toneman2121

next to view new content is a search window. enter asio and other threads with asio problems will come up http://line6.com/support/docs/DOC-4201

thanks for sharing that

and by the way...your post is not the best way to get service

Then the support guy said my best bet was to sell it on craigslist what support guy said this

atreyu2112, on 28 May 2013 - 14:22, said: it's strange how this worked for you then the problem returned. i'm guessing you repeated the steps you took to get it working. give it a good rap with you hand when you turn it on

did you try the reset?

reflash the memory

cassius maximus

this is a quote from ups I have completed the quote and the information is below. Ship To: HAIFA, 31004, ISRAEL Ship From: MARCUS HOOK, 19061, UNITED STATES Total Shipment Weight: 1 LB Rates: UPS Worldwide Saver $86.40 Fuel Surcharge $9.50 Shipment Total: $95.90 USD UPS Worldwide Expedited $82.30 Fuel Surcharge $9.05 Shipment Total: $91.35 USD

cochise brokentail

gotta change them

may be a bad tube

according to my today it's wednesday

http://line6.com/support/community/support/effects/fbvcontroller?view=documents try a reflash

http://line6.com/support/docs/DOC-4698

i would re-flash

http://www.fullcompass.com/brand/LN6.html?page=3&query=&categoryOrder=Bestselling here's a site that's got line6 parts. you can also call line6 directly

excellent

since your pod has v 1.xx installed, a midi to usb is necessary for further updates. get a m-audio midisport uno. others may be used but line6 recommends this specifically. they are about $40 dollars and if you have no other use...paperweight. but ya gotta do what'cha gotta do. then usb to mini usb. Q: My unit cannot update via USB, and I have Flash Memory 1.0x. How do I update from Flash Memory 1.0x to a newer version? A: First verify you have flash memory 1.0x. Please hit the TUNER button and scroll using the SELECT knob to the last page. If you have a version later than 1.0x, you can use your USB connection. In order to update your PodXt from version 1.0x to the latest version, you will need to download Line 6 monkey (as described above) as well as a MIDI to USB interface. We recommend the MIDI SPORT UNO from M-AUDIO. Install the drivers for your interface, then run LINE 6 MONKEY with your POD XT unit connected to your interface. Click on the CONNECT USING MIDI CABLES button, and make sure that you see the MIDI IN and MIDI OUTS set to your interface. Then go through the FLASH MEMORY installation as described above. After this is done, you will be able to update your PODxt series unit using USB. See the following link for more information on connecting to your Line 6 unit via Midi:

then why the reference to the 400

i don't understand. are you saying the 300 has no compression pedals and no noise gate?

do you prefer rosewood or maple? mmm maple

Factory Reset You can reset your Spider Valve’s programmable channels to their factory-programmed states by holding down the Channel A button as you turn on the power. erases your stuff

i'm likin' the one on the right