Jump to content

specracer986

Members
  • Content Count

    557
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by specracer986

  1. I don't have a 59, but my 69 measures 36.5mm. I guess string gauge would affect the measurement. Mine has 9.5/44's on it.
  2. When I had the two JTV's at the same time, I was using my first FRFR with my Helix, a DXR12. This was before high and low cuts became common knowledge, and I was fighting high end sizzle and artifacts. The maple neck JTV seemed to exacerbate the problem more than the mahogany neck JTV did. It wasn't a huge difference, but every time I would A/B them back to back with the same patch and settings, the maple neck would seem a little brighter. This was always using the same strings and a Variax sim, not the mag pickups. The only other difference between the two guitars was the maple neck was a short Gibson 24 3/4" scale length. I don't know if the scale length had any effect on the tone. Anyway, I sold the maple neck JTV and kept the mahogany neck sunburst. That neck is a standard thin profile and still feels really good in my hand. Plus I like the bubinga fretboard. Before you change necks, you should experiment with strings, because they do make a difference, especially if you changed brands as well as gauge. I remember that the stock neck had very nice acoustic tone and good sustain. It was just a little too bulky for me. Good luck.
  3. I had three JTV's at the same time. I only kept the JTV69 with the mahogany / bubinga neck. I sold the JTV69S with the short scale, maple neck. I decided the short scale wasn't doing anything for me. There was a noticeable difference in tone between the maple and mahogany neck, and I decided I liked the mahogany better. The earvana nut is something that doesn't make a huge difference, but every bit helps. So when ever I have the opportunity, I choose to use one. Both guitars that I now have with them are very stable. They both have a trem which I use a lot, but they hold their tune very well. My only negative on the Warmoth necks is I would never order a "Modern" again. I had the Gotoh side adjuster crack on one, which left me having to remove the neck to make truss rod adjustments. Not exactly modern. If I order another Warmoth neck it will be a "Vintage / Modern". Here's a photo of my two JTV 69's, while I had them.
  4. Yes. Thanks. I've been lucky and never really had an update problem.
  5. On the left column I was selecting Helix, middle column Helix Native, right column my OS. Only a link to Native 1.0 would come up. Seems a little screwy to me. But, thanks. I think I had the same problem last update. I'll try remember for next time.
  6. When I go to the L6 site and search for Native download, it only comes up with 1.0. I can't find 1.92. Could someone enlighten me.
  7. The modeling will work with a regular guitar cable. You can't connect to HD Workbench, or update any of the models without a VDI cable. Also, you can't make your JTV talk to a Helix and change with the patches.
  8. The fact that this sale includes significantly reduced U.S. Tyler's that aren't refurbished, tells me that they're looking to clear out the old.
  9. You'll never get confirmation of this from anyone. But sooner or later they will either release a new Variax model, or let the whole thing die. I'm guessing this is a good sign that they aren't going to let Variax die. But who knows how long it might be before we actually see a new model and whether it will shake up the segment or just be more of the same old? My JTV69 was my #1 guitar for about two years. It now hasn't been played for about a year. So I'm ripe to see a new model.
  10. The Stomp has completely different factory presets than Helix floor does, because the Stomp only has six blocks and holds a lot fewer presets than the floor.
  11. You don't have to worry about the hole placement hitting anything. But, I bought two Warmoth necks with the side adjusting Gotoh box and I won't buy another. I managed to crack the one adjusting box, with very little effort, making it useless. So after that I had to remove the neck to make adjustments. The Gotoh box is made of pot metal and not very sturdy, IMO. My next Warmoth neck will have the truss rod adjustment at the headstock.
  12. Are you sending a hot enough signal into the PC to keep the LED light green / orange? That's the first mistake we all seem to make. The PC needs to have a strong signal or it won't sound right.
  13. There are a lot of cab options to play with and if you don't like any of the cabs then you can dive into IR's to send to FOH. I don't know why the cabs sound "ratty" to you. Are you sure you're not sending too strong of a signal to the PC? If the led is constantly flashing red, then you're overdriving the input. I don't get a "crackling" noise with the L6 cable.
  14. I thought I would add that Freeman has some patches that have chord pads. They are unique and sound great, if you have a song they will work for.
  15. I agree. My Variax acoustic results vary by the song. Sometimes it's passable. Other times I can't get a full mid based sound and it's either too boomy or too shrill. Worth having as an option, but not a great option.
  16. Ok, I didn't fully think that statement out. I guess my JTV with a Bubinga fb could be the rarest yet. But I don't think I've heard of any stock JTV necks coming with ebony, unless I missed that.
  17. Interesting. I really thought they were done producing the JTV's. If you actually get the guitar, let us know. Having an ebony FB will make it pretty unique.
  18. Any Strat replacement neck will fit a JTV69. So regardless of whether Warmoth has a "deal" with Line 6 or not, you can buy one of their Strat necks and put it on a JTV69. Just don't have them drill the mounting holes because the spacing is a little different. They charge you $15 for not drilling the holes. If the link works, here's a photo of my Warmoth replacement neck on my JTV69. It's mahogany with Bubinga FB, SS frets, Earvana nut.
  19. When I started this thread my Helix was always connected to my computer via USB for patch tweaking, and to my DXR12 for monitoring. I have no idea if that affected the problem or not. I haven't used the XLR out in a long time. I did have a noise problem with the USB connected, that using XLR out fixed. My current situation has me back to a combo amp. So my Helix rig only gets sporadic use.
  20. I don't have a definitive answer for you. I bought a PC+ and connect to that with the L6 cable and then out of the PC+ to FOH. I never chased down the cause of the problem that I started this thread about and never contacted Line 6 about it. It was only happening with XLR out and it was not a constant occurrence. Since there were ways to work around it, I just let it go. I'm not currently gigging the Helix rig, so ignorance is bliss here.
  21. I'm a little surprised that no one with a Stomp can tell the OP what their preset 16A is. Seems like an easy enough question.
  22. I'll work on it. I find the JP15 to be fairly different from all my other guitars. Probably worth modeling.
  23. Excuse me for being slow on the uptake, but are you looking for owners of signature guitars, like my JP15, or owners of guitars that were previously owned by a famous guitarist? Dumb question #2: you're looking for a DI recording I assume.
  24. I never realized there was such a problem with attachments here. Can't you just use a third party hosting site like imgur?
  25. If you're tight on space, I would question why you need a pair of anything. But I don't mess with stereo effects, so I have no need for two speakers. I believe you can order Xitone's with a wide variety of covering material. Maybe you can find something that will blend into the decor. Just a thought.
×
×
  • Create New...