toneman2121

the dirt or grime could be INSIDE the switch. it's not a sealed system. you gotta spray cleaner inside the switch to clean it. if indeed the switch is dirty. you might have to change it. there's a project for ya. reformat what?

i think the tuner button got some dirt in it. keep working it, maybe it'll stop acting up. about the tuner not muting, Tuner Volume - You can adjust the tuning volume of your POD by turning the Chan Vol knob while the tuner is active (this doesn’t affect the volume of your not-in-tuner-mode POD sound). Alternatively, if you have a Floor Board connected, the volume pedal will control the tuner volume, too.

http://foobazaar.com/podhd/toneGuide/ there is a lot of reading here but a lot of people swear by it.

try headphones and another cable. i know you said it was good a couple of days before. but you know murphy. is there some significance that you mention Midisport Uno when transferring tones? that's all i got other than needs repair. hope you can work it out without putting it in the shop

http://line6.com/footcontrollers/compatibility.html this is all i can tell you big pappy ;)

there are very few retailers who sell power supplies rated for use with the xt or the hd. you can find p.s.'s capable of ac and dc, but none rated for the xt or hd.

i've consulted my accountant, lawyer and analyst. my accountant advised against it. my lawyer said if i get one we can still sue regardless of the disclaimer and my analyst said you're both crazy :blink:

if any body noticed, rss feed button is now available in the lower left corner

I WANT A DT25 BUT I DON'T WANT TO SPEND CASH WITH OUT A JOB, SOMEBODY GET ME A JOB! :angry: please? :( :wub:

might find something here http://www.fullcompass.com/search.php?parent=1665&search_simple=true&txtAll=line6 ...or call line6...or open a support ticket http://line6.com/support/tickets/

you know that old saying "you can take the power amp out of the pod, but you can't take the pod out of the preamp" or something like that :huh: :wacko: :rolleyes:

nobody has an animal they love? :wub: post it here. the last forum had about 12 pages of pets

i can't offer any advice on dis-assembly but i'm fairly certain there's a way to remove it without resorting to destruction. can you photograph it?

i hope you can get a good translation of it. or maybe your english is enough. the person who wrote it is a very knowledgeable member of this forum, meambobbo

page 2.9 of the advanced pod hd manual

http://foobazaar.com/podhd/toneGuide/setup#direct

no problem, just trying to be funny. sorry my suggestion didn't work. i used this method when the instructions said to unplug didn't work for me. to my surprise, it worked and that's how i do updates. try using line6 uninstall program and start over

i'm very sorry you guys over there have to go through mother natures wrath. i can't imagine being in it. seeing this on tv is scary. forgive me for asking, is that the tornado a mile wide with 200 mph winds? i think there is no best amp, only one that you like. however, when running the xtl through an amp with an fx loop, effectively bypasses the preamp section, letting the xtl operate as the amps pre. so pick one with an fx loop. or you could look at a power amp only and cabinet. all depends on how fat your wallet is. p.s. do you already have an xtl? if not, you should look into the hd500. along with the line6 dt25 or dt50 amps. probably some where around $1500

have you tried to re-flash the memory?

i agree

since it's relatively new, replace it. if it was older, there might be a noticeable height difference due to wear, in which case, a luthier would be able to determine to replace or dress. point being moot.

try this. with your 300 connected to your computer via usb and the power off, open monkey. select drivers and download. when the update tells you to connect, turn the300 on.

i would not buy from craigs list simply because recently, a forum member got one and is having trouble registering. http://line6.com/support/topic/733-cannot-register-pod-hd500-extremely-angry-i-am-screwed/. that's not to say that the one you get would have the same problem. in addition, if the seller has already registered it, you must ensure he deletes his registration or you'll run into trouble. don't buy it without trying it. still that doesn't cover everything if your not familiar with the operation. how much are you saving? why is the person selling after having it such a short time? if he tells you he doesn't like it or it's not giving him what he wants, than he doesn't know how to use it or he didn't use it enough. it might not be the best, top of the line modeler, but it is very good. with some knowledge and some experimenting, you will get excellent results. warranty info http://line6.com/support/docs/DOC-4838

...with no hesitation

three sets of headphones, all with the left side blown after plugged into the pod. is that correct? how is the left and right output of the pod?