other sites More sharing options...
lordalladin Posted September 16, 2015 Author Share Posted September 16, 2015 The other question I have about Helix/Variax is what parameters can the Helix control on the Variax? Quote Link to comment Share on other sites More sharing options...
Digital_Igloo Posted September 16, 2015 Share Posted September 16, 2015 On 9/16/2015 at 7:49 AM, lordalladin said: The other question I have about Helix/Variax is what parameters can the Helix control on the Variax? Variax model, volume, tone, per-string tuning, and mag/model selection/routing can all be set and recalled per Helix preset. What's even cooler is how Variax's volume and tone knobs can control dozens of parameters in Helix and even send MIDI CC or CV to external gear. So you could literally control vintage (pre-MIDI) pedals and synths from your guitar. 1 Quote Link to comment Share on other sites More sharing options...
Rewolf48 Posted September 16, 2015 Share Posted September 16, 2015 On 9/15/2015 at 8:32 PM, cruisinon2 said: Just for my own morbid curiosity...which six notes? ;) Well you did ask... :P It is a short lead line that uses a full bodied woody tone neck pickup from one of the Semi models with the tone rolled down a bit between the verse and chorus which are finger picked arppegio sparkly edge of breakup Strat between pickups sound. It just doesn't work properly using a strat pickup except perhaps the neck pickup with the the tone knob rolled right back, but that lacks "character" and I can't switch pickups and change the tone knob setting in time (I can barely change the pickup position) and I can't change patches because I need the delay trails behind it. The notes are simply C D C D G A but only notes 1, 4 and 5 are plucked with 2 and 3 being hammer on and off and I slide into 6. And I did tell a small porkie-pie, because I actually play it twice each time. The idea of a momentarily switch that switches to a different guitar (and effects) using a toe switch is just a brilliant concept and I want it now! 1 Quote Link to comment Share on other sites More sharing options...
toasterdude Posted September 20, 2015 Share Posted September 20, 2015 On 9/16/2015 at 8:34 AM, Digital_Igloo said: Variax model, volume, tone, per-string tuning, and mag/model selection/routing can all be set and recalled per Helix preset. What's even cooler is how Variax's volume and tone knobs can control dozens of parameters in Helix and even send MIDI CC or CV to external gear. So you could literally control vintage (pre-MIDI) pedals and synths from your guitar. No effin way!! I had posted a request for sending midi CC to external devices on ideascale and nobody understood why that would be awesome. Some even voted no. Glad you guys get how cool that is. I can use volume knob on variax to adjust gain on my Axe Fxs? Too cool. 1 Quote Link to comment Share on other sites More sharing options...
toasterdude Posted September 20, 2015 Share Posted September 20, 2015 On 9/16/2015 at 12:23 PM, Rewolf48 said: Well you did ask... :P It is a short lead line that uses a full bodied woody tone neck pickup from one of the Semi models with the tone rolled down a bit between the verse and chorus which are finger picked arppegio sparkly edge of breakup Strat between pickups sound. It just doesn't work properly using a strat pickup except perhaps the neck pickup with the the tone knob rolled right back, but that lacks "character" and I can't switch pickups and change the tone knob setting in time (I can barely change the pickup position) and I can't change patches because I need the delay trails behind it. The notes are simply C D C D G A but only notes 1, 4 and 5 are plucked with 2 and 3 being hammer on and off and I slide into 6. And I did tell a small porkie-pie, because I actually play it twice each time. The idea of a momentarily switch that switches to a different guitar (and effects) using a toe switch is just a brilliant concept and I want it now! I have been asking for that feature for years. That will also allow changing tuning within a preset. Have a slide solo in open G, but rest of song is in standard and just a standard strat? Could be done in theory. Come to think about it, having 8 variax, 2 POD HD Pros, HD bean, had HD500x but sold to replace with Helix. . .how the hell am i not a beta tester? lol Quote Link to comment Share on other sites More sharing options...
