datacommando

Hi, Jimmy, I’m rather confused by your comments. It appears you are quoting me from a 2 year old post about importing files into Helix Native. I wasn’t aware that it required any clarification. My post was entirely to clarify something that another user had mentioned. I thought that I made it clear, that at that time, Native couldn’t import backup files created in HX Edit, but it is possible to import regular presets and bundle file. It’s also possible to drag and drop Presets, Setlists, and IR files between HX Edit and Helix Native. Helix Native even has a hardware compatibility function to match each HX family device. In fact to clarify what you stated here: “It appears that HX Edit allows the import of regular presets and bundle files, but not backup files containing favorites, IRs, and other settings from a hardware unit.” I certainly hope that HX Edit imports backup files containing Favourites, IRs and User Defaults, as that is one of the main functions of HX Edit and is the app that creates those files. Before firmware updates on the hardware unit, HX Edit creates a backup file and then allows the user to selectively restore each component of that backup as necessary. I hope this helps/makes sense. I have been using Helix Native since it’s first release and my Helix floor since late 2015.

No problem - this place has a lack of useful Emojis, but there is one Ha Ha, for amusement.

Maybe the way it's worded - because quite obviously you can have different amps, or reverbs, or anything else available, in up to 8 different snapshots - as long as they are already in the preset first. Although my post was mainly to point out that its very easy to create a multi toned preset with a dual amp set up. Mmm... and a down vote. O.K. fine.

Huh? Yes, you can depending on how much DSP you have available, and all the amps, cabs and effects you plan to use are already in the preset. It’s quite normal to have 2 different amps and cabs (single or dual) on parallel paths to switch between clean, crunch and dirty driven tones. Also, could choose to swap between a Hall and Plate reverb using Snapshots to turn them on/off. Then of course you have the option of modifying any parameters you wish (up to 64 total). Therefore, it’s possible to change delay/reverb times and mix levels, distortion-overdrive on or off, along with changing amp drive levels and other tone controls. Plus you could move mic positions on the cab. Using various combinations of these techniques it is quite feasible that you could create 6 varying tones in a single preset using the 8 Snapshots available in Helix. Even easier if you use Path 1 for Clean and Path 2 for Dirty = 1 DSP for each path - yay! Hope this helps/makes sense. EDIT:

Hi, IIRC, the backup/restore options were modified some time back, maybe around HX Edit v3. Anyhow, if you open HX Edit and click on the Help icon in the lower left of the GUI, you can access the Pilot’s Guide. On pages 27 - 29 you can find the “Creating & Restoring Complete Device Backups” options, including Extracting Files from a Backup. Hope this helps/makes sense.

Are you sure what you are experiencing is not a result of the changes made in firmware 3.15 From the release notes: Command Center > HX Snapshot command parameters can now be controlled by Snapshots themselves. For example, imagine that you are on Snapshot 1 and create an HX Snapshot command on FS2. You set it so that pressing that switch recalls Snapshot 3. You then switch to Snapshot 3 and set the same switch to recall Snapshot 6. Recall Snapshot 6 and set the switch to recall Snapshot 2. Finally, you recall Snapshot 2 and set the switch to recall Snapshot 1. Now, you go back to Snapshot 1 and begin pressing the switch. Each successive press recalls the assigned Snapshot and you would cycle Snapshot 1 > 3 > 6 > 2 > 1 > 3 > 6 > 2 and so on for each switch press. NOTE: this assumes that the Snapshot Edits global is set to Recall. If it's set to Discard, you'd have to save the preset after each set in order for the changes to stick Hope this helps/makes sense.

Yup, the backup routine does Global Settings, Impulse Responses, Favorites, User Model Defaults and Presets. Should the install fail you can restore any, or all of these options.

Lots of folk know - it has been asked so many times. Here’s just one from back in 2019. Cheap option - M- Audio EXP. Hope this helps/makes sense.

No one here gets out alive. - Mr Mojo Risin’ Although, I understand the full quote is - “‘Nothing is certain except death and taxes” - Benjamin Franklin, 1789.

Hi, As noted by @Schmalle in the above post- there is a split point right at the beginning of the signal flow in the “Fierce” preset. It isn’t obvious from your screenshots of HX Edit, but it shows up in this on-line preset viewer: https://dbagchee.github.io/helix-preset-viewer/ Hope this helps/makes sense. EDIT: Another thing that I notice about the Ping Pong delay is that you have it set to a dotted 1/8th note with a scaling factor of 50%. You may want to use that setting, but it also means that the delay offset for the repeat will be at half the main time you have set. For example: at 120BPM - 1/8note = 250ms, 50% scale gives 1/16th note = 125ms.

This is a repeat post - see the answers already supplied here: Hope this helps/makes sense.

