toneman2121

i think that it is a self test mode. with the function selected, press the view button. when the buttons function is selected. press all buttons. you should see a change in status 0-1. when all the buttons are tested, the previous screen will return and a P will appear to indicate pass. then move to the next function. turn the pots fully left and right, don't forget the output for recording on the back. a couple tests happen automatically. are you sure you are pressing and holding the left navigation while powering on? you are holding the down arrow. you must hold the left arrow

this is what it says on the web site in question Note: This is an old listing. This offers is no longer active on Koopjespakker.nl what!? how can it be an old listing?

i think not. when i perform this operation, a few seconds later the screen displays the amp and fx

when you translate the page, there is a note that says, Note: This is an old listing. This offers is no longer active on Koopjespakker.nl.

i am not understanding your question http://line6.com/support/docs/DOC-2222

i would say it is defective and needs to be replaced. but you can save the patch with the middle where you want it, then park the knob at zero (all the way ccw) and recall the patch. parking the knob at zero may stop it from changing. this requires dis-assembly; clean the pot with electronics spray cleaner

no bean or pro or the rest of the family?

take a small wooden stick and tap lightly on the tubes. you shouldn't here the tapping through the speaker

http://line6.com/support/docs/DOC-3827 this will tell you how to find out which version you have. when you first turn the xt on, the screen will display which packs are installed.

i have the pro plan also. guess i'll break it and get money back for the new design

Factory Reset There may be times when you’d like to reset your M9 to its Factory settings. You may want to recall a particular Factory Scene, for example, or just get back to square one. To do a Factory Reset, first back up any Scenes you’d like to keep (as described above), then follow the steps on the next page. DECAY V. 2.00 THRESH CONTRAST DUMP ALL? DUMP FLDR? RST FACT? MIDI Gate Display DUMP SCNE? CH 1 • Threshold, Decay and Contrast are adjustable with Knobs 1, 4 & 2 • MIDI Channel 1 thru 16 or Omni is set with Knob 3Setup Details 2•6 • Turn the Model Select knob until “RST FACT?†is displayed. • Press and hold TAP while you press down on the Model Select knob - “Reset To Factory? Are You Sure†will be displayed. • To initiate the Factory Reset, press down on the Model Select knob again. All Factory defaults will be reset, including Scene Presets and Global settings

you have to replace the usb connector http://line6.com/support/docs/DOC-4698

http://line6.com/support/manuals/alchemist-212

:o AWW! COM'ON :unsure:

try doing a global reset on your pro. hold the left navigational key down while turning the pod on

ah, then he should ask line6 that question

switch the right and left 1/4" adapter plugs

you should ask your local line6 service center if they will honor a purchase of a new 500 from the u.s. some ebay sellers are authorized dealers i.e. music123

crap, back to square one. what i neglected to tell you is a global reset is required after any reflash. this might have caused the problem. http://line6.com/support/docs/DOC-2222

call line6 or open a support ticket

http://line6.com/support/manuals/spideriv75

here's some parts http://www.fullcompass.com/search.php?parent=1665&search_simple=true&txtAll=line6+variax

http://www.amazon.com/s/ref=sr_pg_2?rh=i%3Aaps%2Ck%3Aloop+pedal&page=2&keywords=loop+pedal&ie=UTF8&qid=1371290663

https://www.google.com/search?q=solid+state+amplifier+crackling&oq=solid+state+amp+cra&aqs=chrome.2.57j0l3j62l2.21950j0&sourceid=chrome&ie=UTF-8

http://www.foobazaar.com/podhd/toneGuide/