PeterHamm

El Cap might be your problem. There are TONS of peripherals that are having major issues with El Cap. Problem should be solved soon, but some of that is gonna have to be apple. They have screwed the pooch on this update.

Do you have the very latest firmware and librarian software?

POG2! That's the one I want.

I think you need a new version of the Helix Librarian.

Are you, by any chance, going through a USB hub? Because you can't, and that would cause this.

This is normal and to be expected. You are splitting the sound in half.

I don't think there's an easy way to help you with this. A simple midi controller would only give you basically what you have now. You could use a Midi Mouse to just cycle up and down one at a time. The 1/4" jacks are really only for expression pedals. One thing I've learned with Helix is that I need FEWER patches, because I can often do the work of 2 or 3 with just one.

I haven't tried recording with it yet. I will do that very very soon and try to remember to report back.

Sounds like El Capitan is still a problem. I know Line 6 is working on it. I wish Apple was... They have really delivered a dog of an OS update.

you can set any parameter to either go up or down with a pedal. I will probably post a patch or two in the next few weeks when I finally get normal guy time to do stuff. For instance, I have EXP 1 always changing states between my clean and dirty sounds on my amp. So heel down might have a very low number for preamp, moderate numbers for bass, mid, treble, and presence and output... then... when I go to toe down, the preamp gain increases, bass goes (way) down, mid goes up, treble depends on the amp, presence and output normally go down. I just program it one parameter at a time and then adjust after I'm finished (which is easier, believe it or not, on the HD 500 than it is on the helix, but it's not bad). At the same time, when I'm clean my delay is more present than when I'm dirty. BUT... I may be changing my workflow, because now I can use a footswitch to go between two different amp states. That is huge for me and might free up that EXP 1 for something else.

I would do some kind of re-flash of the firmware, or make sure you're upgraded to the latest FW, or both, first.

Actually I push the pedal down and the sound gets dirtier, all the tone parameters shift somewhat, and the delayed signal gets a teeny bit SOFTER. I find that "present" delays work better with cleaner sounds. I normally go from somewhere around 45% mix clean to about 30% distorted.

Yeah, El Capitan is a total mess, and not just for this. TONS of people are having problems with El Cap and all sorts of peripherals and programs.

you need to be sure you can't do everything you need within a song by switching FX on and off within the patch. I know, for me, that things I used to need 3 patches to accomplish on HD 500 (which didn't have trails or instantaneous switching either, btw, I don't think any current solution does) I can do on only one now with Helix.

I have delay mix as one of the parameters of my EXP 1 that goes from clean amp to dirty on every single patch. Works great.

I will never... ever... again... do a patch where the amp and cab aren't split up. It's a fantastic way to do it.

I have used... Old Korg EXP2 (using audio output, not exp jack) Vox V850 (250K volume pedal) EB VP Jr. (also 250K volume pedal) and Mission EP1-l6. All work great. I like different color/style pedals so they are easier to keep straight for the different functions I use them for, rather than all the same.

DI, it might be helpful to know how much processing they take. I already know, by trying things, that the Plexis are the absolute most resource hungry, but they aren't "my thing" anyway really...

Yes. there is. It is functionally identical but much smaller than the rack.

Some other things, try using only one amp and two cabs. That will save horsepower and sound great. And some amps are more DSP intensive than others, especially, iirc, the Plexi amps.

I have not had this happen but I always expect it will, so I back up to my computer every time I do any editing. Start doing that, and if it happens again, I'd open a support ticket if it were me.

The workflow and functionality of Helix has been as revolutionary as the sound for me. I would not want to use this without the foot control. I need it. I use only one patch for a long time and turn FX on and off, and I get about 3 times as many useful sounds out of one patch as I did with HD 500. If budget is an issue, consider saving money and getting the floor unit if you can. I would not get the rack without the foot controller under any circumstances.

I was able to test it today. Yes, the Helix responds to program changes from Logic X. But prog 0, for instance, will take you to the very first program in the very first user set. You may have to make sure your user set is there, instead of the factory set.

Not to mention that the editor will give you zero improvement in usability or ease of use (other than bending over and stuff) because it's just the exact same as the display on the helix. Yeah, I'm glad they didn't wait, too.

I'm pretty sure since digitaligloo spilled the beans on another forum I'm allowed to tell you that I'm beta testing the rack/controller combo. It's a really great setup with the foot controller. I didn't think I'd like it as much as an all-in-one unit but I think I do. It is very lightweight so it will fit just fine in a rack screwed in with the holes in the front. The handles, however, protrude (as they often do) so SOME racks are problematic if you need to close them (I can't close my rack, am thinking about removing the handles or buying a new rack). I might have a chance tomorrow to test the midi functionality from Logic X for you. If I can, I'll get back to you.