-
Posts
9,303 -
Joined
-
Last visited
-
Days Won
180
Everything posted by phil_m
-
Use Foot Control From Axsys 212 On Spider 1v?
phil_m replied to macgreer's topic in Spider IV / Spider Online
The old foot controller isn't compatible with the Spider IV. -
Mostly correct... It uses PC #0 - 47 for the scenes. There's a table on page A.2 of the Advanced Guide that says what PC#s are associated with what scenes.
-
It does send program change messages when you select a scene, but its MIDI map cannot be changed. The PC messages it sends are the ones that are associated with the 48 scenes.
-
Where Is The Dream Rig...
phil_m replied to Tboneous's topic in James Tyler Variax Guitars / Workbench HD
There is a "Share Your Settings" sub-forum: http://line6.com/support/forum/12-share-your-settings/ If anything, I could possibly see sub-forums in there. -
I really don't hear a lot of effects on any of those tunes. On "Gravity", it sounds pretty much like he's clean with the reverb from his amp. So if your amp doesn't have reverb, the '63 Spring effect could get you pretty close. On "Belief", he's using some sort of distortion for the intro. To me, it sounds like the M13's Tube Drive effect could get you something like that tone. On "Crossroads", it's definitely some sort of fuzz he's using. I would try the M13's Facial Fuzz as a starting point. For Mayer's tones, it really comes down a lot to getting that amp and guitar tone down first, though. He mostly uses effects to add flavor to his core tone. Unfortunately, I think you're going to have a harder time with the guitar tone simply because you're trying to match his single coil based tone with humbuckers.
- 4 replies
-
- 1
-
-
- john mayer
- black1
-
(and 4 more)
Tagged with:
-
Where Is The Dream Rig...
phil_m replied to Tboneous's topic in James Tyler Variax Guitars / Workbench HD
I'm not saying I don't see the point entirely, but it seems to me that even with the Dream Rig, most of the questions are usually focused on one piece over the others. And really, from a settings standpoint, the vast majority of the tweaking is done in the POD itself. I just think that they probably want to avoid making it too segmented so that there are different forums for every different permutation of product. -
Actually, you can change the inputs globally. On the setup screen 3/10, there's a parameter called "inputs setup". If you select "global" here, the way you setup the inputs will override any settings you have saved with your presets. In HD500 Edit, this parameter is up in the upper left hand corner of the screen.
-
Why Does My Recorded Loop Fall Aut Of Tempo After A Few Seconds?
phil_m replied to bassman1959's topic in POD HD
It depends on the context of the performance. When playing with a band, it's going to be hard, but not necessarily impossible. The POD's looper is really a slightly improved version of the DL4 looper, and I've seen all sorts of people using the DL4 live over the years. A lot of them have been solo acts, but there's been a few with bands. Looping is an art in and of itself. This little piece by Phil Keaggy is using the DL4, I believe. -
Your Jedi mind tricks won't work on me... Probably not on Line 6 either... :ph34r:
-
Well, good luck with that... It ain't gonna happen.
-
Not to state the obvious, but it's pretty easy to find a used X3L. Problem solved.
-
Line 6 M13 Turning On & Off, Screen Display Errors
phil_m replied to leejlewis's topic in M5 / M9 / M13
As Zap said, the 2.04 update addressed the power cycling issue. The scrambled screens, though, make me wonder if you may have something else going on. Are you using the Line 6 power adapter to power the M13? -
Regarding the expression pedal setting and the physical positions of the pedals, that is just the way it works. Different manufacturers do it differently, but with pretty much all Line 6 products, the physical position of the pedal always effects the presets (assuming, of course, that the effects that are being controlled by it are on when you switch to the preset). To create a dual tone where you have one of the sides the acoustic and the other electric (the magnetic pickups on the Variax), you need to put the effects loop block at the end of the path of the tone you want to use for the acoustic. You would then use the effects send as the output for this tone. Beyond that it's just a matter of configuring your inputs correctly.
-
Pod Version 2.0 Midi To Usb Mac Problems
phil_m replied to Cavesounds's topic in POD 2.0, POD XT, Pocket POD, FloorPODs
What problems are you having? What are you trying to do? Are you trying to use Line 6 Edit? -
I have a 2012 JTV69US, and it's pretty much my main guitar any more. I can't say I have any real issues playing on the neck. There have been a few times when the E-string has slipped off the neck up high, but that is mainly a result of me being sloppy. I've had the same thing happen on Strats and a Jazzmaster, for instance. I also don't have any problem playing an open A7 and keeping the G string ringing (I actually just tested this to make sure I wasn't lying). Overall, I find the neck very comfortable.
- 38 replies
-
Actually, increasing the volume with the channel volume knob in the amp block doesn't change the tone. The way to think of that parameter is simply as a volume control for the the amp block itself. It's not related to any of the amp modeling. Now changing the drive or the master volume DEP will affect the tone. If you put effects after the amp block, changing the volume with the channel volume parameter can potentially cause clipping in some effects.
-
If you put the effects loop block in the signal path and have it turned on and don't actually have anything in the loop, you won't get any sound coming out of the 1/4" outputs. That could be one thing you're seeing. So unless you actually want to use the loop, don't put it in your tone.
-
Should I Jump From A Vetta To A Dt50/hd500 Setup?
phil_m replied to ChuckSteak01's topic in DT50 / DT25
In low volume mode, you're essentially depending completely on the digital modeling to get the tone. The DT50 is acting more or less like a tube power amp. You'll notice in low volume mode, the class and pentode/triode switches don't do anything. That's because the analog topology circuitry is being bypassed. To run the DT50 at 25W, you switch the the pentode/triode switch to triode. And even then, it's not really the same as a DT25. The DT50 uses EL34 tubes while the DT25 uses EL84 tubes. Running EL34 in a triode configuration isn't really the same as running EL84 tubes in pentode. -
Not necessarily... There are other reasons for using a POD rather than going the amp and effects route. One of them is if you're in an environment where stage volume is extremely limited, and you have to go direct. The POD is a great solution there even if you don't use a lot of amp models. I actually tend to agree with the philosophy that in a live situation, the less patches you have to deal with, the better. I have never liked the idea of having dedicated presets for every song. It just seems things become unmanageable pretty quickly. But that's just how my brain works.
-
Well, I have no information, but I'd just say I wouldn't hold my breath... You don't see very many software updates for hardware platforms that are almost five years old.
-
Fixing Damage To Frets Jtv89f
phil_m replied to Leftzilla's topic in James Tyler Variax Guitars / Workbench HD
I would think you'd want to get the damaged fret replaced. Shouldn't be a big deal for a luthier to do. I think sanding or filing it would probably only lead to more problems.