Search the Community
Showing results for tags 'pre'.
Found 7 results
-
Hello! Does anyone know if it is possible to assign the tap tempo switch to control the pre-delay on any of the reverb blocks in HX Effects? I have an EHX Cathedral that does this and it has become one of my go to delay/reverb sounds. I'm wondering if this is possible within HX. I thought about creating a custom block that includes both a reverb and a single repeat delay set to full wet before the verb, but i'd love to find a cleaner way to do it. Anybody have any thoughts?
-
Application Q: What are the presets on my Spider Valve amplifier? A: The user presets and artist/song presets for the Spider Valve are listed as attachments at the bottom of this document (please be aware that they are identical to the Spider III with the exceptions notated in the document). The Spider Valve user presets are the 36 user-programmable presets. The artist/song presets location cannot be saved, but you can modify and/or store these setting in the 36 user-programmable presets. If you would like to return your unit to the original presets, please perform a factory reset. Q: I noticed that some of the Artist/Song Presets from the Spider III are not present on the Spider Valve? A: Yes, some of the Artist/Song Presets from the original Spider III release were not included in the Spider Valve release due to space restrictions (please compare the two lists for clarification). Q: Are the Spider Valve series amps Mono(phonic)? A: Yes, the Spider Valve series amplifiers have a monophonic output (as are most tube amplifiers). Q: How can I connect a POD unit to my Spider Valve series amplifier? Connecting to Amps and Computers, Output Settings, Floorboard Compatibilty, Fletcher Munson, Multiple Amps Q: Do the Master volume and presence control applied to the power amp section only? A: Yes, the master volume and presence control are true analog. Q: Where is the Master volume located in the chain? A: it is after the preamp, and before the power amp. Specifications Q: What speakers are used in the Spider Valve amplifiers? Spider Valve 112: Celestion Vintage 30, 8 ohm Spider Valve 212: (2) Celestion Vintage 30s, 16 ohm Spider Valve 412 cabinet: (4) Celestion Vintage 30s, 16 ohm Q: What tubes ship in the Spider Valve amplifiers? What is the power output? Spider Valve 112: (2) Sovtek 12AX7LPS preamp tubes, (2) Sovtek 5881/6L6WXT power amp tubes. 40 watts. Spider Valve 212: (2) Sovtek 12AX7LPS preamp tubes, (2) Sovtek 5881/6L6WXT power amp tubes. 40 watts. Spider Valve HD: (2) Sovtek 12AX7LPS preamp tubes, (4) Sovtek 5881/6L6WXT power amp tubes. 100 watts. Q: What are the function of the 12AX7 tubes? A: V1 is the booster to the output tubes, V2 is the phase inverter for the output tubes. When viewing the amplifier from the back, V1 is on the left side on the combo and the right side on the head. Q: Can the SV handle another 12A_7 style tube without damage to tubes or circuitry? A: Yes, but as these tubes act as a phase inverter and a boost to the power amp (rather than traditionally "cleaning up" the preamp section), you may not get the result you are looking for. Q: What Line 6 controllers work with the Spider Valve series amplifier? Controller compatibility chart Setup/Connection Q: Is there a bias switch to change the power tubes to EL-34s or other power tube types? A: No, the Spider Valve does not offer bias switchable options and was designed to only be used with 6L6 power amp output tubes. Q: Is the effect loop series or parallel? Is the effect loop mono or stereo? A: The effect loop is series mono. Q: Is there a headphone output on the Spider Valve series? A: There is no headphone output on the Spider Valve Series, but you can use the XLR output to go to a mixer, then use the headphone jack from the mixer. Q: Can I run my Spider Valve amplifier without a speaker load? A:No, you cannot run the Spider Valve series without a speaker load. Please see the following link for more information on cabinet connections: Cabinet Connection and Ohm F.A.Q. Q: Can the Spider Valve be run with a Variac? A: This is not recommended as the lower voltage can cause problems with the digital processing in the Preamp section of the Spider Valve. Q: Can I run a Palmer S.E., THD Hot Plate, Power Soak, etc. for speaker simulation or power attenuation? A: There are no known issues regarding the use of any direct recording simulators or power attenuators between the power amp output and the speaker cabinet, but if there is damage caused by improper connections or malfunctioning gear it will not covered under the Line 6 warranty. Q: Do the 112 and 212 combos support external speaker cabinets? If so, will the external cabs mute the internal speakers of the SV? A: Yes, the Spider Valve supports the use of additional cabinets. Please ensure that the ohm load is correct to avoid damaging your amplifier. Q: What is the bias voltage for the 6L6 tubes? A: 35 ma (or mv) Q: Does the XLR output still send signal when the amplifier is on standby? Is there an FX loop? MIDI ports? A: The XLR Direct Out (which is a POD-style output with speaker simulation) will function when the amplifier is in standby mode.The Spider Valve has a pre-amp out (effect send) and Power amp in (effect return) section. There are no MIDI ports on the Spider Valve series. Q: What do the FBV shortboard stomp, FX Loop/Function 1, and Function 2 do? A: The Stomp button activates the "boost" on both the original (Mark I) and Mark II shortboard. The FX Loop (Mk I)/Function 1 (Mk II) activates the Noise gate. The Function 2 (Mk II only) has no function on the Spider Valve. Q: Does the FBV controller (long board) work any differently that the other FBV controller switch the Spider Valve series? A: The FBV controller (long board) work just like the other controllers, but there are numerous buttons that will have no functions, such as the Stomp 2/3 buttons, tremolo, and