Search the Community

Die deutsche Version finden Sie unter der englischen. Vous pouvez trouver la version francaise dessous l'allemand. Q: What size are the headphone outputs on my Line 6 device? A: The majority of the headphone jacks on Line 6 products are 1/4". The Floorpod series, Pocket POD, Pocket POD Express, Guitarport, and POD Studio/Toneport GX have a 3.5mm (1/8") headphone jack. Q: What is the recommended headphone ohm rating for use with Line 6 products? A: For devices with a 1/4" output, we recommend headphones rated between 150-600 ohm (pro or semi-pro level) studio headphones for best results. For those with an 1/8" output, headphones designed for MP3 player usage are usually a good match. Results may vary between headphone models and manufacturers. Q: Can I use smaller earbud-style (i.e. iPod) headphones with my Line 6 gear? A: Earbud-style headphones (typically under 150 ohms) are not recommended for devices with a 1/4" output. Some users of earbud-style headphones have experienced a "motorboat" sound in the headphones. Results may vary between between headphone models and manufacturers. Q: I noticed that when I plug my headphones into my Line 6 amplifier, there is no sound from the speaker. Is this intended? A: Yes, inserting a plug into the headphone jack will mute the speaker. Q: My Line 6 amp headphone jack is also labeled direct/recording output. Can I use the speaker and the headphone jack at the same time? A: There is no way to have both the speaker and headphone jack/DI output active at the same time. F.A.Q.: Kopfhörer: Welchen Durchmesser haben die Kopfhörer-Ausgänge meiner Line 6 Geräte? Die meiste Line 6 Geräte haben einen 6.35mm (1/4") Klinkenbuchsen-Ausgang. Die Floorpod Serie, Pocket POD, Pocket POD Express sowie GuitarPort und POD Studio/Toneport GX haben eine 3.5mm (1/8") Buchse. Was ist die empfohlene Kopfhörer-Impedanz zur Nutzung mit meinen Line 6 Produkten? Für Geräte mit einem 6.35mm Ausgang empfehlen wir die Nutzung von Studio-Kopfhörern zwischen 150 und 600 Ω. Für Geräte mit 3.5mm Ausgang können alle Kopfhörer benutzt werden, die für die Nutzung mit einem MP3 Player konzipiert sind. Ergebnisse können hier jedoch unterschiedlich ausfallen je nach Kopfhörer Modell und Hersteller. Kann ich auch die kleineren InEar-Kopfhörer (wie beim iPod) mit meinem Line 6 Gerät benutzten? InEar Kopfhörer (meist unter 150 Ω) sind nicht empfohlen für Geräte mit 6.35mm Anschlüssen. Manche Benutzer haben hier ein Motorboot Geräusch in ihren Kopfhörern festegestellt. Ergebnisse können hier jedoch unterschiedlich ausfallen je nach Kopfhörer Modell und Hersteller. Wenn ich meine Kopfhörer in den Line 6 Verstärker einstecke kommt kein Ton mehr aus dem Lautsprecher. Ist das beabsichtigt? Ja, sobald man einen Stecker in den Kopfhörer-Eingang einsteckt schaltet sich der Lautsprecher automatisch stumm. Auf meiner Line 6 Verstärker Kopfhörer-Buchse steht außerdem "direct/recording output". Kann ich den Lautsprecher und die Kopfhörer-Buchse gleichzeitig benutzen? Es gibt keine Möglichkeit, den Lautsprecher und den Kopfhörer Ausgang gleichzeitig zu benutzen. F.A.Q.: Écouteurs Quelle taille est-ce que les sorties écouteurs ont sur mon appareil Line 6? La majorité des jacks écouteurs des appareils Line 6 sont 6.35mm (1/4"). La série Floorpod, Pocket POD, Pocket POD Express, GuitarPort et POD Studio/Toneport GX ont un jack 3.5mm (1/8"). Quelle est l'impédance recommandée des écouteurs pour l'utilisation avec les produits Line 6? Pour les appareils avec un jack 6.35mm (1/4"), nous recommandons des écouteurs de studio 150 à 600 Ω pour les résultats meilleurs. Pour les appareils qui ont un jack de sortie 3.5mm, les écouteurs pour un lecteur MP3 sont un bon match. Les résultats peuvent varier entre les modèles et fabricants des écouteurs. Est-ce que je peux utiliser des écouteurs plus petits, intra-auriculaires (comme les écouteurs iPod) avec mon produit Line6? Les écouteurs intra-auriculaires (normalement sous 150 Ω) ne sont pas recommandés pour les appareils avec sortie 6.35mm (1/4"). Quelques utilisateurs des écouteurs intra-auriculaires ont connu des sons " bateau à moteur" dans ces écouteurs. Ces résultats peuvent varier entre les modèles et fabricants des écouteurs. Si je branche mes écouteurs dans mon ampli Line 6, je n'ai aucun son du haut-parleur. Est-ce que c'est voulu? Oui, si vous branchez une prise dans le jack écouteurs, cela désactivera le haut-parleur. La sortie des écouteurs de mon ampli Line 6 est étiqueté "direct/recording output". Est-ce que je peux utiliser l'haut-parleur et le jack écouteurs en même temps? Vous ne pouvez pas avoir les deux, l'haut-parleur et le jack de sortie écouteurs, actives en même temps.

