Search the Community

Hi gents! I just finished wiring up my pedalboard and I can't solve this issue. My signal path goes like this I go with a 4 cable method: Guitar -> Hx Stomp Input -> Splitter cable -> [R side goes to AMP From AMP SEND -> Return R] [L side goes to switcher -> Return L] -> from HX OUTPUT -> Return AMP. Now my problem is when both loops are engaged and some outboard pedals are on I get a high pitch noise like a feedback. I cannot get where is the problem. Can you help me?

Here's a video featuring My board HX stomp, switcher, pedals and midi https://youtu.be/fbQpAtlYb0g

I have hxstomp and es-8 from boss to controll snapshot and other pedals. This problem happens.↓↓ ・Send midi message from es-8 to hxstomp to change snapshot1→2 or 2→3 etc... Usually hxstomp responses it, but sometimes does not. Do you think why this problem happen? If you have same issues, please help me.

Hello to you all. Hope you all are doing great in there very strange times we live in right now. My question relates to the new Pod Go and maybe members of the Helix family as well. We are just collecting information at this point, The Guitar player in our band will be using both an electric and an acoustic guitar during our gigs. The acoustic will have internal piezo pickpus. I guess this scenario is quite common. The plan is for the guitar player to be able to embed guitar management logic into the device he will be using .... To make an example with Pod Go ... Both the Electric and Acoustic guitars are connected to the Pod Go at all times Only one of these guitar is active at any given time. Preset X on the Pod Go will open up for the Electric Guitar to pass through the Pod, and close out the Acoustic Preset Y on the Pod Go will open up for the Acoustic Guitar to pass through the Pod, and close out the Electric As for the Pod Go... I guess we will have to use the Guitar input for the Electric Guitar, and the Effect Loop Return for the Acoustic guitar. For the Electric guitar .... I guess everything is fine But for the Acoustic .... Do we need to do anything to prep the signal from the Acoustic before it enters the Effect Loop Return Jack .... (the acoustic is a mono source, and is expecting a hi-z input) We are aware that the Effect Loop Return can be set to instrument level. Hope someone here has some clever ideas Additional information: We plan to use the Amp Out port on the Pod Go to feed a voice processor that accepts the Guitar signal to manage and guide additional Harmonic voices generated in the Voice processor.The Guitar management feature then becomes important, as no cables needs to be dis/re connected to get the Voice harmony function to work. Kind regards Nils

Recently came across this issue. I tried setting up my HX Effects with a Decibel 11 Switch Doctor to switch presets and snapshots on the HX Effects via the Switch Doctor. Every time I tried to switch to a different preset, it would automatically switch to the tuner when selecting a new preset. Also, I couldn't get it to switch snapshots correctly using Midi CC messages. As far as I can tell, all my settings are correct. Is anyone having issues or doing anything special to switch to snapshot presets via a midi controller? Anyone else having this issue with a Switch Dr? Upgraded from an M9 and didn't have any issues at all. Super bummed right now. Thanks

I Everyone, this is my first post I'm Italian, sorry for the bad english ;-) the question is: Is it possible to use the HX Stomp as a controller for an exteral midi pedal switcher (like the disaster area dpc8ez) as described below? My goal is to set the unit always in snapshot mode, using a snapshot bank per song and the corrisponding 3 snapshot for the sections of the song (verse-chorus-solo/special) I want to use the unit solely for modulation, reverbs, delays and eventually amp simulation, using the dpc8ez (or other midi pedals switcher) as a controller for 3/4 analog drive pedals combination. So...can I assign each button for recalling a snapshot AND a preset on the pedal swicther? Example of a song/snapshot bank: - snapshot/switch n 1: no pedals from the switcher + some effects from the hx - snapshot/switch n 2: preset 1 on the pedal switcher and no effects from the hx - snapshot/switch n 3: preset 4 on the pedal switcher + some effects from the hx thanks in advance to everyone ciao from italy Teo