Huh! The start of this thread was a question about using Snapshots on the HX FX to channel switch an external amp. It seems that you are using a Stomp XL - no matter, the firmware is essentially the same, other than the FX unit doesn’t have amp models or cabinet blocks. Now I’m intrigued? What are you actually doing that is so complex that you are required to switch between presets in order to perform one song? To reiterate - think of each of your XL presets as a complete custom pedal board. Each preset can theoretically be loaded with all you need to perform a complete song, or whatever. Then by using the 4 Snapshots you can modify up to 64 parameters across any or all of the effects, amp settings within that specific preset. This allows you to perform feats of wonder that are impossible in the real world, eg: one click could change the delay feedback and mix, swap between a room and plate reverb, turn up the drive on an amp, or whatever else takes your fancy. That would cover 4 changes in one single S/Shot leaving another 60 options available to use across the remaining 3 S/Shots. You will find lots of HX users who like to configure their S/Shots to cover settings for Intro, Verse, Chorus, Solo and use them accordingly. In fact the S/Shots can be toggled using a single switch by using Snapshot Reselect. I rather get the impression that you haven’t delved deep enough into the configuration and use of Snapshots to solve the issues you appear to have with “a terrible design decision”. As for the “slight pause while the presets load”, Line 6 have already addressed this for users who disliked it, but it came at a cost, a big cost. Users of full blown Helix models can use “true spillover” that allows for better switching between presets, but in order to perform this minor miracle means sacrificing the use of one of the two DSP chips. This effectively turns a Helix floor unit into a HX Stomp, but with almost transparent preset swaps. Personally, I have never found a need for it on my Helix floor, which has 32 blocks available per preset which should be enough for most people - unless you’re Devin Townsend who uses 2. I would be interested to see what you have going on in your presets that requires you to tap dance so much. Please upload a couple of your presets (.hlx) for examination, along with a brief explanation of what it is you want to achieve. You never know it may yet be possible. Hope this helps/makes sense.

Hi, The whole point of Snapshots is to be able to create “presets within presets”. Snapshots allow you to modify 64 parameters in the current preset. The only thing snapshots can’t do is rearrange your pedalboard or swap out an effect for a different one (unless both effect blocks exist in the same preset). If you are swapping to another preset, that is essentially a completely different set of effects to one one you’re already using, then what you require isn’t going to happen, for precisely the reasons stated by @silverhead in the post above. I realise you say in your initial post “noob question”, so I’m going to suggest that you need to rethink what you want to do, and how to achieve it in the simplest way. I know you don’t want to hear this, but the Owners Manual is your friend. https://line6.com/data/6/0a020a411710a6112a67116f0b/application/pdf/HX Effects 3.0 Owner's Manual - Rev C - English .pdf Hope this helps/makes sense.

Hi, That’s a rather strange idea, especially after all using the Rack for several years. If your Helix Rack has suffered an unexpected exhalation of the magic smoke that smells like electric, then why change horses in mid-stream? You could buy an equivalent replacement unit as a spare: - Helix floor, or LT, for example - load your back ups and go. It would take a heck of a lot longer to try to recreate all your presets on another platform. It’s not as if you can load your backups into either the Fractal, or Neural options. You really haven’t thought this through. Regarding your comment:- “but it means I wont have any recording device for at least 2 months”. Again, huh? There are lots of very cheap, but functional, audio interfaces available that will allow you to hook up a guitar to a DAW running HX Native. https://www.thomann.de/gb/focusrite_scarlett_solo_3rd_gen.htm https://www.thomann.de/gb/behringer_u_phoria_umc202hd.htm End of problem! This would possibly keep you recording until the Rack returns from service. Always have a backup solution. Hope this helps/makes sense

Hi, If there was any cause for alarm, the usual place to check is in the coloured banners across the top of this page. There was a notice about an overheating issue with wireless Relay G10 posted up there for many months. Let’s check with out Italian contributor, @PierM - Are you aware of this? Nobody seems to think it’s true.

Hi, Short answer AFAIK - No. My guess, for what you want to be able to do, is plan your setlist prior to the gig which should make navigating presets a little easier, even without the 2 other switches. Hope this helps/makes sense.

Hi, Before buying the HX Effects unit, you might want to familiarise yourself with its capabilities by reading the manual. https://line6.com/data/6/0a020a411710a6112a67116f0b/application/pdf/HX Effects 3.0 Owner's Manual - Rev C - English .pdf From the HX Effects 3.0 Owner’s Manual - Rev C - English - page 47 Global Settings > Switches: “By default, Stomp footswitch mode displays 6 stomps. You may also choose “4 Switch”, which replaces FS1 and FS4 with up and down switches.” You might also want to check out using the Command Centre, which theoretically allows you to assign almost anything to any footswitch - Disclaimer:- I haven’t seen this done with the HXFX, but I have seen the preset UP/DOWN switches move to different positions on all the other units. From the manual page 41 Command Centre: ”Configure footswitches to expand your device’s Stomp mode with additional control functions (see “HX Preset, Snapshot, and Looper Commands” on page 43).” Hope this helps/makes sense.

