Triryche

I would power cycle the iPad and then factory reset the AMPLIFi then try pairing.

I don't have a Firehawk but in the app I am able to take an AMPLIFi preset from My Tones. Click on the AMP block, then click Type, then select a Block Type and then you should see the HD AMPs

How are you trying to update, PC Utility or Bletooth?

If you are having problems with the USB update, try another computer or update via Bluetooth with an iOS device. Once you have the current firmware you will also be able to update in the future with compatible Android device.

The switches only navigate thru the 100 presets.

Click the More Reply Options button and browse to the file(s).

Make sure you don't glue it to the shaft.

What did you just call the Firehawk?? :o

:lol:

You probably already know, but just for clarification, you won't see the actual names of the Model Packs in Edit, just the new amps. Does the POD hardware show the packs on p8 in setup?

Why would you be limited to straight guitar sounds? Modeling is output thru the 1/4 jack all well, granted, there's no direct integration with the POD HD or Firehawk line.

I would try other USB ports. Also try another computer with the newest version of Monkey. What OS are you using?

I let the Monkey do all the business.

Before the update, if I were to flash my 89F, the alt tuning in WB would display gibberish, although the actually tunings themselves were fine. If I manually renamed the gibberish to meaningful names it would stick. However, if I re-flashed, the gibberish would reappear (different or blank each time), so it would seem it was a minor bug in the FW and not WB.

Did you inadvertently move the ground lift switch?

That's interesting, I don't have an AMPLIFi 75 or 150, but I will try with an FX100 later this week. You should be able to reflash it to the current hardware via BT with a compatible Android or iOS device or via USB with the PC Utility.

A factory reset restores the current firmware to its foremost state, so any tones that you have performed a Save to Hardware on will be lost, however, you will not lose any tones Save to My Tones.

What flash version does the i-Phone show? What device is your Android?

+1 to Zap. That being said, depending on the signal chain, you may be able to recreate the same tone manually.

I know the mags on regular pups may cause warbling in the modeling if the strings are too close, I wonder what type of weirdness you would get with a Sustainiac. Might be able to coax some unique sounds out of it.

Are you selecting Line6 UX2 in your DAW? The plug-in is typically for post processing on a dry track.

Are you saying you can use it with an i-Phone successfully?

Run Monkey to make sure you have current drivers.Check the Line6 Audio-MIDI control panel to see what you ate sending to your DAW. Make sure you are using the ASIO drivers in your DAW. Also, you can capture wet and dry simultaneously and and the Pod Farm 1 plug-in post processing. TheX3 has a Pod Farm 1 plug-in hardware enabled license.

try to forget BT connection, power cycle tablet, factory reset AMPLIFi, and re-pair.

Did you pair them?