Rewolf48 Posted September 20, 2015 Share Posted September 20, 2015 On 9/20/2015 at 12:46 AM, toasterdude said: but sold to replace with Helix. . .how the hell am i not a beta tester? lol Unfortunately the truth will be that despite LIne 6's best efforts all early adopters will still be beta testers, but they will have paid for the privilege. It is just that the technology is so complex. Quote Link to comment Share on other sites More sharing options...
toasterdude Posted September 22, 2015 Share Posted September 22, 2015 On 9/20/2015 at 8:24 AM, Rewolf48 said: Unfortunately the truth will be that despite LIne 6's best efforts all early adopters will still be beta testers, but they will have paid for the privilege. It is just that the technology is so complex. Not a problem. I have plenty of other options besides Helix. With Variax I have 8, so who better to try new FW and be able to compare? Test JTV69 vs 59 etc. If it costs me a bottle of Bourbon so be it . . . lol. . Quote Link to comment Share on other sites More sharing options...
chillbillyscott Posted February 7, 2016 Share Posted February 7, 2016 I'm trying to get my JTV69 to control Helix delay mix levels with the tone knob. I am able to assign the tone knob as the controller on the JTV and I am saving the preset. Then when I change to another JTV model, the tone knob begins acting like a traditional tone knob and also controls the delay mix. What am I doing wrong? I want to be able to control delay mix levels with the JTV tone knob using a single Helix patch, and be able to switch between several JTV models....thanks for your help.... Quote Link to comment Share on other sites More sharing options...
phil_m Posted February 7, 2016 Share Posted February 7, 2016 On 2/7/2016 at 12:08 AM, chillbillyscott said: I'm trying to get my JTV69 to control Helix delay mix levels with the tone knob. I am able to assign the tone knob as the controller on the JTV and I am saving the preset. Then when I change to another JTV model, the tone knob begins acting like a traditional tone knob and also controls the delay mix. What am I doing wrong? I want to be able to control delay mix levels with the JTV tone knob using a single Helix patch, and be able to switch between several JTV models....thanks for your help.... Turning the model knob on the Variax unlocks the tone and volume knobs on the Variax, so they revert to their normal function. I guess the workaround right now is have a separate preset for each Variax model you're planning using. Quote Link to comment Share on other sites More sharing options...
chillbillyscott Posted February 7, 2016 Share Posted February 7, 2016 Thanks Phil_m Quote Link to comment Share on other sites More sharing options...
chillbillyscott Posted February 7, 2016 Share Posted February 7, 2016 Will the tone control assignment on the JTV and helix save in the helix patch, or will I need to assign the tone knob as a controller each time? Quote Link to comment Share on other sites More sharing options...
phil_m Posted February 7, 2016 Share Posted February 7, 2016 On 2/7/2016 at 1:14 AM, chillbillyscott said: Will the tone control assignment on the JTV and helix save in the helix patch, or will I need to assign the tone knob as a controller each time? If you just re-save the existing patch, your controller assignments will remain. You won't have to reset them in each patch. Quote Link to comment Share on other sites More sharing options...
chillbillyscott Posted February 7, 2016 Share Posted February 7, 2016 Thx Quote Link to comment Share on other sites More sharing options...
xavierb Posted February 8, 2016 Share Posted February 8, 2016 On 2/7/2016 at 1:07 AM, phil_m said: Turning the model knob on the Variax unlocks the tone and volume knobs on the Variax, so they revert to their normal function. I guess the workaround right now is have a separate preset for each Variax model you're planning using. I think it's a bug, here's my ideascale entry to fix it - it drives me nuts as I like to switch pickups during from one solo part to another, but it doesn't seem that it bothers enough people, I only got 7 votes so far :( Quote Link to comment Share on other sites More sharing options...
silverhead Posted February 8, 2016 Share Posted February 8, 2016 On 2/8/2016 at 12:48 PM, xavierb said: ..... I like to switch pickups .... I am not able to test this at the moment but I think you can move the pickup selector switch without affecting the Vol/Tone knob controller assignment. Changing models by turning the Model Select knob removes the controller assignments. Quote Link to comment Share on other sites More sharing options...