favorite channel. Q: Where is the fuse located in the chain? A: The fuse is located between the 12AX7s and 6L6s (there is no "master" fuse). Spider Valve Cabinet FAQs Q: What are the specs for the 4x12 cabinet? A: 9 ply, ¾" wood with Celestion Vintage 30 speakers. There is no ‘internal baffle`. Q: What are the ohm load options for the 4x12 cabinet? A: The switchable ohm load options for the 4x12 cabinet are 16 ohm mono, 8 ohm stereo, and 4 ohm mono. Trouble shooting: Q: What is the manufacturer’s warranty for SV? A: The warranty for the Spider Valve amplifier is 12 months from the date of purchase, the tubes are warrantied for 90 days from the date of purchase. Q: How do I perform a factory reset on my Spider Valve? A: The factory reset for the Spider Valve series is to hold the "A" button while powering the unit. Q: Will using different brands of 6L6 tubes in the Spider Valve void the warranty? A: No, feel free to experiment with other tubes of the same type. Q: My amp seems to be malfunctioning. What can I do as an end user? Amp Troubleshooting Tube Troubleshooting and Replacement *Q: Where can I download a Spider Valve manual? Line 6 Manuals Miscellaneous Q: Where can I get a cover for my Line 6 amplifier? Cases And Covers Q: In the manual's explanation of how to save patch and perform 'NAME EDIT' with the FBV shortboard: Page 45, it states to use the 'COMP' & 'MOD' button to select one of the characters of the channel name. I don't see a COMP button, what should I use? A: Please use the 'STOMP' & 'MOD' button to select the characters from left to right. This was an error in the manual due for revision. Spider Valve Preset Patches.pdf
-
Hey all. This is going to sound dumb but I would love to get some (constructive) thoughts on this... I use my POD HD500X as a pedalboard for its great reverbs, delays, overdrive, modulation, etc. through my VHT Special 6 Ultra combo for guitar and pedal steel guitar. My pedal steel does not have an onboard tone or volume control, which is pretty common for those. Many players use a compact preamp mounted to their steel guitar so they can make tweaks to volume and tone on the fly. I don't intend to use amp emulation most of the time but I may do it on occasion to go direct to the board at church or a gig. Question: what is your best method to use the HD500X as a pre-amp? Subquestion: can I use the hardware knobs to modify treble/mid/bass/presence/volume (sound) without emulating an amp or cabinet? Subqueston: can this be done without using a pedal chain slot? Currently I am using the HD500X with Studio/Direct output mode and input Z set to 3.5m or 1m to neutralize any color to the signal (many, many thanks to @hurghanico for their invaluable advice!) . But I'd like to be able to shape the tone and maybe add a little boost, ideally without using one of the available blocks in the pedal chain. May you have a very Merry Christmas, strong health and the unmistakeable peace of the presence of the Lord this season!
-
So I've recently starting experimenting with Reaper. I've been recording directly into the Reaper via my Helix, however I think the overall sound could probably be tweaked a little. BUT I'm not sure how or where to start.. Do I need additional software or programs to be able to do that? Or can I do that via Reaper? Ideally, what would be the best way? (the simpler the better for me!) Thanks.
-
So when I place an EQ block pre amp, no effect is present (even on extreme settings, nothing is heard). it is only once I place it post amp is it heard. Why is this? Am I the only one having this problem? Or is this not a problem and was Helix designed this way?
-
Hey guys. I'm having a bit of a volume issue that I'm looking to sort out. As we know, the Vox AC30 preamp on the POD is drastically more quiet that the full version. However, topology 3 on the DT (with no HD500 connected) can go very loud - as loud as all other topologies on the amp. My question is how/whether I can use the amp to model the AC30 preamp and simply use the HD500 for effects. It's just that the AC30 preamp on the POD is so damn quiet. By this logic, the Vox will be a lot louder, with my HD500 still connected and in use. Is it doable, or are we herding cats here? Thanks! Nick. -
Q: What is the difference in power rating between tube and solid-state power amplifiers? A: Tube power outputs can peak 200 to 400% above solid-state, so a 50watt tube power amp can output a volume equivalent to a 100-200w solid-state amplifier output. Q: What are the common Preamp tubes? A: The 12AX7 (ECC83 is the European term, or the military term of 7025) is the most common preamp tube for driving the Gain and EQ sections of the amplifier, as well as driving the signal into the power amps. The following tubes have a lower power rating and can be used in the preamp section or other amplifier functions such as the reverb tank drivers, inverters, etc. 12AT7 (ECC81, 6201): 60% power of the 12AX7 12AU7 (ECC82, 5963): 19% power of the 12AX7 12AY7 (6072): 45% power of the 12AX7 Q: What are the common power amplifier tubes? 6L6 (5881/KT66): Commonly used in American amplifiers such as Fender, Mesa, Peavey. Typically has more low-end emphasis. EL34 (6CA7/KT77): Commonly used in British amplifiers such as Marshall. Typically has more midrange emphasis. EL84 (6BQ5): Commonly used in Vox , Gibson, Matchless, and Bad Cat amplifiers 6550 (KT88): Commonly used in VHT, Ampeg SVTs, and Leslie Speakers cabinets. Typically has more power output than the other tubes listed here. Q: What other power amp tubes are compatible with the Spider Valve? A: Line 6 stresses using 6L6 (5881/KT66) power amp tubes only. Other power amp tubes such as 6550's can draw too much power and damage your amp and void your warranty. Q: How long should I let tubes "cook" after biasing before I measure again? A: The standard cooking time is 3-6 hours after an initial bias (regardless of the tube age).
