arislaf

Thank you Silverhead, your comments always make my mood go up.

Just gonna leave this here, if it is prohibited, may the moderators delete it. https://www.dropbox.com/sh/k4d9xc5jjdvq2b6/AADTNr48c9RZ_x6X9JaOMX5Oa?dl=0 Updated with ir and new amps

Bit outdated but still the best https://line6.com/support/topic/31789-helix-models-definitive-cheat-sheet-all-model-names-with-descriptions/

Cali iv (mesa mark 4), lead chanel, can go from clean to distortion and has a great integrated eq. As for a nice all around cab, green 25.

Thanks mate! Although i am a full floor helix owner i appreciate it! Well done!

Try in parallel path the octoverb and behind it the reverse delay. Or vice versa. You will get there.

Great tip, JCM 800 came to life after it as a metal amp of post production! Thanks !!

Would be nice to use a parametric eq with these setings AFTER THE CAB Low Level: -5dB Low Freq: 495Hz Low Q: 1 Mid Level: +12dB Mid Q: 0.5 Mid Freq: 5kHz Low cut at 100hz High cut at 7000 and/or the cali eq with the classic V shaped parameters, +4 db, +2db, -4db, +2db, +4db (as an example) And last effect in the chain, a tube compressore with default threshold, gain at 7.1 to 7.4, set to limit, emphasis 1.6 Gonna love the results.

Try another unit. Go to the nearest musical store with your guitar and cable, and try another helix. If the result is ok, then it is your unit. Send it back since it is still under warranty, and get another. If your guitar and cable are lifeless in the other unit, then it is your guitar or cable broken.

Pfff, amateurs... Got Helix, a new laptop, new studio monitors, and on top of that, absinthe and 2 prostituttes to spend the weekend... And the wife? Never came at the marriage!!!!

Psarkissian's lights.

He is a Line 6 personnel, expertises in variax, and the most efficient guy to help you out.

@psarkissian Can you please give us your lights?

Yes there is! I clearly hear something dual coming out. 1)Open your workbench and see if the magnetic blend is rised. If yes, nullify it. If no, try to reinstall the firmware on the variax. 2) Is your magnetic pickups rised? Have you swap the pickups with others? If yes, make sure to lower the heigh of the pickups. If you swap, make sure there is no string pull from the new pickups 3) If nothing of the above, maybe hastag psarkissian to help you.

It is the guitar you are hearing. Rise the volume of your speakers and the problem is solved.

Not true. Opposite of a downight...

Awesome! Just remember, if for the therapy you will go to the 《white house》 you will have the chance to meet great personalities !!! Who knows, maybe Napoleon, or if you are lucky enough jimmy hendrix! Been there, had a helluva of time! Trust me i am an engineer!! :D on topic, i did this amp on bias amp 2, and it sounds amazing, as well as the jtm 45 preamp run in a bassmam poweramp ( old jts 45 of podxt) sound amazing, i can get pretty close on helix with the legacy fuzz face 2 eq and bassman. Wanna try these amps? Get those with the strange names https://www.dropbox.com/sh/4r7gucctc4ydkye/AACzuVidRrsSbORyqG72fpwSa?dl=0

Helix native.

What i would like to see is a 700 with HX technology and NO pickups. Untill then I enjoy my 69s. https://1drv.ms/u/s!AugMNUffMM-8iFlOJ7R4TRjMVMRX https://1drv.ms/u/s!AugMNUffMM-8jB2exbJn9xhVppb8

Yes!! Runing an ac15 into a jcm45.... or vice versa! Sounds like my dream tone!!! And that is the reason i want separate power amps.

Maybe it is the guitar that you are listening to. Maybe this time you reduced the volume on the speakers or on helix, and that is the reason on headphones it is not there. Just guessing, it happened to me to listen the guitar original tone like this.

I believe on 2020 just specs. I hope separate power amp.

You fackin Ugga!!! Did yo mama was Ugga as U?? Just kidding with the U word...

So any news regarding the spring update?

Thank you very much mate!!!