Applications Q: What are the presets on the Lowdown Studio 110 and LD 15 amplifier? A: The Studio 110 and LD 15 have four savable channels directly on the amplifier, which are Clean (Eden model), R&B (Ampeg B15 fliptop model), Rock (Ampeg SVT model), and Grind (Sansamp model). The Studio 110 also has a “synth” option, accessed by pressing the R&B and Rock models simultaneously. The LD15 has a hidden “Brit model” which is accessed by pressing/holding the Clean and R&B model buttons as your turn on the power. The Clean and R&B lights will flash back and forth to indicate that you have changed the Clean model into the Brit model. Q: Is there a list for suggested settings for the LD Studio110 or LD15 amplifier? A: No, there is no preset list for the LD 110 or LD15, but you can download the dowdown Preset Chart from the manuals section and experiment with the settings (taking note that there is no amp model or channel volume control) Lowdown Presets Q: Are there any video tutorials I can view to learn more about the Lowdown? A: Please see the Lowdown Movies in the product description page. Lowdown Movies Q: Is there an editing software that works with the Lowdown amplifier? A: No, there is no editing software for the Lowdown series as there is no way to connect the lowdown amplifier to your computer. Q: Is there a "manual mode" for a LD Studio110 or LD15 like on the other LD series amplifiers? A: No, there is no manual mode for the LD Studio110 for the LD15. Q: How do I change the tuner's reference frequency on the Lowdown? A: The Lowdown Tuner Reference Frequency cannot be changed - it's 440 all the way. Setup/Connections Q: Is there a direct out on the Lowdown 110 or LD 15 amplifier? A: Yes, there are balanced line level XLR and unbalanced 1/4" outputs on the Lowdown 110, both of which output processed tone. The LD-15 has an unbalanced ¼” output which will output processed tone (which doubles as a headphone output). The XLR output of the Studio 110 is not affected by the output volume of the amplifier, and will send a cabinet simulated tone to your mixing console. The unbalanced ¼” output of the Studio 110 and LD15 is affected by the master volume setting, so keep this in mind when using this as a direct recording connection. Q: What if I do not want the cabinet tone but rather a unaffected tone (like a DI Box to go to the PA?) A: If you desire an unaffected bass tone in addition to the cabinet simulated tone, you will want to go into a DI box and send the DI signal to the mixing console. Be sure to have the instrument output of the DI go into the instrument input of the Lowdown amplifier to get sound from the Lowdown. Q: Can I use a Line 6 controller with the Lowdown Studio 110 or the LD15? A: No, there is no CAT-5 jack on the Studio 110 or the LD15 for a Line 6 controller. Q: Does the Lowdown Studio 110 or the LD15 have an effects loop? A: No, neither the Lowdown Studio 110 or the LD15 has an effects loop. Q: Can I connect an external pre-amp (i.e. Line 6 POD unit) to the Lowdown Studio 110 or the LD15? A: Yes, an external preamp can be connected to the instrument input of the Lowdown, be sure to send an instrument level signal rather than a line level signal to avoid clipping and/or damage to the Lowdown. An external pre-amp can also be run into the MP3 input jack, which would relegate the Lowdown amplifier to a “powered speaker”. Q: Can I connect an external cabinet to a Lowdown Studio 110 or the LD15? A: No, there are no external speaker connections on the Lowdown combo series Studio 110 or the LD15 Specifications Q: What's the rated wattage output and speaker size of the Lowdown Studio 110 and the LD15?? LD15: 15 watts/ (1) 8” speaker Studio 110: 75 watts/ (1) 10” speaker Registration and Warranty Information Q: What is the warranty on the Lowdown Series? A: the warranty on the Lowdown series is twelve months from the date of purchase. Q: How do I register the Lowdown? http://line6.com/account/registergear/ Troubleshooting/Service Q: How do I perform a factory reset on the Lowdown? A: The reset procedure for a Lowdown amplifier is to hold the Clean button for 5 seconds while powering the amp. Q: My amp seems to be malfunctioning. What can I do as an end user? Line 6 Amp Trouble Shooting Q: I am noticing hiss in the headphones with the Lowdown Studio 110? A: This may not be an issue on all Lowdown Studio 110 amplifiers. Depending on what brand of headphones you are using, as well as what amp model/settings are up, you may or may not hear hiss. Individual preference will determine if the perceived signal/noise ratio is acceptable. Please DO NOT return your Lowdown Studio 110 for a replacement unit if you feel that this is an issue. Our service centers would be happy to fix this issue for you. Keep in mind; this fix requires that one of our technicians perform a custom modification to the headphone amplifier, which requires that we open up your amp. The reason that some users may hear hiss is due to the gain structure design of this amp and a couple of surface mount resisters need to be replaced. Customer Support is unable to guide you through the repair and only our authorized service centers can take care of this fix. NOTE: If a customer opens up their amp and attempts to alter their electronics in any way, they will void your manufacturer’s warranty on their Lowdown Studio 110. Also, keep in mind that the repair may take several weeks based on the specific service center’s turn around time. If the nearest service center is too far from your location, and you need to ship your unit to that service center, Line 6 WILL NOT cover the associated shipping costs If you are aware of the above information and you still wish to have your amp repaired, Line 6 will cover the costs of parts and labor. Please have your receipt ready before you contact a service center. If you cannot find your receipt, please talk to the dealer where the amp was purchased, and request a duplicate receipt. Q: Where can I get replacement knobs/speakers/logos for my Lowdown amplifier? Line 6 Store Q: Where can I download a Lowdown amplifier manual? Line 6 Manuals