Triryche

Yes you can flash via iOS Theolotman, you need to calibrate the pedal after flashing.

Have you flashed your FX100 to 2.0 ?

Nice catch Phil!!

When I first purchased my PODxt, I had a CRT monitor that wrecked havoc on my sound (yes I a bought a PODxt before an LCD monitor!!). Took me a while to figure it out because it only happened when if my pups were facing the CRT. It wasn't a clicking but a harsh amp buzzing/hissing/squealing noise. But after after a few times of the noise going away when my monitor went to sleep, it finally dawned on me!!

Have you tried to repair the devices? Go into you BT settings on the Galaxy and make sure BT is on Power cycled the FX100 Press the BT button on the FX100 On the Galaxy in the BT setting you should see the FX100 Click it to connect When the BT light on the FX100 stops flashing and becomes solid open the AMPLIFi app.

Not that I know of. Maybe try flashing it again. Did you use the PC to flash or BT?

I pointed out this thread to Line6. Hopefully itr is something they can iron out quickly. I know it's a PITA, but you can update to 2.0 with your iOS, update the app, and you will gain the Android functionality. FWIW, I was able to successfully update my FX100 with a Win8 laptop.

What OS are you using?

No, this is not normal. I would update you AMPLIFi and app. There is a new PC utility you can use now to flash the firmware. The current firmware is 2.0

Do any of your amps have an effects loop? If so you could run the main outs into the effects loop. I have done this with a SV MkII HD100 and it was awesome.

Bring a good set of cans with you!!

Currently using a Moto G (2nd gen), so far so good.

I have with a Washburn Acoustic/Electric, sounds decent to me, but I prefer the Tube Instrument Preamp, I also like running no amp/cab sim into a chorus to soften it a bit and a little reverb.

One thing I am not sure about is if it will work with the bundled POD Farm. The OP already purchased the PF 2 license. Give it a try, worse case scenario you can get your money back.

Correct!

When connect via USB with the proper drivers the X3 can be used as a soundcard. Yes there are D/A convertors. There is always an inherent quality loss when doing a D/A conversion, but if you are asking if it would sound worse than your pc's integrated soundcard, the answer is likely no, it will not sound worse and may sound better.

Correct, just make sure you do not select the i-Lok version.

Currently only iOS7, iOS8, and some Android OS's are supported.

Is this in Setlist 1?

The FX100 has some amp models that should work well. A Tube Instrument Preamp and a Line6 Piezacoustic 2. You could also run no amp sim.

Have you run the Monkey? If so do you have green ticks for everything?

You could post it on IdeaScale, but honestly, I don't see this happening anytime soon.

Typically you would use the plug-in post processing. What interface are you using to record?

Yep.

Yes, you can stream the mp3 files without using the AMPLIFi Remote app's music player, but you may not be able to while running the remote app. Or you could import them into i-Tunes then, you would be able to stream them while using the AMPLIFi remote app.