xavierb Posted February 8, 2016 Share Posted February 8, 2016 Nope you can't... changing models I would be OK with, the pickup selector resetting the tone/volume control to be tone/volume controls is what sucks. Preset Variax Lock Control is set to "Tone Knob" - as soon as I change the pickup selector (also happens with the model selector, but that's OK I suppose) the tone "resets" to being a tone control. Same thing with the volume knob. I'm a JTV89F user, Helix is running the 1.06 firmware. Quote Link to comment Share on other sites More sharing options...
phil_m Posted February 8, 2016 Share Posted February 8, 2016 On 2/8/2016 at 12:48 PM, xavierb said: I think it's a bug, here's my ideascale entry to fix it - it drives me nuts as I like to switch pickups during from one solo part to another, but it doesn't seem that it bothers enough people, I only got 7 votes so far :( The way the manual is written, it does sound like it is maybe the intent that the knobs should remain locked when the toggle switch is moved, although, it's not entirely clear. It is clear that turning the model knob unlucks the tone and volume knobs, though. I think it would be a nice feature to at least have the toggle switch available to be moved without unlocking the knobs, though. Quote Link to comment Share on other sites More sharing options...
silverhead Posted February 8, 2016 Share Posted February 8, 2016 Curious. I'm experimenting with this right now using my JTV-59. On my Helix Rack* device the Vol/Tone knob controller assignments are only removed when I change models using the Model Selector knob. Moving the pickup selector switch does not affect the knobs as controllers; they remain locked. My Variax Settings is Per Preset. The Preset Variax Lock Control is set to Volume+Tone, but I also tested with just the Tone knob. Save the preset. Move to another preset then recall the original preset. When I move the pickup selector switch the only thing that changes is the pickups. Moving the knobs has no effect on Vol/Tone. When I rotate the Model Selector switch the knobs suddenly control Vol/Tone again although the display still says they are locked. I expect (most of) the above behaviour is as designed. I think there's a small bug in that the Lock Control display should change to read Unlocked (matching the behaviour) when the model selector knob is rotated. * My rack device is running firmware v 1.02.2. However, the release notes for this version (available in the Downloads section) make no mention of any changes in this behavior so I assume it is the same in the latest Helix floorboard firmware. Quote Link to comment Share on other sites More sharing options...
phil_m Posted February 8, 2016 Share Posted February 8, 2016 On 2/8/2016 at 4:32 PM, silverhead said: Curious. I'm experimenting with this right now using my JTV-59. On my Helix Rack* device the Vol/Tone knob controller assignments are only removed when I change models using the Model Selector knob. Moving the pickup selector switch doers not affect the knobs controllers; they remain locked. My Variax Settings is Per Preset. The Preset Variax Lock Control is set to Volume+Tone, but I also tested with just the Tone knob. Save the preset. Move to another preset then recall the original preset. When I move the pickup selector switch the only thing that changes is the pickups. Moving the knobs has no effect on Vol/Tone. When I rotate the Model Selector switch the knobs suddenly control Vol/Tone again although the display still says they are locked. I expect (most of) the above behaviour is as designed. I think there's a small bug in that the Lock Control display should change to read Unlocked (matching the behaviour) when the model selector knob is rotated. * My rack device is running firmware v 1.02.2. However, the release notes for this version (available in the Downloads section) make no mention of any changes in this behavior so I assume it is the same in the latest Helix floorboard firmware. Interesting... I haven't tried yet myself. It is very clear in the manual that the knobs become unlocked when you turn the model knob, so that's definitely not a bug. Perhaps the pickup selector behavior was changed without any fanfare. Quote Link to comment Share on other sites More sharing options...
slicbald Posted February 8, 2016 Share Posted February 8, 2016 Very interesting. I just got my JTV69 from Line 6 Ebay store and really have no idea how it integrates with my Helix, but I would like to learn more. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.