arislaf

It is normal for the version 2.0, you can do manually the correction...Otherwise yes, by reverting to 1.9 will solve the problem automatic.

Through the pod???? I though to use the workbench HD it's possible only with the small Hub...

This is not a bit of loose..This is one step before take off...........

Welcome! Well there is for a single amp patch, or if you use after the mixer a monophonic effect. For the single amp patch you mute the (e.g.) B channel and put the A on center. Voila, became monophonic. Or some effects (i think comressors are mono) set up after the mix and the amps, will become mono.

From my experience regarding clean tones on dirty amps, the JCM800 has some nice clean sounds, and soldano, witch are very bassy (great for jazz).The soldano on pod, have all 3 channels, clean-crunch-overdrive, while the mid gain amps (plexi, park, 45, have both channels also.) Regarding routeing, you can set path A a, ac30 and B a soldano, set mix on center, and decrease the volume of the solo from the mixer, while you increase the AC. This is not a pure mono signal, though. Regarding transition, you can do the above, put a panner on the pedal, and switch between amps with your foot easily and at the timing you need (fast, slow, up to you) On your last question, I can not help you since I use only the usb. BUT have in mind that dual paths are only for 500 from the pedalss.

Well, as an ex user of the XT live, I can tell you that the pod is another kind of beast.And as for the price, for good or bad, line 6 has always less price than the quality it gives for any device.

Tah, you get me !!! :)

Tried the hard reset by pressing and holding the left arrow when you plug in the power cable?

But, you can adjust the volume of each amp separately, and save them one by one with your personal configurations. To do the saving, simply press the model knob for 4-5 seconds, until the led of the knob from fixed go to flashing and again to fixed. Repeat the process to each amp separately.

What about the 69?What graphteck possible to use?

Why you don't do it manually? go to the http://line6.com/software/ select from the left column the HD500, and from the middle column the drivers.

Nice one Zap! Enjoy!

Completely agree Clay-man.

I don't have another jtv than my 69s, but it definitely has less sustain than my 700 that is mahogany. I am pretty positive you are correct one this one.

They do sound spacey, but only out of the mix,the best adjustment you can do is to adjust on the mix!

you can not delete it from the pod.You can copy an empty patch, paste on desktop, and copy-paste at the tone you like to erase.

I do not own a 400- I have 500, but the lag is there , about 0.3 of a second, but without turning off the sound.on looper everything is on time, no sound is loss.Best suggestion, open a ticket and sent for repair..

Wow! I never tried this configuration.Too bad that the HD not have the junior 90s. Thanks for sharing your experience! Take care, my friend. Waiting for whatever new you come up with!

They do sound nice, but the 1.9 was veri different,,,And many ppl loved that sound.

Where are the patches? Regarding fatness, Hurghanico pointed you to the correct way, just follow his instructions.I could say, for additional thickness, put some decay and a bit of thump to your cabin!

Welcome! Now for that one , I am not sure if it gonna help you, but it's worth to check it out. http://line6.com/data/6/0a060b316ac34f0593fabe278/application/pdf/M13/M9/M5%20FX%20Parameters%20-%20English%20(%20Rev%20B%20).pdf I know that pod has also a similar manual, but this is more organized, and since it is the same effects, I prefer this.

Guys I will try my best to recreate the 1.9 tone of the strat to 2.0. BUT I need some help. I need somebody to record all the 5 positions of the strat 1.9 without any amp or effects. I know I can roll back to 1.9 and do it by myself, but I worry a bit to do it. (maybe some problems will appear that I didn't have before) So, anybody kind enough to help me?

Sorry mate, my mistake.It is adobe not excel... HD Model Sheets Firmware v2.pdf

Well, honestly the sound on the couldn't stand the weather sounds a bit off IMO,Meaning could be a bit fatter.But no, the rest are ok.

Indeed, somebody has.I will upload it today or tomorrow.