psarkissian

Typically, a solder point or two. Early 2012 build, so a couple of solder points on the 3-way switch may be oxidizing after 12 years. Recommend an authorized service center in your area or log a support ticket like silverhead suggested.

Excellent.

Power tubes are matched pairs? Could be the 12AX7 pre amp tubes are getting old as well. Old heater element in a pre amp tube can a reason. Something else,... have it checked out by a Line 6 authorized service center in your area.

On a JTV, Standard or Shuriken? Yes. Kevin Cadogin of Third Eye Blind does that with the 5-way toggle switch on his two tone orange JTV-69.

Tyler is not involved in the set-up specs. His guitar set-ups would be slightly different as they don't use piezos in conjunction with magnetic pick-ups. We don't publish it because too many people keep messing it up. Check the Knowledge Base section of the Forum.

As far as I know, they come in just one length.

It's okay,... sometimes I forget too,... and I'm the guy here at Line 6 that services these things. (LOL)

It will run on Windows 11, what are you running?

"... the battery used in the JTV's are standard camcorder batteries,... ", No, they are not standard camcorder batteries. Li-Ion yes. Using the current control circuitry to our specifications,... NOT some camcorder maker's specs. Use the specified parts, I've had nothing but trouble with Variaxes using 3rd party power.

Thumbs up.

Then there is something else going on there that should be checked out by an authorized service center in your area that knows Variax guitars. https://line6.com/find/service_center/

Active circuit guitars use TRS (tip= signal, ring= +Vdc, sleeve= return), been that way since at least the 1970's (when I started dealing with active circuit guitars).

:)

Also a good idea to us 1/4" TRS plug guitar cables.

Line 6 Central does connect to Variax now.

VDI cable impedance is consistent, 1/4" TRS cable impedance can vary some between different makers.

Probably needs a set-up, hasn't been service in some time. Pick-up height, worn string nut, couple other things are typical of the quack sound. Doubt it's wiring, that would sound different. But good deduction though.

No, the insides are not the same.

Early 2016. Yamaha plant, Indonesia.

Just checked, necks for JTV-89 or JTV-89F,... none in stock.

Register your guitar in your account, then log a support ticket. Also, check with Line 6 authorized service i your area. https://line6.com/find/service_center/

I hoped as much.

Make certain the board is cleaned. Capacitor electrolyte is conductive, can short out other components.

Either an amp IC failed, or an intermittent solder point on the processor board (crackling being digital noise). Find an authorized service center and have them check it out. https://line6.com/find/service_center/

3.71,... very good. Try using a Google or Firefox browser, and open Monkey using that,... if you aren't already.