-
Posts
143 -
Joined
-
Last visited
Everything posted by JeffersteinVS
-
Is it still best practice to leave the speakers at half moon when using a non l6 link and a different mixer ?(venues still a proud owner of the m20d but need more inputs on this gig) I imagine using p.a reference and monitor eq curves are still ideal as well as enabling feed back suppression on the speakers them self since the x32 does not provide that. thank you for any assistance!
-
Right output volume loss on M20d
JeffersteinVS replied to middi201's topic in StageScape Mixer / StageSource Speakers
I did the above ground mod this weekend and my issues with the headphone jack cutting out seems to have been fixed. I also replaced monitor out d and right out male xlr ports due to the cheap switch wheel popping off and failing. I will update you guy with more info once I use the board more this week -
Which Apple Airport Express
JeffersteinVS replied to HardyKefes's topic in StageScape Mixer / StageSource Speakers
DO NOT get a apple express! get a belkin n600 or a netgearn600 they have the option of completely disabling the 2.4 ghz signal and using ONLY 5ghz! then you will be smooth sailing... no more interference! -
L2t Vibration And Rattling.... Noise
JeffersteinVS replied to tudscamp's topic in StageScape Mixer / StageSource Speakers
has anyone who received the repair taken a look at what they changed? is it just a fan swap? I do not have any reputable repair company's in my area but I am more then qualified to order say a 80mm pc fan and swap it out if that's the case -
XD-V70 Replacement Capsules
JeffersteinVS replied to RichG's topic in XD-V Digital Wireless Microphones
I can confirm my xdv 75 works fine with the HEil RC35 capsule (no mods needed) -
Oddly enough during my tests last night I experienced more drop outs via RF1. RF2 was solid in my tests. I have 2 xdv75 and one G30 on channells 1, 2 and 4. all confirmed running on RF1 during tests.
-
Dboomer are you sugessting rf1 mode is the best option for the l6 devices? most places have wifi these days. Rf1 will not effect a true 5ghz wifi correct?
-
xdv-75 and airportexpress best placement
JeffersteinVS replied to JeffersteinVS's topic in XD-V Digital Wireless Microphones
As always thank you dboomer for your response! I noticed with the Belkin 600 you must disable the 2.4 but also make sure you disable the guest access. I was still having issues and then I used a Wi-Fi sniffer to discover "Belkin guest running at 2.4 still! Disabled that and now I have no interference and it is right next to the xdv75! -
Rf1/rf2 Explained (video)
JeffersteinVS replied to dboomer's topic in XD-V Digital Wireless Microphones
Great video. Do I need to follow the 4 to 1 ratio with a belkin 600 that is only broadcasting 5ghz? -
Headphones out crackles and disappears
JeffersteinVS replied to nielsniels's topic in StageScape Mixer / StageSource Speakers
I also experience this issue -
what i ended up doing to not utilize a aux send was I made up a 1/4 to xlr male cable and used the headphone jack on the m20d mixer to feed a mono left signal of the main mix to the house P.A mixer so they could broadcast the band to the outside speakers. worked well and gave me the ability to use all 4 monitor mixs for monitors.
-
I was having this issue as well. It is almost definitly a cable rattling out of the l6 link. What i did was I swapped the connecters on my AES cables to 90 degree xlr connectors. what that did for me was gave me the ability to secure the cables tight to the speakers with either some gaffers tape or i created a velcro system. the bigg culprit is often the monitors since they are fighting gravity
-
vocal compression ratio live
JeffersteinVS posted a topic in StageScape Mixer / StageSource Speakers
What vocal compression ratio do you recommend live with the dream stage setup? i know gain before feedback is a issue and wondering what people are using. thanks in advance -
HD500x freezing with opto tremlo I have recreated the patch by scratch , but everynow and them my hd500x will freeeze when i use a patch with the opto tremlo effect. sound will continue but anytime i hit a button on the pod it just lights up and doesnt change patchs or activate/deactivate effects. anyone else have issues like these?
-
Extra Expression Pedal - what do you program it to do?
JeffersteinVS replied to ColonelForbin's topic in POD HD
you still only get exp1 and exp2 as options so all i really could do with mine that was useful was use the expansion pedal as volume , use the built in as a wah and activate that wah with the toe switch on the hd500 built in pedal. I wanted to program the exp pedal to control delay time but it doesnt act as a third pedal