Hi, The whole point of having a block named “Harmony Delay” is to differentiate that particular delay block from a totally different type of delay - “Reverse Delay” for example. The green colour of the block also serves a similar purpose, by showing that is delay block rather than a modulation block which are coloured blue, or a reverb which are orange, etc. Line 6 went to great lengths to name, and colour the blocks to make the user interface as simple, and easy to use as possible. Hope this helps/makes sense. EDIT: From the Owner’s Manual:- “Stomp mode displays colored labels representing the assignments for footswitches 1~6, so you know exactly what you’re stomping on in the heat of battle. Alternatively, you can change the Stomp Mode to show four footswitch assignments, with Up/Down switches at the left (accessed via the Global Settings > Footswitches > Stomp Mode setting”

Hi, Simply load up HX Edit, select the Factory 1 setlist and make a screenshot of it, rinse and repeat for the rest of the setlist stuff. Print it out and stick on your wall - done. As to what purpose this would serve, I have no idea, because most of the names given to the Factory presets are totally arbitrary, or complete nonsense, which is what started the whole “Let’s put the real names to the presets“ thread - yet another exercise in futility. Sometime forum contributor “Malhavok” (Ben Vesco) used to keep an archive of what presets had changed in various revisions of the Firmware. IIRC, this continued until somewhere around v.2.80 and I think he may have given up on it now. Anyhow here’s a link to his info - scroll down to the bottom of the page: http://benvesco.com/store/line-6-helix/ Hope this helps/makes sense.

Hi, Downloaded from https://dshowmusic.com/category/line-6-helix/ Hope this helps/makes sense line-6-helix-microphone-models-dshowmusic.pdf

“Le plus grave c’est la nonchalance de line6 à nous traiter comme des petits enfants sans eux même débloquer la situation avec un correctif - The most serious thing is the nonchalance of line6 to treat us like small children without them even unlocking the situation with a correction“. Vraiment? Êtes-vous absolument sûr qu'il n'y a pas de correction à ce problème? Quote from a post on TGP by Digital Igloo 14th Feb 2023. (Eric Klein, Chief Product Design Architect, Yamaha Guitar Group | Line 6 | Ampeg | Córdoba | Guild) “Happy Valentine's Day, everyone! 3.52 for Helix Native and HX Edit(and 1.41 for POD Go Edit) are now live. 3.52 fixes an issue where the application may not launch when an SD card is inserted on Windows-based computers. THIS IS ONLY A BUG FIX UPDATE FOR WINDOWS USERS. 3.51 REMAINS THE LATEST FOR MAC USERS.” The information regarding this fix is also included in the Release Notes for v.3.52 on the download page. Hope this helps/makes sense.

Hi, Here we go - one more time from the top. Go here and follow the instructions to the letter. If you feel unsure about performing the update, please find a 14 year old computer geek to do it for you. Hope this helps/makes sense

Hi, Here ya go. https://www.guitarlobby.com/best-pitch-shifter-pedals/ https://www.guitarworld.com/features/best-pitch-shifter-pedals Donner, Hotone and Mooer are the cheapest options. Hope this helps/makes sense.

Hi, I’m not really sure that I understand what you are trying to achieve here. I own a Helix Floor not the LT, so bear with me on this. Looking at the example you quoted - the “Level” parameter on an EQ Block assigned to a foot switch. Well, I tried this on the Helix and the LED on the switch turns grey, because the switch is not engaged (bypassed). Turn it on and it will light up white (grey undimmed). The thing is with the Level being controlled by the foot switch as you mention it will be either On, or Off. You can achieve the On/Off state by assigning the whole EQ Block to a foot switch. I really don’t understand what you are trying to do with this idea. If you are wanting to control parameters within any amp, cab or effect block in your preset, then you should be using Snapshots. It is what they are designed to do. See the Helix LT 3.0 Owner’s Manual - Rev E - German - Page 48 > Snapshots. https://line6.com/data/6/0a020a411124d648263bacc7f1/application/pdf/Helix LT 3.0 Owner's Manual - Rev E - German .pdf Hope this helps/makes sense.

If you have an issue that qualifies as a genuine “bug”, you need to post to this thread: Generally, when strange things start to happen in your hardware the first thing to do is perform a Factory Reset. You didn’t say which unit you have where this is happening, but here’s a full list of reset options. Helix Floor/LT: Turn unit off and then back on. Hold in Footswitches 9 and 10 right after you turn the unit on, throughout the boot process, until you see that your factory presets are loading. Helix Rack: Turn unit off and then back on. Hold in Encoders 5 and 6 right after you turn the unit on, throughout the boot process, until you see that your factory presets are loading. HX Effects: Turn unit off and then turn back on. Hold Footswitch 6 and Tap throughout the boot process, until you see that your factory presets are loading. If you run into any trouble with a failed update or your unit will not boot up, try powering on while holding the right arrow ">" This will put the unit into update mode and you can re-install the latest firmware from there. HX Stomp: Turn unit off and then turn back on. Hold Footswitches 2 and 3 as the unit boots up. HX Stomp XL: Turn unit off and then turn back on. Hold Footswitches C and D as the unit boots up. If the issue continues you may find it advisable to contact Customer Support. Hope this helps/makes sense.